geometry_run9.C

Go to the documentation of this file.

// construct detector geometry
void geometry(FairRunSim* fRun)
{
    // Set Material file Name
    fRun->SetMaterials("media.geo");
 
    // -----   Create passive volumes   -------------------------
    FairModule* cave = new FairCave("CAVE");
    cave->SetGeometryFileName("cave.geo");
    fRun->AddModule(cave);
 
    FairModule* magnet = new FairMagnet("MAGNET");
    magnet->SetGeometryFileName("magnet_modified.root");
    fRun->AddModule(magnet);
 
    FairModule* target = new FairTarget("Target");
    target->SetGeometryFileName("target_CsI.geo");
    fRun->AddModule(target);
 
    FairModule* pipe1 = new FairPipe("Pipe_sec1");
    pipe1->SetGeometryFileName("VacuumPipe_section1_Run8.root");
    fRun->AddModule(pipe1);
 
    FairModule* pipe2 = new FairPipe("Pipe_sec2");
    pipe2->SetGeometryFileName("VacuumPipe_section2_Run8.root");
    fRun->AddModule(pipe2);
 
    FairModule* pipe3 = new FairPipe("Pipe_sec3");
    pipe3->SetGeometryFileName("VacuumPipe_section3_Run8.root");
    fRun->AddModule(pipe3);
 
    // -----   Create detectors        -------------------------
 
    FairDetector* sibt = new BmnSiBT("SiBT", kTRUE);
    sibt->SetGeometryFileName("SiBT_Run9_detailed.root");
    fRun->AddModule(sibt);
 
    FairDetector* siprof = new BmnSiProf("SiProf", kTRUE);
    siprof->SetGeometryFileName("SiProf_Run9_detailed.root");
    fRun->AddModule(siprof);
 
    FairDetector* bd = new BmnBd("BD", kTRUE);
    bd->SetGeometryFileName("BD_run9.root");
    fRun->AddModule(bd);
 
    FairDetector* fd = new BmnFD("FD", kTRUE);
    fd->SetGeometryFileName("FD_run9.root");
    fRun->AddModule(fd);
 
    FairDetector* vsp = new BmnVSP("VSP", kTRUE);
    vsp->SetGeometryFileName("VSP_Run9.root");
    fRun->AddModule(vsp);
 
    FairDetector* silicon = new BmnSilicon("SILICON", kTRUE);
    silicon->SetGeometryFileName("Silicon_Run9_detailed.root");
    fRun->AddModule(silicon);
 
    FairDetector* gems = new CbmSts("GEM", kTRUE);
    gems->SetGeometryFileName("GEMS_Run9_detailed.root");
    fRun->AddModule(gems);
 
    FairDetector* csc = new BmnCSC("CSC", kTRUE);
    csc->SetGeometryFileName("CSC_Run9_detailed.root");
    fRun->AddModule(csc);
 
    FairDetector* tof1 = new BmnTOF1("TOF400", kTRUE);
    tof1->SetGeometryFileName("TOF400_RUN9.root");
    fRun->AddModule(tof1);
 
    FairDetector* tof2 = new BmnTOF701("TOF700", kTRUE);
    tof2->SetGeometryFileName("tof700_RUN9_v1.root");
    fRun->AddModule(tof2);
 
    // FairDetector* ecal = new BmnEcal("ECAL", kTRUE);
    // ecal->SetGeometryFileName("ECAL_v3_run8_pos5.root");
    // fRun->AddModule(ecal);
 
    FairDetector* scwall = new BmnScWall("SCWALL", kTRUE);
    scwall->SetGeometryFileName("ScWall_geo_period9.root");
    fRun->AddModule(scwall);
 
    FairDetector* hodo = new BmnHodo("HODO", kTRUE);
    hodo->SetGeometryFileName("Hodo_geo_period9.root");
    fRun->AddModule(hodo);
 
    // FairDetector* vacwall = new BmnVacWall("VacWall", kTRUE);
    // vacwall->SetGeometryFileName("vacBox_ONEDET_for_nDet_PROTOTYPE_12x12cm_15slices_Zdist_595.517cm_Ysh_0.518cm_rotY_-27.30deg_rotX_0.0deg.root");
    // vacwall->SetGeometryFileName("vacBox_ONEDET_for_nDet_PROTOTYPE_12x12cm_15slices_Zdist_838.4cm_Ysh_0.52cm_rotY_0.70deg_rotX_0.0deg.root");
    // fRun->AddModule(vacwall);
 
    FairDetector* ndet = new BmnNdet("NDET", kTRUE);
    ndet->SetGeometryFileName("Ndet_geo_period9.root");
    fRun->AddModule(ndet);
 
    FairDetector* fhcal = new BmnFHCal("FHCAL", kTRUE);
    // zdc->SetBirk();
    fhcal->SetGeometryFileName("FHCal_geo_period9.root");
    fRun->AddModule(fhcal);
}