create_rootgeom_GEMS_RunSRCSpring2018_detailed.C

Go to the documentation of this file.

/*
 * Use this macro to create detailed
 * ROOT geometry for the RunSRCSpring2018 configuration
 * (BM@N RUN-7:SRC) with passive volumes (frames, al. cable supports, ...)
 *
 * Created: 29.09.2020
 * 02.03.2021 (Updated): radius of hole in active zone (4.0 -> 6.0 cm)
 * 22.03.2021 (Updated): material layers and frames for inclined small GEMs added
 * Author: Baranov D.
 */
 
#include "TGeoVolume.h"
 
// Set Parameters of GEMS -------------------------------------------------------
const Int_t NStations = 10;    // stations in the detector
const Int_t NMaxModules = 2;   // max. number of modules in a station
 
//(X-Y-Z)Positions of stations (sensitive volumes)
// const Double_t XStationPositions[NStations] = { 0.0 /*0*/, 0.0 /*1*/, 0.0 /*2*/, 0.0 /*3*/, 0.0 /*4*/, 0.0 /*5*/, 0.0
// /*6*/, 0.0 /*7*/, 0.0 /*8*/, 0.0 /*9*/ }; const Double_t YStationPositions[NStations] = { 0.0 /*0*/, 0.0 /*1*/, 0.0
// /*2*/, 0.0 /*3*/, 0.0 /*4*/, 0.0 /*5*/, 0.0 /*6*/, 0.0 /*7*/, 0.0 /*8*/, 0.0 /*9*/ }; const Double_t
// ZStationPositions[NStations] = { 0.0 /*0*/, 0.0 /*1*/, 0.0 /*2*/, 0.0 /*3*/, 0.0 /*4*/, 0.0 /*5*/, 0.0 /*6*/, 0.0
// /*7*/, 0.0 /*8*/, 0.0 /*9*/ };
 
//(X-Y-Z)Positions of stations (sensitive volumes) -----------------------------
const Double_t XStationPositions[NStations] = {
    +117.22007,   // station 0 (left side: upper GEM M4)
    +117.27807,   // station 1 (left side: lower GEM M3)
    -117.51723,   // station 2 (right side: upper GEM M1)
    -115.31016,   // station 3 (right side: lower GEM M2)
    +1.0055,      // station 4 (GEM M10)
    +1.4715,      // station 5 (GEM M7)
    +2.1145,      // station 6 (GEM M5)
    +2.9225,      // station 7 (GEM M6)
    +3.6775,      // station 8 (GEM M8)
    +4.5025       // station 9 (GEM M9)
};
const Double_t YStationPositions[NStations] = {
    +16.86775,   // station 0 (left side: upper GEM M4)
    -25.90225,   // station 1 (left side: lower GEM M3)
    +16.86775,   // station 2 (right side: upper GEM M1)
    -25.76025,   // station 3 (right side: lower GEM M2)
    +7.97675,    // station 4 (GEM M10)
    +7.96375,    // station 5 (GEM M7)
    +7.64975,    // station 6 (GEM M5)
    +7.74575,    // station 7 (GEM M6)
    +8.02675,    // station 8 (GEM M8)
    +7.95175     // station 9 (GEM M9)
};
const Double_t ZStationPositions[NStations] = {
    -444.86679,   // station 0 (left side: upper GEM M4)
    -447.56632,   // station 1 (left side: lower GEM M3)
    -444.91641,   // station 2 (right side: upper GEM M1)
    -446.26916,   // station 3 (right side: lower GEM M2)
    +64.754,      // station 4 (GEM M10)
    +87.854,      // station 5 (GEM M7)
    +112.967,     // station 6 (GEM M5)
    +135.988,     // station 7 (GEM M6)
    +160.845,     // station 8 (GEM M8)
    +183.712      // station 9 (GEM M9)
};
//------------------------------------------------------------------------------
 
//(X-Y-Z)Shifts of modules in each station -------------------------------------
const Double_t XModuleShifts[NStations][NMaxModules] = {
    {0.0},                           // station 0 (left side: upper GEM M4)
    {0.0},                           // station 1 (left side: lower GEM M3)
    {0.0},                           // station 2 (right side: upper GEM M1)
    {0.0},                           // station 3 (right side: lower GEM M2)
    {163.2 * 0.25, -163.2 * 0.25},   // station 4 (GEM M10)
    {163.2 * 0.25, -163.2 * 0.25},   // station 5 (GEM M7)
    {163.2 * 0.25, -163.2 * 0.25},   // station 6 (GEM M5)
    {163.2 * 0.25, -163.2 * 0.25},   // station 7 (GEM M6)
    {163.2 * 0.25, -163.2 * 0.25},   // station 8 (GEM M8)
    {163.2 * 0.25, -163.2 * 0.25}    // station 9 (GEM M9)
};
const Double_t YModuleShifts[NStations][NMaxModules] = {
    {0.0},        // station 0 (left side: upper GEM M4)
    {0.0},        // station 1 (left side: lower GEM M3)
    {0.0},        // station 2 (right side: upper GEM M1)
    {0.0},        // station 3 (right side: lower GEM M2)
    {0.0, 0.0},   // station 4 (GEM M10)
    {0.0, 0.0},   // station 5 (GEM M7)
    {0.0, 0.0},   // station 6 (GEM M5)
    {0.0, 0.0},   // station 7 (GEM M6)
    {0.0, 0.0},   // station 8 (GEM M8)
    {0.0, 0.0}    // station 9 (GEM M9)
};
const Double_t ZModuleShifts[NStations][NMaxModules] = {
    {0.0},        // station 0 (left side: upper GEM M4)
    {0.0},        // station 1 (left side: lower GEM M3)
    {0.0},        // station 2 (right side: upper GEM M1)
    {0.0},        // station 3 (right side: lower GEM M2)
    {0.0, 0.0},   // station 4 (GEM M10)
    {0.0, 0.0},   // station 5 (GEM M7)
    {0.0, 0.0},   // station 6 (GEM M5)
    {0.0, 0.0},   // station 7 (GEM M6)
    {0.0, 0.0},   // station 8 (GEM M8)
    {0.0, 0.0}    // station 9 (GEM M9)
};
 
// rotations of stations around y-axis by 180 deg.
const Bool_t YStationRotations[NStations] = {true /*0*/,  true /*1*/, true /*2*/,  true /*3*/, true /*4*/,
                                             false /*5*/, true /*6*/, false /*7*/, true /*8*/, false /*9*/};
 
// rotations of stations around x-axis by 180 deg.
const Bool_t XStationRotations[NStations] = {false /*0*/, true /*1*/,  false /*2*/, true /*3*/,  false /*4*/,
                                             false /*5*/, false /*6*/, false /*7*/, false /*8*/, false /*9*/};
//------------------------------------------------------------------------------
 
// GEM plane sizes (66x41 type) -------------------------------------------------
const Double_t XModuleSize_Station66x41 = 66.0;
const Double_t YModuleSize_Station66x41 = 41.0;
const Double_t ZModuleSize_Station66x41 = 0.9;
const Double_t ZGEMSize_Station66x41 = 2.3;   // common thickness of GEM (including sens. vol)
 
const Double_t dXFrame_Station66x41 = 2.0;
const Double_t dYFrame_Station66x41 = 2.0;
const Double_t dZFrame_Station66x41 = 2.1;   // was 2.3 cm - thickness
//------------------------------------------------------------------------------
 
// GEM plane sizes (163x45 type) ------------------------------------------------
const Double_t XModuleSize_Station163x45 = 163.2 * 0.5;
const Double_t YModuleSize_Station163x45 = 45.0;
const Double_t ZModuleSize_Station163x45 = 0.9;   // sensitive volume
const Double_t ZGEMSize_Station163x45 = 4.1;      // common thickness of GEM (including sens. vol)
 
const Double_t dXFrame_Station163x45 = 2.0;
const Double_t dYFrame_Station163x45 = 2.0;
const Double_t dZFrame_Station163x45 = 3.9;
//------------------------------------------------------------------------------
 
// GeoManager
TGeoManager* gGeoMan = NULL;
 
// media
TGeoMedium* pMedAir = 0;
TGeoMedium* pMedCarbon = 0;
TGeoMedium* pMedFiberGlass = 0;
TGeoMedium* pMedCopper = 0;
TGeoMedium* pMedArCO27030 = 0;
TGeoMedium* pMedAluminium = 0;
TGeoMedium* pMedEpoxideCompound = 0;
TGeoMedium* pMedGlue = 0;
TGeoMedium* pMedBrass = 0;
TGeoMedium* pMedSteel = 0;
TGeoMedium* pMedHoneyComb = 0;
TGeoMedium* pMedPolyamide = 0;
 
class FairGeoMedia;
class FairGeoBuilder;
 
TGeoVolume* CreateStation(TString station_name);
 
TGeoVolume* CreateModule_Station66x41(TString module_name, Double_t xsize, Double_t ysize, Double_t zsize);
TGeoVolume* CreateLayersForModule_Station66x41(TString layer_name);
TGeoVolume* CreateFrameForModule_Station66x41(TString frame_name, Double_t dx, Double_t dy, Double_t dz);
TGeoVolume* CreateBasicFrameForModule_Station66x41(TString frame_name);
TGeoVolume* CreateDetailedFrameForModule_Station66x41(TString frame_name);
 
TGeoVolume* CreateModule_Station163x45(TString module_name,
                                       Double_t xsize,
                                       Double_t ysize,
                                       Double_t zsize,
                                       Double_t hole_radius);
TGeoVolume* CreateLayersForModule_Station163x45(TString layer_name);
TGeoVolume* CreateFrameForModule_Station163x45(TString frame_name,
                                               Double_t dx,
                                               Double_t dy,
                                               Double_t dz,
                                               Double_t hole_radius);
TGeoVolume* CreateFrameForHalfPlane_Station163x45(TString frame_name);
 
void DefineRequiredMedia(FairGeoMedia* geoMedia, FairGeoBuilder* geoBuild)
{
 
    // air medium
    FairGeoMedium* mAir = geoMedia->getMedium("air");
    if (!mAir)
        Fatal("Main", "FairMedium air not found");
    geoBuild->createMedium(mAir);
    pMedAir = gGeoManager->GetMedium("air");
    if (!pMedAir)
        Fatal("Main", "Medium air not found");
 
    // carbon medium
    FairGeoMedium* mCarbon = geoMedia->getMedium("carbon");
    if (!mCarbon)
        Fatal("Main", "FairMedium carbon not found");
    geoBuild->createMedium(mCarbon);
    pMedCarbon = gGeoManager->GetMedium("carbon");
    if (!pMedCarbon)
        Fatal("Main", "Medium carbon not found");
 
    // fiberglass medium
    FairGeoMedium* mFiberGlass = geoMedia->getMedium("fiberglass");
    if (!mFiberGlass)
        Fatal("Main", "FairMedium fiberglass not found");
    geoBuild->createMedium(mFiberGlass);
    pMedFiberGlass = gGeoManager->GetMedium("fiberglass");
    if (!pMedFiberGlass)
        Fatal("Main", "Medium fiberglass not found");
 
    // copper medium
    FairGeoMedium* mCopper = geoMedia->getMedium("copper");
    if (!mCopper)
        Fatal("Main", "FairMedium copper not found");
    geoBuild->createMedium(mCopper);
    pMedCopper = gGeoManager->GetMedium("copper");
    if (!pMedCopper)
        Fatal("Main", "Medium copper not found");
 
    // arco27020 medium
    FairGeoMedium* mArCO27030 = geoMedia->getMedium("arco27030");
    if (!mArCO27030)
        Fatal("Main", "FairMedium arco27030 not found");
    geoBuild->createMedium(mArCO27030);
    pMedArCO27030 = gGeoManager->GetMedium("arco27030");
    if (!pMedArCO27030)
        Fatal("Main", "Medium arco27030 not found");
 
    // aluminium medium
    FairGeoMedium* mAluminium = geoMedia->getMedium("aluminium");
    if (!mAluminium)
        Fatal("Main", "FairMedium aluminium not found");
    geoBuild->createMedium(mAluminium);
    pMedAluminium = gGeoManager->GetMedium("aluminium");
    if (!pMedAluminium)
        Fatal("Main", "Medium aluminium not found");
 
    // epoxide compound (for GEM frames)
    FairGeoMedium* mEpoxideCompound = geoMedia->getMedium("polyurethane_hd");
    if (!mEpoxideCompound)
        Fatal("Main", "FairMedium epoxideCompound not found");
    geoBuild->createMedium(mEpoxideCompound);
    pMedEpoxideCompound = gGeoManager->GetMedium("polyurethane_hd");
    if (!pMedEpoxideCompound)
        Fatal("Main", "Medium epoxideCompound not found");
 
    // glue
    FairGeoMedium* mGlue = geoMedia->getMedium("acrylic_glue");
    if (!mGlue)
        Fatal("Main", "FairMedium acrylic_glue not found");
    geoBuild->createMedium(mGlue);
    pMedGlue = gGeoManager->GetMedium("acrylic_glue");
    if (!pMedGlue)
        Fatal("Main", "Medium acrylic_glue not found");
 
    // brass medium
    FairGeoMedium* mBrass = geoMedia->getMedium("brass");
    if (!mBrass)
        Fatal("Main", "FairMedium brass not found");
    geoBuild->createMedium(mBrass);
    pMedBrass = gGeoManager->GetMedium("brass");
    if (!pMedBrass)
        Fatal("Main", "Medium brass not found");
 
    // steel medium
    FairGeoMedium* mSteel = geoMedia->getMedium("steel");
    if (!mSteel)
        Fatal("Main", "FairMedium steel not found");
    geoBuild->createMedium(mSteel);
    pMedSteel = gGeoManager->GetMedium("steel");
    if (!pMedSteel)
        Fatal("Main", "Medium steel not found");
 
    // honeycomb medium
    FairGeoMedium* mHoneyComb = geoMedia->getMedium("AramidHoneyComb");
    if (!mHoneyComb)
        Fatal("Main", "FairMedium AramidHoneyComb not found");
    geoBuild->createMedium(mHoneyComb);
    pMedHoneyComb = gGeoManager->GetMedium("AramidHoneyComb");
    if (!pMedHoneyComb)
        Fatal("Main", "Medium AramidHoneyComb not found");
 
    // polyamide medium
    FairGeoMedium* mPolyamide = geoMedia->getMedium("polyamide");
    if (!mPolyamide)
        Fatal("Main", "FairMedium polyamide not found");
    geoBuild->createMedium(mPolyamide);
    pMedPolyamide = gGeoManager->GetMedium("polyamide");
    if (!pMedPolyamide)
        Fatal("Main", "Medium polyamide not found");
}
 
void create_rootgeom_GEMS_RunSRCSpring2018_detailed()
{
 
    // ----  set working directory  --------------------------------------------
    TString gPath = gSystem->Getenv("VMCWORKDIR");
 
    // -------   Geometry file name (output)   ----------------------------------
    const TString geoDetectorName = "GEMS";
    const TString geoDetectorVersion = "RunSRCSpring2018_detailed";
    const TString geoFileName = gPath + "/geometry/" + geoDetectorName + "_" + geoDetectorVersion + ".root";
 
    // ----  global geometry parameters  ---------------------------------------
    FairGeoLoader* geoLoad = new FairGeoLoader("TGeo", "FairGeoLoader");
    FairGeoInterface* geoFace = geoLoad->getGeoInterface();
 
    // -------   Load media from media file   ----------------------------------
    TString medFile = gPath + "/geometry/media.geo";
    geoFace->setMediaFile(medFile);
    geoFace->readMedia();
    FairGeoMedia* geoMedia = geoFace->getMedia();
    FairGeoBuilder* geoBuild = geoLoad->getGeoBuilder();
 
    DefineRequiredMedia(geoMedia, geoBuild);
    // -------------------------------------------------------------------------
 
    // --------------   Create geometry and top volume  -------------------------
    gGeoMan = (TGeoManager*)gROOT->FindObject("FAIRGeom");
    gGeoMan->SetName(geoDetectorName + "_geom");
    TGeoVolume* top = new TGeoVolumeAssembly("TOP");
    top->SetMedium(pMedAir);
    gGeoMan->SetTopVolume(top);
    // gGeoMan->SetTopVisible(1);
    //  --------------------------------------------------------------------------
 
    // Define TOP Geometry
    TGeoVolume* GEMS = new TGeoVolumeAssembly(geoDetectorName);
    GEMS->SetMedium(pMedAir);
 
    // TGeoVolume *target = gGeoMan->MakeSphere("target", 0, 0, 5.0);
    // GEMS->AddNode(target, 0, new TGeoTranslation(0.0, 0.0, -647.476));
 
    // station 0 (small 66x41 GEM: left side: upper station)
    if (1) {
        Int_t stationNum = 0;   // station number
 
        TGeoVolume* station = CreateStation(TString("station") + TString::Itoa(stationNum, 10));
        TGeoVolume* module0 =
            CreateModule_Station66x41(TString("Sensor_module0_") + station->GetName(), XModuleSize_Station66x41,
                                      YModuleSize_Station66x41, ZModuleSize_Station66x41);
        TGeoVolume* layers0 = CreateLayersForModule_Station66x41(TString("layer0_") + station->GetName());
        // TGeoVolume *frame0 = CreateBasicFrameForModule_Station66x41(TString("frame0_")+station->GetName());
        TGeoVolume* frame0 = CreateDetailedFrameForModule_Station66x41(TString("frame0_") + station->GetName());
 
        TGeoCombiTrans* module0_transform = new TGeoCombiTrans();
        module0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                          ZModuleShifts[stationNum][0] + ZModuleSize_Station66x41 * 0.5);
        module0_transform->RotateY(+30.5843);   // deg
 
        TGeoCombiTrans* layers0_transform = new TGeoCombiTrans();
        if (YStationRotations[stationNum] == true)
            layers0_transform->ReflectZ(true);
        if (XStationRotations[stationNum] == true)
            layers0_transform->RotateX(180.0);
        layers0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                          ZModuleShifts[stationNum][0] + ZModuleSize_Station66x41 * 0.5);
        layers0_transform->RotateY(+30.5843);   // deg
 
        TGeoCombiTrans* frame0_transform = new TGeoCombiTrans();
        if (YStationRotations[stationNum] == true)
            frame0_transform->RotateY(180.0);
        if (XStationRotations[stationNum] == true)
            frame0_transform->RotateX(180.0);
        frame0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                         ZModuleShifts[stationNum][0] + ZModuleSize_Station66x41 * 0.5);
        frame0_transform->RotateY(+30.5843);   // deg
 
        TGeoCombiTrans* station_transform = new TGeoCombiTrans();
        station_transform->SetTranslation(XStationPositions[stationNum], YStationPositions[stationNum],
                                          ZStationPositions[stationNum]);
 
        station->AddNode(module0, 0, new TGeoCombiTrans(*module0_transform));   // module
        // station->AddNode(layers0, 0, new TGeoCombiTrans(*layers0_transform)); //layers
        station->AddNode(frame0, 0, new TGeoCombiTrans(*frame0_transform));   // frame
 
        GEMS->AddNode(station, 0, station_transform);
    }
 
    // station 1 (small 66x41 GEM: left side: lower station)
    if (1) {
        Int_t stationNum = 1;   // station number
 
        TGeoVolume* station = CreateStation(TString("station") + TString::Itoa(stationNum, 10));
        TGeoVolume* module0 =
            CreateModule_Station66x41(TString("Sensor_module0_") + station->GetName(), XModuleSize_Station66x41,
                                      YModuleSize_Station66x41, ZModuleSize_Station66x41);
        TGeoVolume* layers0 = CreateLayersForModule_Station66x41(TString("layer0_") + station->GetName());
        // TGeoVolume *frame0 = CreateBasicFrameForModule_Station66x41(TString("frame0_")+station->GetName());
        TGeoVolume* frame0 = CreateDetailedFrameForModule_Station66x41(TString("frame0_") + station->GetName());
 
        TGeoCombiTrans* module0_transform = new TGeoCombiTrans();
        module0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                          ZModuleShifts[stationNum][0] + ZModuleSize_Station66x41 * 0.5);
        module0_transform->RotateY(+30.5843);   // deg
 
        TGeoCombiTrans* layers0_transform = new TGeoCombiTrans();
        if (YStationRotations[stationNum] == true)
            layers0_transform->ReflectZ(true);
        if (XStationRotations[stationNum] == true)
            layers0_transform->RotateX(180.0);
        layers0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                          ZModuleShifts[stationNum][0] + ZModuleSize_Station66x41 * 0.5);
        layers0_transform->RotateY(+30.5843);   // deg
 
        TGeoCombiTrans* frame0_transform = new TGeoCombiTrans();
        if (YStationRotations[stationNum] == true)
            frame0_transform->RotateY(180.0);
        if (XStationRotations[stationNum] == true)
            frame0_transform->RotateX(180.0);
        frame0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                         ZModuleShifts[stationNum][0] + ZModuleSize_Station66x41 * 0.5);
        frame0_transform->RotateY(+30.5843);   // deg
 
        TGeoCombiTrans* station_transform = new TGeoCombiTrans();
        station_transform->SetTranslation(XStationPositions[stationNum], YStationPositions[stationNum],
                                          ZStationPositions[stationNum]);
 
        station->AddNode(module0, 0, new TGeoCombiTrans(*module0_transform));   // module
        // station->AddNode(layers0, 0, new TGeoCombiTrans(*layers0_transform)); //layers
        station->AddNode(frame0, 0, new TGeoCombiTrans(*frame0_transform));   // frame
 
        GEMS->AddNode(station, 0, station_transform);
    }
 
    // station 2 (small 66x41 GEM: right side: upper station)
    if (1) {
        Int_t stationNum = 2;   // station number
 
        TGeoVolume* station = CreateStation(TString("station") + TString::Itoa(stationNum, 10));
        TGeoVolume* module0 =
            CreateModule_Station66x41(TString("Sensor_module0_") + station->GetName(), XModuleSize_Station66x41,
                                      YModuleSize_Station66x41, ZModuleSize_Station66x41);
        TGeoVolume* layers0 = CreateLayersForModule_Station66x41(TString("layer0_") + station->GetName());
        // TGeoVolume *frame0 = CreateBasicFrameForModule_Station66x41(TString("frame0_")+station->GetName());
        TGeoVolume* frame0 = CreateDetailedFrameForModule_Station66x41(TString("frame0_") + station->GetName());
 
        TGeoCombiTrans* module0_transform = new TGeoCombiTrans();
        module0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                          ZModuleShifts[stationNum][0] + ZModuleSize_Station66x41 * 0.5);
        module0_transform->RotateY(-30.6845);   // deg
 
        TGeoCombiTrans* layers0_transform = new TGeoCombiTrans();
        if (YStationRotations[stationNum] == true)
            layers0_transform->ReflectZ(true);
        if (XStationRotations[stationNum] == true)
            layers0_transform->RotateX(180.0);
        layers0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                          ZModuleShifts[stationNum][0] + ZModuleSize_Station66x41 * 0.5);
        layers0_transform->RotateY(-30.6845);   // deg
 
        TGeoCombiTrans* frame0_transform = new TGeoCombiTrans();
        if (YStationRotations[stationNum] == true)
            frame0_transform->RotateY(180.0);
        if (XStationRotations[stationNum] == true)
            frame0_transform->RotateX(180.0);
        frame0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                         ZModuleShifts[stationNum][0] + ZModuleSize_Station66x41 * 0.5);
        frame0_transform->RotateY(-30.6845);   // deg
 
        TGeoCombiTrans* station_transform = new TGeoCombiTrans();
        station_transform->SetTranslation(XStationPositions[stationNum], YStationPositions[stationNum],
                                          ZStationPositions[stationNum]);
 
        station->AddNode(module0, 0, new TGeoCombiTrans(*module0_transform));   // module
        // station->AddNode(layers0, 0, new TGeoCombiTrans(*layers0_transform)); //layers
        station->AddNode(frame0, 0, new TGeoCombiTrans(*frame0_transform));   // frame
 
        GEMS->AddNode(station, 0, station_transform);
    }
 
    // station 3 (small 66x41 GEM: right side: lower station)
    if (1) {
        Int_t stationNum = 3;   // station number
 
        TGeoVolume* station = CreateStation(TString("station") + TString::Itoa(stationNum, 10));
        TGeoVolume* module0 =
            CreateModule_Station66x41(TString("Sensor_module0_") + station->GetName(), XModuleSize_Station66x41,
                                      YModuleSize_Station66x41, ZModuleSize_Station66x41);
        TGeoVolume* layers0 = CreateLayersForModule_Station66x41(TString("layer0_") + station->GetName());
        // TGeoVolume *frame0 = CreateBasicFrameForModule_Station66x41(TString("frame0_")+station->GetName());
        TGeoVolume* frame0 = CreateDetailedFrameForModule_Station66x41(TString("frame0_") + station->GetName());
 
        TGeoCombiTrans* module0_transform = new TGeoCombiTrans();
        module0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                          ZModuleShifts[stationNum][0] + ZModuleSize_Station66x41 * 0.5);
        module0_transform->RotateY(-30.6845);   // deg
 
        TGeoCombiTrans* layers0_transform = new TGeoCombiTrans();
        if (YStationRotations[stationNum] == true)
            layers0_transform->ReflectZ(true);
        if (XStationRotations[stationNum] == true)
            layers0_transform->RotateX(180.0);
        layers0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                          ZModuleShifts[stationNum][0] + ZModuleSize_Station66x41 * 0.5);
        layers0_transform->RotateY(-30.6845);   // deg
 
        TGeoCombiTrans* frame0_transform = new TGeoCombiTrans();
        if (YStationRotations[stationNum] == true)
            frame0_transform->RotateY(180.0);
        if (XStationRotations[stationNum] == true)
            frame0_transform->RotateX(180.0);
        frame0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                         ZModuleShifts[stationNum][0] + ZModuleSize_Station66x41 * 0.5);
        frame0_transform->RotateY(-30.6845);   // deg
 
        TGeoCombiTrans* station_transform = new TGeoCombiTrans();
        station_transform->SetTranslation(XStationPositions[stationNum], YStationPositions[stationNum],
                                          ZStationPositions[stationNum]);
 
        station->AddNode(module0, 0, new TGeoCombiTrans(*module0_transform));   // module
        // station->AddNode(layers0, 0, new TGeoCombiTrans(*layers0_transform)); //layers
        station->AddNode(frame0, 0, new TGeoCombiTrans(*frame0_transform));   // frame
 
        GEMS->AddNode(station, 0, station_transform);
    }
 
    // stations 4-9 (each is a big 163x45 GEM consisting of two modules)
    if (1) {
        for (Int_t istation = 4; istation < 10; ++istation) {
 
            Int_t stationNum = istation;
            TGeoVolume* station = CreateStation(TString("station") + TString::Itoa(stationNum, 10));
 
            TGeoVolume* module0 =
                CreateModule_Station163x45(TString("Sensor_module0_") + station->GetName(), XModuleSize_Station163x45,
                                           YModuleSize_Station163x45, ZModuleSize_Station163x45, 4.0 + 2.0);
            TGeoVolume* module1 =
                CreateModule_Station163x45(TString("Sensor_module1_") + station->GetName(), XModuleSize_Station163x45,
                                           YModuleSize_Station163x45, ZModuleSize_Station163x45, 4.0 + 2.0);
 
            TGeoVolume* layers0 = CreateLayersForModule_Station163x45(TString("layer0_") + station->GetName());
            TGeoVolume* layers1 = CreateLayersForModule_Station163x45(TString("layer1_") + station->GetName());
 
            TGeoVolume* frame = CreateFrameForHalfPlane_Station163x45(TString("frame_") + station->GetName());
 
            if (istation == 6) {
                station->SetName(TString("disabled_station") + TString::Itoa(stationNum, 10));
                module0->SetName(TString("module0_") + station->GetName());
                module1->SetName(TString("module1_") + station->GetName());
            }
 
            TGeoCombiTrans* module0_transform = new TGeoCombiTrans();
            if (XStationRotations[stationNum] == true)
                module0_transform->RotateX(180.0);
            module0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                              ZModuleShifts[stationNum][0] + ZModuleSize_Station163x45 * 0.5);
 
            TGeoCombiTrans* module1_transform = new TGeoCombiTrans();
            if (XStationRotations[stationNum] == true)
                module1_transform->RotateX(180.0);
            module1_transform->ReflectX(true);
            module1_transform->SetTranslation(XModuleShifts[stationNum][1], YModuleShifts[stationNum][1],
                                              ZModuleShifts[stationNum][1] + ZModuleSize_Station163x45 * 0.5);
 
            TGeoCombiTrans* layers0_transform = new TGeoCombiTrans();
            if (YStationRotations[stationNum] == true)
                layers0_transform->ReflectZ(true);
            if (XStationRotations[stationNum] == true)
                layers0_transform->RotateX(180.0);
            layers0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                              ZModuleShifts[stationNum][0] + ZModuleSize_Station163x45 * 0.5);
 
            TGeoCombiTrans* layers1_transform = new TGeoCombiTrans();
            if (YStationRotations[stationNum] == true)
                layers1_transform->ReflectZ(true);
            if (XStationRotations[stationNum] == true)
                layers1_transform->RotateX(180.0);
            layers1_transform->ReflectX(true);
            layers1_transform->SetTranslation(XModuleShifts[stationNum][1], YModuleShifts[stationNum][1],
                                              ZModuleShifts[stationNum][1] + ZModuleSize_Station163x45 * 0.5);
 
            TGeoCombiTrans* frame_transform = new TGeoCombiTrans();
            if (YStationRotations[stationNum] == true)
                frame_transform->RotateY(180.0);
            if (XStationRotations[stationNum] == true)
                frame_transform->RotateX(180.0);
            frame_transform->SetTranslation((XModuleShifts[stationNum][0] + XModuleShifts[stationNum][1]),
                                            YModuleShifts[stationNum][0],
                                            ZModuleShifts[stationNum][0] + ZModuleSize_Station163x45 * 0.5);
 
            TGeoCombiTrans* station_transform = new TGeoCombiTrans();
            station_transform->SetTranslation(XStationPositions[stationNum], YStationPositions[stationNum],
                                              ZStationPositions[stationNum]);
 
            station->AddNode(module0, 0, new TGeoCombiTrans(*module0_transform));   // module
            station->AddNode(module1, 1, new TGeoCombiTrans(*module1_transform));   // module
 
            station->AddNode(layers0, 0, new TGeoCombiTrans(*layers0_transform));   // layers
            station->AddNode(layers1, 1, new TGeoCombiTrans(*layers1_transform));   // layers
 
            station->AddNode(frame, 0, frame_transform);
 
            GEMS->AddNode(station, 0, station_transform);
        }
    }
 
    top->AddNode(GEMS, 0);
    top->SetVisContainers(kTRUE);
 
    // ---------------   Finish   -----------------------------------------------
    gGeoMan->CloseGeometry();
    gGeoMan->CheckOverlaps(0.0001);
    gGeoMan->PrintOverlaps();
    gGeoMan->Test();
    // gGeoMan->RestoreMasterVolume();
 
    TFile* geoFile = new TFile(geoFileName, "RECREATE");
    top->Write();
    geoFile->Close();
    top->Draw("ogl");
}
//------------------------------------------------------------------------------
 
TGeoVolume* CreateStation(TString station_name)
{
 
    TGeoVolume* stationA = new TGeoVolumeAssembly(station_name);
    stationA->SetMedium(pMedAir);
 
    return stationA;
}
 
TGeoVolume* CreateModule_Station66x41(TString module_name, Double_t xsize, Double_t ysize, Double_t zsize)
{
 
    // module shape
    TGeoShape* moduleS = new TGeoBBox("moduleS", xsize * 0.5, ysize * 0.5, zsize * 0.5);
 
    // module volume
    TGeoVolume* moduleV = new TGeoVolume(module_name, moduleS);
 
    // medium
    if (pMedArCO27030)
        moduleV->SetMedium(pMedArCO27030);
    else
        Fatal("Main", "Invalid medium for sensitive modules!");
 
    // visual parameters
    moduleV->SetLineColor(TColor::GetColor("#ff47ca"));
    moduleV->SetTransparency(20);
 
    return moduleV;
}
 
TGeoVolume* CreateLayersForModule_Station66x41(TString layer_name)
{
 
    // frame volumes
    TGeoVolume* layers = new TGeoVolumeAssembly(layer_name);
    layers->SetMedium(pMedAir);
 
    // Common parameters for all layers
    Double_t layerFront_XSize = 66.0;   // cm
    Double_t layerFront_YSize = 41.0;   // cm
    Double_t layerFront_XShift = 0.0;   // cm
    Double_t layerFront_YShift = 0.0;   // cm
 
    Double_t layerBack_XSize = 66.0;   // cm
    Double_t layerBack_YSize = 41.0;   // cm
    Double_t layerBack_XShift = 0.0;   // cm
    Double_t layerBack_YShift = 0.0;   // cm
    Double_t layerBack_ZShift = 0.0;   // cm
 
    if (layer_name == "layer0_station3")
        layerBack_ZShift = +0.2;   // z-shift for an extended module
 
    // copper layer -------------------------------------------------------------
    Double_t copperLayer_ZSize = 0.00655;    // cm;
    Double_t copperLayerHole_Radius = 6.0;   // cm
 
    // layer shape
    TGeoShape* copperLayerFrontS =
        new TGeoBBox(TString("copperLayerFrontBlankS") += TString("_") + layers->GetName(), layerFront_XSize * 0.5,
                     layerFront_YSize * 0.5, copperLayer_ZSize * 0.5);
    TGeoShape* copperLayerBackS = new TGeoBBox(TString("copperLayerBackBlankS") += TString("_") + layers->GetName(),
                                               layerBack_XSize * 0.5, layerBack_YSize * 0.5, copperLayer_ZSize * 0.5);
 
    TGeoVolume* copperLayerFrontV =
        new TGeoVolume(TString("copperLayerFrontV") += TString("_") + layers->GetName(), copperLayerFrontS);
    TGeoVolume* copperLayerBackV =
        new TGeoVolume(TString("copperLayerBackV") += TString("_") + layers->GetName(), copperLayerBackS);
 
    // volume medium
    TGeoMedium* copperLayerV_medium = pMedCopper;
    if (copperLayerV_medium) {
        copperLayerFrontV->SetMedium(copperLayerV_medium);
        copperLayerBackV->SetMedium(copperLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for copperLayerV!");
 
    // volume visual property (transparency)
    copperLayerFrontV->SetLineColor(TColor::GetColor("#ff7538"));
    copperLayerFrontV->SetTransparency(0);
    copperLayerBackV->SetLineColor(TColor::GetColor("#ff7538"));
    copperLayerBackV->SetTransparency(0);
 
    TGeoCombiTrans* copperLayerFront_transf[2];
 
    copperLayerFront_transf[0] = new TGeoCombiTrans();
    copperLayerFront_transf[0]->SetDx(+layerFront_XShift);
    copperLayerFront_transf[0]->SetDy(+layerFront_YShift);
    copperLayerFront_transf[0]->SetDz(-ZGEMSize_Station66x41 * 0.5 + copperLayer_ZSize * 0.5);
 
    TGeoCombiTrans* copperLayerBack_transf[1];
 
    copperLayerBack_transf[0] = new TGeoCombiTrans();
    copperLayerBack_transf[0]->SetDx(+layerBack_XShift);
    copperLayerBack_transf[0]->SetDy(+layerBack_YShift);
    copperLayerBack_transf[0]->SetDz(+ZGEMSize_Station66x41 * 0.5 - copperLayer_ZSize * 0.5 + layerBack_ZShift);
 
    layers->AddNode(copperLayerFrontV, 0, copperLayerFront_transf[0]);
    layers->AddNode(copperLayerBackV, 0, copperLayerBack_transf[0]);
    //--------------------------------------------------------------------------
 
    // glue layer ---------------------------------------------------------------
    Double_t glueLayer_ZSize = 0.01;       // cm; half-thickness of all glue layers
    Double_t glueLayerHole_Radius = 6.0;   // cm
 
    // layer shape
    TGeoShape* glueLayerFrontS = new TGeoBBox(TString("glueLayerFrontBlankS") += TString("_") + layers->GetName(),
                                              layerFront_XSize * 0.5, layerFront_YSize * 0.5, glueLayer_ZSize * 0.5);
    TGeoShape* glueLayerBackS = new TGeoBBox(TString("glueLayerBackBlankS") += TString("_") + layers->GetName(),
                                             layerBack_XSize * 0.5, layerBack_YSize * 0.5, glueLayer_ZSize * 0.5);
 
    TGeoVolume* glueLayerFrontV =
        new TGeoVolume(TString("glueLayerFrontV") += TString("_") + layers->GetName(), glueLayerFrontS);
    TGeoVolume* glueLayerBackV =
        new TGeoVolume(TString("glueLayerBackV") += TString("_") + layers->GetName(), glueLayerBackS);
 
    // volume medium
    TGeoMedium* glueLayerV_medium = pMedGlue;
    if (glueLayerV_medium) {
        glueLayerFrontV->SetMedium(glueLayerV_medium);
        glueLayerBackV->SetMedium(glueLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for glueLayerV!");
 
    // volume visual property (transparency)
    glueLayerFrontV->SetLineColor(TColor::GetColor("#1919ff"));
    glueLayerFrontV->SetTransparency(0);
    glueLayerBackV->SetLineColor(TColor::GetColor("#1919ff"));
    glueLayerBackV->SetTransparency(0);
 
    TGeoCombiTrans* glueLayerFront_transf[1];
 
    glueLayerFront_transf[0] = new TGeoCombiTrans();
    glueLayerFront_transf[0]->SetDx(+layerFront_XShift);
    glueLayerFront_transf[0]->SetDy(+layerFront_YShift);
    glueLayerFront_transf[0]->SetDz(-ZGEMSize_Station66x41 * 0.5 + copperLayer_ZSize + glueLayer_ZSize * 0.5);
 
    TGeoCombiTrans* glueLayerBack_transf[1];
 
    glueLayerBack_transf[0] = new TGeoCombiTrans();
    glueLayerBack_transf[0]->SetDx(+layerBack_XShift);
    glueLayerBack_transf[0]->SetDy(+layerBack_YShift);
    glueLayerBack_transf[0]->SetDz(+ZGEMSize_Station66x41 * 0.5 - copperLayer_ZSize - glueLayer_ZSize * 0.5
                                   + layerBack_ZShift);
 
    layers->AddNode(glueLayerFrontV, 0, glueLayerFront_transf[0]);
    layers->AddNode(glueLayerBackV, 0, glueLayerBack_transf[0]);
    //--------------------------------------------------------------------------
 
    // epoxide layer ------------------------------------------------------------
    Double_t epoxideLayer_ZSize = 0.105;      // cm; half-thickness of all epoxide layers
    Double_t epoxideLayerHole_Radius = 6.0;   // cm
 
    // layer shape
    TGeoShape* epoxideLayerFrontS =
        new TGeoBBox(TString("epoxideLayerFrontBlankS") += TString("_") + layers->GetName(), layerFront_XSize * 0.5,
                     layerFront_YSize * 0.5, epoxideLayer_ZSize * 0.5);
    TGeoShape* epoxideLayerBackS = new TGeoBBox(TString("epoxideLayerBackBlankS") += TString("_") + layers->GetName(),
                                                layerBack_XSize * 0.5, layerBack_YSize * 0.5, epoxideLayer_ZSize * 0.5);
 
    TGeoVolume* epoxideLayerFrontV =
        new TGeoVolume(TString("epoxideLayerFrontV") += TString("_") + layers->GetName(), epoxideLayerFrontS);
    TGeoVolume* epoxideLayerBackV =
        new TGeoVolume(TString("epoxideLayerBackV") += TString("_") + layers->GetName(), epoxideLayerBackS);
 
    // volume medium
    TGeoMedium* epoxideLayerV_medium = pMedEpoxideCompound;
    if (epoxideLayerV_medium) {
        epoxideLayerFrontV->SetMedium(epoxideLayerV_medium);
        epoxideLayerBackV->SetMedium(epoxideLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for epoxideLayerV!");
 
    // volume visual property (transparency)
    epoxideLayerFrontV->SetLineColor(TColor::GetColor("#aa33ff"));
    epoxideLayerFrontV->SetTransparency(0);
    epoxideLayerBackV->SetLineColor(TColor::GetColor("#aa33ff"));
    epoxideLayerBackV->SetTransparency(0);
 
    TGeoCombiTrans* epoxideLayerFront_transf[1];
 
    epoxideLayerFront_transf[0] = new TGeoCombiTrans();
    epoxideLayerFront_transf[0]->SetDx(+layerFront_XShift);
    epoxideLayerFront_transf[0]->SetDy(+layerFront_YShift);
    epoxideLayerFront_transf[0]->SetDz(-ZGEMSize_Station66x41 * 0.5 + copperLayer_ZSize + glueLayer_ZSize
                                       + epoxideLayer_ZSize * 0.5);
 
    TGeoCombiTrans* epoxideLayerBack_transf[1];
 
    epoxideLayerBack_transf[0] = new TGeoCombiTrans();
    epoxideLayerBack_transf[0]->SetDx(+layerBack_XShift);
    epoxideLayerBack_transf[0]->SetDy(+layerBack_YShift);
    epoxideLayerBack_transf[0]->SetDz(+ZGEMSize_Station66x41 * 0.5 - copperLayer_ZSize - glueLayer_ZSize
                                      - epoxideLayer_ZSize * 0.5 + layerBack_ZShift);
 
    layers->AddNode(epoxideLayerFrontV, 0, epoxideLayerFront_transf[0]);
    layers->AddNode(epoxideLayerBackV, 0, epoxideLayerBack_transf[0]);
    //--------------------------------------------------------------------------
 
    // honeycomb layer ----------------------------------------------------------
    // Double_t honeycombLayer_ZSize = 1.5-(0.05+0.00055+0.005+0.0125); //cm; half-thickness of all honeycomb layers
    // Double_t honeycombLayer_ZSize = 1.5-(0.06805); //cm; half-thickness of all honeycomb layers
    Double_t honeycombLayer_ZSize = 0.56;       // cm; half-thickness of all honeycomb layers
    Double_t honeycombLayerHole_Radius = 6.0;   // cm
 
    // layer shape
    TGeoShape* honeycombLayerFrontS =
        new TGeoBBox(TString("honeycombLayerFrontBlankS") += TString("_") + layers->GetName(), layerFront_XSize * 0.5,
                     layerFront_YSize * 0.5, honeycombLayer_ZSize * 0.5);
    TGeoShape* honeycombLayerBackS =
        new TGeoBBox(TString("honeycombLayerBackBlankS") += TString("_") + layers->GetName(), layerBack_XSize * 0.5,
                     layerBack_YSize * 0.5, honeycombLayer_ZSize * 0.5);
 
    TGeoVolume* honeycombLayerFrontV =
        new TGeoVolume(TString("honeycombLayerFrontV") += TString("_") + layers->GetName(), honeycombLayerFrontS);
    TGeoVolume* honeycombLayerBackV =
        new TGeoVolume(TString("honeycombLayerBackV") += TString("_") + layers->GetName(), honeycombLayerBackS);
 
    // volume medium
    TGeoMedium* honeycombLayerV_medium = pMedHoneyComb;
    if (honeycombLayerV_medium) {
        honeycombLayerFrontV->SetMedium(honeycombLayerV_medium);
        honeycombLayerBackV->SetMedium(honeycombLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for honeycombLayerV!");
 
    // volume visual property (transparency)
    honeycombLayerFrontV->SetLineColor(TColor::GetColor("#ffdf84"));
    honeycombLayerFrontV->SetTransparency(0);
    honeycombLayerBackV->SetLineColor(TColor::GetColor("#ffdf84"));
    honeycombLayerBackV->SetTransparency(0);
 
    TGeoCombiTrans* honeycombLayerFront_transf[1];
 
    honeycombLayerFront_transf[0] = new TGeoCombiTrans();
    honeycombLayerFront_transf[0]->SetDx(+layerFront_XShift);
    honeycombLayerFront_transf[0]->SetDy(+layerFront_YShift);
    honeycombLayerFront_transf[0]->SetDz(-ZGEMSize_Station66x41 * 0.5 + copperLayer_ZSize + glueLayer_ZSize
                                         + epoxideLayer_ZSize + honeycombLayer_ZSize * 0.5);
 
    TGeoCombiTrans* honeycombLayerBack_transf[1];
 
    honeycombLayerBack_transf[0] = new TGeoCombiTrans();
    honeycombLayerBack_transf[0]->SetDx(+layerBack_XShift);
    honeycombLayerBack_transf[0]->SetDy(+layerBack_YShift);
    honeycombLayerBack_transf[0]->SetDz(+ZGEMSize_Station66x41 * 0.5 - copperLayer_ZSize - glueLayer_ZSize
                                        - epoxideLayer_ZSize - honeycombLayer_ZSize * 0.5 + layerBack_ZShift);
 
    layers->AddNode(honeycombLayerFrontV, 0, honeycombLayerFront_transf[0]);
    layers->AddNode(honeycombLayerBackV, 0, honeycombLayerBack_transf[0]);
    //--------------------------------------------------------------------------
 
    // polyamide layer ----------------------------------------------------------
    Double_t polyamideLayer_ZSize = 0.0125;     // cm; half-thickness of all polyamide layers
    Double_t polyamideLayerHole_Radius = 6.0;   // cm
 
    // layer shape
    TGeoShape* polyamideLayerFrontS =
        new TGeoBBox(TString("polyamideLayerFrontBlankS") += TString("_") + layers->GetName(), layerFront_XSize * 0.5,
                     layerFront_YSize * 0.5, polyamideLayer_ZSize * 0.5);
    TGeoShape* polyamideLayerBackS =
        new TGeoBBox(TString("polyamideLayerBackBlankS") += TString("_") + layers->GetName(), layerBack_XSize * 0.5,
                     layerBack_YSize * 0.5, polyamideLayer_ZSize * 0.5);
 
    TGeoVolume* polyamideLayerFrontV =
        new TGeoVolume(TString("polyamideLayerFrontV") += TString("_") + layers->GetName(), polyamideLayerFrontS);
    TGeoVolume* polyamideLayerBackV =
        new TGeoVolume(TString("polyamideLayerBackV") += TString("_") + layers->GetName(), polyamideLayerBackS);
 
    // volume medium
    TGeoMedium* polyamideLayerV_medium = pMedPolyamide;
    if (polyamideLayerV_medium) {
        polyamideLayerFrontV->SetMedium(polyamideLayerV_medium);
        polyamideLayerBackV->SetMedium(polyamideLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for polyamideLayerV!");
 
    // volume visual property (transparency)
    polyamideLayerFrontV->SetLineColor(TColor::GetColor("#fefe22"));
    polyamideLayerFrontV->SetTransparency(0);
    polyamideLayerBackV->SetLineColor(TColor::GetColor("#fefe22"));
    polyamideLayerBackV->SetTransparency(0);
 
    TGeoCombiTrans* polyamideLayerFront_transf[1];
 
    polyamideLayerFront_transf[0] = new TGeoCombiTrans();
    polyamideLayerFront_transf[0]->SetDx(+layerFront_XShift);
    polyamideLayerFront_transf[0]->SetDy(+layerFront_YShift);
    polyamideLayerFront_transf[0]->SetDz(-ZGEMSize_Station66x41 * 0.5 + copperLayer_ZSize + glueLayer_ZSize
                                         + epoxideLayer_ZSize + honeycombLayer_ZSize + polyamideLayer_ZSize * 0.5);
 
    TGeoCombiTrans* polyamideLayerBack_transf[1];
 
    polyamideLayerBack_transf[0] = new TGeoCombiTrans();
    polyamideLayerBack_transf[0]->SetDx(+layerBack_XShift);
    polyamideLayerBack_transf[0]->SetDy(+layerBack_YShift);
    polyamideLayerBack_transf[0]->SetDz(+ZGEMSize_Station66x41 * 0.5 - copperLayer_ZSize - glueLayer_ZSize
                                        - epoxideLayer_ZSize - honeycombLayer_ZSize - polyamideLayer_ZSize * 0.5
                                        + layerBack_ZShift);
 
    layers->AddNode(polyamideLayerFrontV, 0, polyamideLayerFront_transf[0]);
    layers->AddNode(polyamideLayerBackV, 0, polyamideLayerBack_transf[0]);
    //--------------------------------------------------------------------------
 
    return layers;
}
 
TGeoVolume* CreateFrameForModule_Station66x41(TString frame_name, Double_t dx, Double_t dy, Double_t dz)
{
 
    // frame shapes
    TGeoShape* vertical_frameS =
        new TGeoBBox("vertical_frameS", dx * 0.5, YModuleSize_Station66x41 * 0.5 + dy, dz * 0.5);
    TGeoShape* horizontal_frameS =
        new TGeoBBox("horizontal_frameS", XModuleSize_Station66x41 * 0.5, dy * 0.5, dz * 0.5);
 
    // frame volumes
    TGeoVolume* composite_frameV = new TGeoVolumeAssembly(frame_name);
    TGeoVolume* vertical_frameV = new TGeoVolume(frame_name + "_vertical_frameV", vertical_frameS);
    TGeoVolume* horizontal_frameV = new TGeoVolume(frame_name + "_horizontal_frameV", horizontal_frameS);
 
    // media
    TGeoMedium* frame_medium = pMedCarbon;   // set medium
    if (pMedCarbon) {
        vertical_frameV->SetMedium(frame_medium);
        horizontal_frameV->SetMedium(frame_medium);
    } else
        Fatal("Main", "Invalid medium for frames!");
    if (pMedAir) {
        composite_frameV->SetMedium(pMedAir);
    } else
        Fatal("Main", "Invalid medium for frames!");
 
    // visual parameters
    vertical_frameV->SetLineColor(TColor::GetColor("#9999ff"));
    horizontal_frameV->SetLineColor(TColor::GetColor("#9999ff"));
 
    // frame part positions in the frame
    TGeoCombiTrans* left_vertical_frame_position = new TGeoCombiTrans();
    left_vertical_frame_position->SetTranslation(XModuleSize_Station66x41 * 0.5 + dXFrame_Station66x41 * 0.5, 0.0, 0.0);
 
    TGeoCombiTrans* right_vertical_frame_position = new TGeoCombiTrans();
    right_vertical_frame_position->SetTranslation(-XModuleSize_Station66x41 * 0.5 - dXFrame_Station66x41 * 0.5, 0.0,
                                                  0.0);
 
    TGeoCombiTrans* bottom_horizontal_frame_position = new TGeoCombiTrans();
    bottom_horizontal_frame_position->SetTranslation(0.0, YModuleSize_Station66x41 * 0.5 + dYFrame_Station66x41 * 0.5,
                                                     0.0);
 
    TGeoCombiTrans* lower_horizontal_frame_position = new TGeoCombiTrans();
    lower_horizontal_frame_position->SetTranslation(0.0, -YModuleSize_Station66x41 * 0.5 - dYFrame_Station66x41 * 0.5,
                                                    0.0);
 
    composite_frameV->AddNode(vertical_frameV, 0, left_vertical_frame_position);
    composite_frameV->AddNode(vertical_frameV, 1, right_vertical_frame_position);
    composite_frameV->AddNode(horizontal_frameV, 0, bottom_horizontal_frame_position);
    composite_frameV->AddNode(horizontal_frameV, 1, lower_horizontal_frame_position);
 
    return composite_frameV;
}
 
TGeoVolume* CreateBasicFrameForModule_Station66x41(TString frame_name)
{
 
    // frame volumes
    TGeoVolume* frames = new TGeoVolumeAssembly(frame_name);
    frames->SetMedium(pMedAir);
 
    // back epoxide frame -------------------------------------------------------
    Double_t backEpoxideFramePart_XSize = 75.1;   // cm
    Double_t backEpoxideFramePart_YSize = 48.5;   // cm
    Double_t backEpoxideFramePart_ZSize = 0.7;    // cm
 
    // layer shape
    TGeoShape* backEpoxideFramePartS = new TGeoBBox(
        TString("backEpoxideFramePartS") += TString("_") + frames->GetName(), backEpoxideFramePart_XSize * 0.5,
        backEpoxideFramePart_YSize * 0.5, backEpoxideFramePart_ZSize * 0.5);
    TGeoShape* backEpoxideActiveAreaS =
        new TGeoBBox(TString("backEpoxideActiveAreaS") += TString("_") + frames->GetName(),
                     XModuleSize_Station66x41 * 0.5, YModuleSize_Station66x41 * 0.5, ZModuleSize_Station66x41 * 0.5);
 
    TGeoTranslation* backEpoxideFramePart_pos = new TGeoTranslation();
    backEpoxideFramePart_pos->SetName("backEpoxideFramePart_pos");
    backEpoxideFramePart_pos->SetDx(-2.75 /*shift*/);
    backEpoxideFramePart_pos->SetDy(+2.05 /*shift*/);
    backEpoxideFramePart_pos->SetDz(0.0);
    backEpoxideFramePart_pos->RegisterYourself();
 
    TGeoCompositeShape* backEpoxideFrameS = new TGeoCompositeShape();
    backEpoxideFrameS->SetName(TString("backEpoxideFrameS") += TString("_") + frames->GetName());
    {
        TString expression = "backEpoxideFramePartS";
        expression += TString("_") + frames->GetName();
        expression += ":backEpoxideFramePart_pos";
        expression += "-backEpoxideActiveAreaS";
        expression += TString("_") + frames->GetName();
 
        backEpoxideFrameS->MakeNode(expression);
        backEpoxideFrameS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* backEpoxideFrameV =
        new TGeoVolume(TString("backEpoxideFrameV") += TString("_") + frames->GetName(), backEpoxideFrameS);
 
    // volume medium
    TGeoMedium* backEpoxideFrameV_medium = pMedEpoxideCompound;
    if (backEpoxideFrameV_medium) {
        backEpoxideFrameV->SetMedium(backEpoxideFrameV_medium);
    } else
        Fatal("Main", "Invalid medium for backEpoxideFrameV!");
 
    // volume visual property (transparency)
    backEpoxideFrameV->SetLineColor(TColor::GetColor("#ccccff"));
    backEpoxideFrameV->SetTransparency(0);
 
    TGeoCombiTrans* backEpoxideFrame_transf[1];
 
    backEpoxideFrame_transf[0] = new TGeoCombiTrans();
    backEpoxideFrame_transf[0]->SetDx(0.0);
    backEpoxideFrame_transf[0]->SetDy(0.0);
    backEpoxideFrame_transf[0]->SetDz(+(ZModuleSize_Station66x41 - backEpoxideFramePart_ZSize) * 0.5
                                      + backEpoxideFramePart_ZSize);
 
    frames->AddNode(backEpoxideFrameV, 0, backEpoxideFrame_transf[0]);
    //--------------------------------------------------------------------------
 
    // middle epoxide frame -----------------------------------------------------
    Double_t middleEpoxideFrameBigPart_XSize = 69.3;   // cm
    Double_t middleEpoxideFrameBigPart_YSize = 44.7;   // cm
    Double_t middleEpoxideFrameBigPart_ZSize = 0.9;    // cm
 
    Double_t middleEpoxideFrameSmallPart_XSize = 3.4;    // cm
    Double_t middleEpoxideFrameSmallPart_YSize = 16.8;   // cm
    Double_t middleEpoxideFrameSmallPart_ZSize = 0.9;    // cm
 
    Double_t middleEpoxideFrameHoleArea_XSize = 66.5;        // cm
    Double_t middleEpoxideFrameHoleArea_YSize = 41.9;        // cm
    Double_t middleEpoxideFrameHoleArea_ZSize = 0.9 + 0.1;   // cm
 
    // layer shape
    TGeoShape* middleEpoxideFrameBigPartS =
        new TGeoBBox(TString("middleEpoxideFrameBigPartS") += TString("_") + frames->GetName(),
                     middleEpoxideFrameBigPart_XSize * 0.5, middleEpoxideFrameBigPart_YSize * 0.5,
                     middleEpoxideFrameBigPart_ZSize * 0.5);
    TGeoShape* middleEpoxideFrameSmallPartS =
        new TGeoBBox(TString("middleEpoxideFrameSmallPartS") += TString("_") + frames->GetName(),
                     middleEpoxideFrameSmallPart_XSize * 0.5, middleEpoxideFrameSmallPart_YSize * 0.5,
                     middleEpoxideFrameSmallPart_ZSize * 0.5);
    TGeoShape* middleEpoxideHoleAreaS = new TGeoBBox(
        TString("middleEpoxideHoleAreaS") += TString("_") + frames->GetName(), middleEpoxideFrameHoleArea_XSize * 0.5,
        middleEpoxideFrameHoleArea_YSize * 0.5, middleEpoxideFrameHoleArea_ZSize * 0.5);
 
    TGeoTranslation* middleEpoxideFrameBigPart_pos = new TGeoTranslation();
    middleEpoxideFrameBigPart_pos->SetName("middleEpoxideFrameBigPart_pos");
    middleEpoxideFrameBigPart_pos->SetDx(0.0 /*shift*/);
    middleEpoxideFrameBigPart_pos->SetDy(+0.15 /*shift*/);
    middleEpoxideFrameBigPart_pos->SetDz(0.0);
    middleEpoxideFrameBigPart_pos->RegisterYourself();
 
    TGeoTranslation* middleEpoxideFrameSmallPart_pos = new TGeoTranslation();
    middleEpoxideFrameSmallPart_pos->SetName("middleEpoxideFrameSmallPart_pos");
    middleEpoxideFrameSmallPart_pos->SetDx(
        -(middleEpoxideFrameBigPart_XSize * 0.5 + middleEpoxideFrameSmallPart_XSize * 0.5));
    middleEpoxideFrameSmallPart_pos->SetDy(middleEpoxideFrameBigPart_YSize * 0.5
                                           - middleEpoxideFrameSmallPart_YSize * 0.5 + 0.15 /*shift*/);
    middleEpoxideFrameSmallPart_pos->SetDz(0.0);
    middleEpoxideFrameSmallPart_pos->RegisterYourself();
 
    TGeoCompositeShape* middleEpoxideFrameS = new TGeoCompositeShape();
    middleEpoxideFrameS->SetName(TString("middleEpoxideFrameS") += TString("_") + frames->GetName());
    {
        TString expression = "middleEpoxideFrameBigPartS";
        expression += TString("_") + frames->GetName();
        expression += ":middleEpoxideFrameBigPart_pos";
        expression += "-middleEpoxideHoleAreaS";
        expression += TString("_") + frames->GetName();
        expression += "+middleEpoxideFrameSmallPartS";
        expression += TString("_") + frames->GetName();
        expression += ":middleEpoxideFrameSmallPart_pos";
 
        middleEpoxideFrameS->MakeNode(expression);
        middleEpoxideFrameS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* middleEpoxideFrameV =
        new TGeoVolume(TString("middleEpoxideFrameV") += TString("_") + frames->GetName(), middleEpoxideFrameS);
 
    // volume medium
    TGeoMedium* middleEpoxideFrameV_medium = pMedEpoxideCompound;
    if (middleEpoxideFrameV_medium) {
        middleEpoxideFrameV->SetMedium(middleEpoxideFrameV_medium);
    } else
        Fatal("Main", "Invalid medium for middleEpoxideFrameV!");
 
    // volume visual property (transparency)
    middleEpoxideFrameV->SetLineColor(TColor::GetColor("#ccccff"));
    middleEpoxideFrameV->SetTransparency(0);
 
    TGeoCombiTrans* middleEpoxideFrame_transf[1];
 
    middleEpoxideFrame_transf[0] = new TGeoCombiTrans();
    middleEpoxideFrame_transf[0]->SetDx(0.0);
    middleEpoxideFrame_transf[0]->SetDy(0.0);
    middleEpoxideFrame_transf[0]->SetDz(0.0);
 
    frames->AddNode(middleEpoxideFrameV, 0, middleEpoxideFrame_transf[0]);
    //--------------------------------------------------------------------------
 
    // front epoxide frame -----------------------------------------------------
    Double_t frontEpoxideFrameBigPart_XSize = 69.5;   // cm
    Double_t frontEpoxideFrameBigPart_YSize = 44.7;   // cm
    Double_t frontEpoxideFrameBigPart_ZSize = 0.7;    // cm
 
    Double_t frontEpoxideFrameSmallPart_XSize = 3.2;    // cm
    Double_t frontEpoxideFrameSmallPart_YSize = 16.8;   // cm
    Double_t frontEpoxideFrameSmallPart_ZSize = 0.7;    // cm
 
    Double_t frontEpoxideFrameHoleArea_XSize = 66.0;        // cm
    Double_t frontEpoxideFrameHoleArea_YSize = 41.1;        // cm
    Double_t frontEpoxideFrameHoleArea_ZSize = 0.9 + 0.1;   // cm
 
    // layer shape
    TGeoShape* frontEpoxideFrameBigPartS = new TGeoBBox(
        TString("frontEpoxideFrameBigPartS") += TString("_") + frames->GetName(), frontEpoxideFrameBigPart_XSize * 0.5,
        frontEpoxideFrameBigPart_YSize * 0.5, frontEpoxideFrameBigPart_ZSize * 0.5);
    TGeoShape* frontEpoxideFrameSmallPartS =
        new TGeoBBox(TString("frontEpoxideFrameSmallPartS") += TString("_") + frames->GetName(),
                     frontEpoxideFrameSmallPart_XSize * 0.5, frontEpoxideFrameSmallPart_YSize * 0.5,
                     frontEpoxideFrameSmallPart_ZSize * 0.5);
    TGeoShape* frontEpoxideHoleAreaS = new TGeoBBox(
        TString("frontEpoxideHoleAreaS") += TString("_") + frames->GetName(), frontEpoxideFrameHoleArea_XSize * 0.5,
        frontEpoxideFrameHoleArea_YSize * 0.5, frontEpoxideFrameHoleArea_ZSize * 0.5);
 
    TGeoTranslation* frontEpoxideFrameBigPart_pos = new TGeoTranslation();
    frontEpoxideFrameBigPart_pos->SetName("frontEpoxideFrameBigPart_pos");
    frontEpoxideFrameBigPart_pos->SetDx(0.0 /*shift*/);
    frontEpoxideFrameBigPart_pos->SetDy(+0.15 /*shift*/);
    frontEpoxideFrameBigPart_pos->SetDz(0.0);
    frontEpoxideFrameBigPart_pos->RegisterYourself();
 
    TGeoTranslation* frontEpoxideFrameSmallPart_pos = new TGeoTranslation();
    frontEpoxideFrameSmallPart_pos->SetName("frontEpoxideFrameSmallPart_pos");
    frontEpoxideFrameSmallPart_pos->SetDx(
        -(frontEpoxideFrameBigPart_XSize * 0.5 + frontEpoxideFrameSmallPart_XSize * 0.5));
    frontEpoxideFrameSmallPart_pos->SetDy(frontEpoxideFrameBigPart_YSize * 0.5 - frontEpoxideFrameSmallPart_YSize * 0.5
                                          + 0.15 /*shift*/);
    frontEpoxideFrameSmallPart_pos->SetDz(0.0);
    frontEpoxideFrameSmallPart_pos->RegisterYourself();
 
    TGeoCompositeShape* frontEpoxideFrameS = new TGeoCompositeShape();
    frontEpoxideFrameS->SetName(TString("frontEpoxideFrameS") += TString("_") + frames->GetName());
    {
        TString expression = "frontEpoxideFrameBigPartS";
        expression += TString("_") + frames->GetName();
        expression += ":frontEpoxideFrameBigPart_pos";
        expression += "-frontEpoxideHoleAreaS";
        expression += TString("_") + frames->GetName();
        expression += "+frontEpoxideFrameSmallPartS";
        expression += TString("_") + frames->GetName();
        expression += ":frontEpoxideFrameSmallPart_pos";
 
        frontEpoxideFrameS->MakeNode(expression);
        frontEpoxideFrameS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* frontEpoxideFrameV =
        new TGeoVolume(TString("frontEpoxideFrameV") += TString("_") + frames->GetName(), frontEpoxideFrameS);
 
    // volume medium
    TGeoMedium* frontEpoxideFrameV_medium = pMedEpoxideCompound;
    if (frontEpoxideFrameV_medium) {
        frontEpoxideFrameV->SetMedium(frontEpoxideFrameV_medium);
    } else
        Fatal("Main", "Invalid medium for frontEpoxideFrameV!");
 
    // volume visual property (transparency)
    frontEpoxideFrameV->SetLineColor(TColor::GetColor("#ccccff"));
    frontEpoxideFrameV->SetTransparency(0);
 
    TGeoCombiTrans* frontEpoxideFrame_transf[1];
 
    frontEpoxideFrame_transf[0] = new TGeoCombiTrans();
    frontEpoxideFrame_transf[0]->SetDx(0.0);
    frontEpoxideFrame_transf[0]->SetDy(0.0);
    frontEpoxideFrame_transf[0]->SetDz(-(ZModuleSize_Station66x41 - frontEpoxideFrameBigPart_ZSize) * 0.5
                                       - frontEpoxideFrameBigPart_ZSize);
 
    frames->AddNode(frontEpoxideFrameV, 0, frontEpoxideFrame_transf[0]);
    //--------------------------------------------------------------------------
 
    return frames;
}
//------------------------------------------------------------------------------
 
TGeoVolume* CreateDetailedFrameForModule_Station66x41(TString frame_name)
{
 
    // frame volumes
    TGeoVolume* frames = new TGeoVolumeAssembly(frame_name);
    frames->SetMedium(pMedAir);
 
    // center fiberglass frame  -------------------------------------------------
    Double_t centerFiberGlassFrameSidePart_XSize = 1.45;   // cm
    Double_t centerFiberGlassFrameSidePart_YSize = 44.6;   // cm
    Double_t centerFiberGlassFrameSidePart_ZSize = 0.89;   // cm
 
    Double_t centerFiberGlassFrameLongPart_XSize = 66.5;   // cm
    Double_t centerFiberGlassFrameLongPart_YSize = 1.45;   // cm
    Double_t centerFiberGlassFrameLongPart_ZSize = 0.89;   // cm
 
    Double_t distanceBetweenFiberGlassFrameSideParts = 66.5;   // cm
    Double_t distanceBetweenFiberGlassFrameLongParts = 41.7;   // cm
 
    TGeoShape* centerFiberGlassFrameSidePartS =
        new TGeoBBox(TString("centerFiberGlassFrameSidePartS") += TString("_") + frames->GetName(),
                     centerFiberGlassFrameSidePart_XSize * 0.5, centerFiberGlassFrameSidePart_YSize * 0.5,
                     centerFiberGlassFrameSidePart_ZSize * 0.5);
    TGeoShape* centerFiberGlassFrameLongPartS =
        new TGeoBBox(TString("centerFiberGlassFrameLongPartS") += TString("_") + frames->GetName(),
                     centerFiberGlassFrameLongPart_XSize * 0.5, centerFiberGlassFrameLongPart_YSize * 0.5,
                     centerFiberGlassFrameLongPart_ZSize * 0.5);
 
    TGeoTranslation* centerFiberGlassFrameSidePart_pos1 = new TGeoTranslation();
    centerFiberGlassFrameSidePart_pos1->SetName(TString("centerFiberGlassFrameSidePart_pos1") +=
                                                TString("_") + frames->GetName());
    centerFiberGlassFrameSidePart_pos1->SetDx(
        +(distanceBetweenFiberGlassFrameSideParts + centerFiberGlassFrameSidePart_XSize) * 0.5);
    centerFiberGlassFrameSidePart_pos1->SetDy(0.0);
    centerFiberGlassFrameSidePart_pos1->SetDz(0.0);
    centerFiberGlassFrameSidePart_pos1->RegisterYourself();
 
    TGeoTranslation* centerFiberGlassFrameSidePart_pos2 = new TGeoTranslation();
    centerFiberGlassFrameSidePart_pos2->SetName(TString("centerFiberGlassFrameSidePart_pos2") +=
                                                TString("_") + frames->GetName());
    centerFiberGlassFrameSidePart_pos2->SetDx(
        -(distanceBetweenFiberGlassFrameSideParts + centerFiberGlassFrameSidePart_XSize) * 0.5);
    centerFiberGlassFrameSidePart_pos2->SetDy(0.0);
    centerFiberGlassFrameSidePart_pos2->SetDz(0.0);
    centerFiberGlassFrameSidePart_pos2->RegisterYourself();
 
    TGeoTranslation* centerFiberGlassFrameLongPart_top = new TGeoTranslation();
    centerFiberGlassFrameLongPart_top->SetName(TString("centerFiberGlassFrameLongPart_top") +=
                                               TString("_") + frames->GetName());
    centerFiberGlassFrameLongPart_top->SetDx(0.0);
    centerFiberGlassFrameLongPart_top->SetDy(
        +(distanceBetweenFiberGlassFrameLongParts + centerFiberGlassFrameLongPart_YSize) * 0.5);
    centerFiberGlassFrameLongPart_top->SetDz(0.0);
    centerFiberGlassFrameLongPart_top->RegisterYourself();
 
    TGeoTranslation* centerFiberGlassFrameLongPart_bottom = new TGeoTranslation();
    centerFiberGlassFrameLongPart_bottom->SetName(TString("centerFiberGlassFrameLongPart_bottom") +=
                                                  TString("_") + frames->GetName());
    centerFiberGlassFrameLongPart_bottom->SetDx(0.0);
    centerFiberGlassFrameLongPart_bottom->SetDy(
        -(distanceBetweenFiberGlassFrameLongParts + centerFiberGlassFrameLongPart_YSize) * 0.5);
    centerFiberGlassFrameLongPart_bottom->SetDz(0.0);
    centerFiberGlassFrameLongPart_bottom->RegisterYourself();
 
    TGeoCompositeShape* centerFiberGlassFrameS = new TGeoCompositeShape();
    centerFiberGlassFrameS->SetName(TString("centerFiberGlassFrameS") += TString("_") + frames->GetName());
    {
        TString expression = "centerFiberGlassFrameSidePartS";
        expression += TString("_") + frames->GetName();
        expression += ":centerFiberGlassFrameSidePart_pos1";
        expression += TString("_") + frames->GetName();
        expression += "+centerFiberGlassFrameSidePartS";
        expression += TString("_") + frames->GetName();
        expression += ":centerFiberGlassFrameSidePart_pos2";
        expression += TString("_") + frames->GetName();
        expression += "+centerFiberGlassFrameLongPartS";
        expression += TString("_") + frames->GetName();
        expression += ":centerFiberGlassFrameLongPart_top";
        expression += TString("_") + frames->GetName();
        expression += "+centerFiberGlassFrameLongPartS";
        expression += TString("_") + frames->GetName();
        expression += ":centerFiberGlassFrameLongPart_bottom";
        expression += TString("_") + frames->GetName();
 
        centerFiberGlassFrameS->MakeNode(expression);
        centerFiberGlassFrameS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* centerFiberGlassFrameV =
        new TGeoVolume(TString("centerFiberGlassFrameV") += TString("_") + frames->GetName(), centerFiberGlassFrameS);
 
    // volume medium
    TGeoMedium* centerFiberGlassFrameV_medium = pMedFiberGlass;
    if (centerFiberGlassFrameV_medium) {
        centerFiberGlassFrameV->SetMedium(centerFiberGlassFrameV_medium);
    } else
        Fatal("Main", "Invalid medium for centerFiberGlassFrameV!");
 
    // volume visual property (transparency)
    centerFiberGlassFrameV->SetLineColor(TColor::GetColor("#ccffcc"));
    centerFiberGlassFrameV->SetTransparency(0);
 
    TGeoCombiTrans* centerFiberGlassFrame_transf[1];
 
    centerFiberGlassFrame_transf[0] = new TGeoCombiTrans();
    centerFiberGlassFrame_transf[0]->SetDx(0.0);
    centerFiberGlassFrame_transf[0]->SetDy(0.0);
    centerFiberGlassFrame_transf[0]->SetDz(0.0);
 
    frames->AddNode(centerFiberGlassFrameV, 0, centerFiberGlassFrame_transf[0]);
    //--------------------------------------------------------------------------
 
    // center brass frame  ------------------------------------------------------
    Double_t centerBrassFrameSidePart_XSize = 1.45;    // cm
    Double_t centerBrassFrameSidePart_YSize = 44.6;    // cm
    Double_t centerBrassFrameSidePart_ZSize = 0.005;   // cm
 
    Double_t centerBrassFrameLongPart_XSize = 66.5;    // cm
    Double_t centerBrassFrameLongPart_YSize = 1.45;    // cm
    Double_t centerBrassFrameLongPart_ZSize = 0.005;   // cm
 
    Double_t distanceBetweenBrassFrameSideParts = 66.5;   // cm
    Double_t distanceBetweenBrassFrameLongParts = 41.7;   // cm
 
    TGeoShape* centerBrassFrameSidePartS = new TGeoBBox(
        TString("centerBrassFrameSidePartS") += TString("_") + frames->GetName(), centerBrassFrameSidePart_XSize * 0.5,
        centerBrassFrameSidePart_YSize * 0.5, centerBrassFrameSidePart_ZSize * 0.5);
    TGeoShape* centerBrassFrameLongPartS = new TGeoBBox(
        TString("centerBrassFrameLongPartS") += TString("_") + frames->GetName(), centerBrassFrameLongPart_XSize * 0.5,
        centerBrassFrameLongPart_YSize * 0.5, centerBrassFrameLongPart_ZSize * 0.5);
 
    TGeoTranslation* centerBrassFrameSidePart_pos1 = new TGeoTranslation();
    centerBrassFrameSidePart_pos1->SetName(TString("centerBrassFrameSidePart_pos1") +=
                                           TString("_") + frames->GetName());
    centerBrassFrameSidePart_pos1->SetDx(+(distanceBetweenBrassFrameSideParts + centerBrassFrameSidePart_XSize) * 0.5);
    centerBrassFrameSidePart_pos1->SetDy(0.0);
    centerBrassFrameSidePart_pos1->SetDz(0.0);
    centerBrassFrameSidePart_pos1->RegisterYourself();
 
    TGeoTranslation* centerBrassFrameSidePart_pos2 = new TGeoTranslation();
    centerBrassFrameSidePart_pos2->SetName(TString("centerBrassFrameSidePart_pos2") +=
                                           TString("_") + frames->GetName());
    centerBrassFrameSidePart_pos2->SetDx(-(distanceBetweenBrassFrameSideParts + centerBrassFrameSidePart_XSize) * 0.5);
    centerBrassFrameSidePart_pos2->SetDy(0.0);
    centerBrassFrameSidePart_pos2->SetDz(0.0);
    centerBrassFrameSidePart_pos2->RegisterYourself();
 
    TGeoTranslation* centerBrassFrameLongPart_top = new TGeoTranslation();
    centerBrassFrameLongPart_top->SetName(TString("centerBrassFrameLongPart_top") += TString("_") + frames->GetName());
    centerBrassFrameLongPart_top->SetDx(0.0);
    centerBrassFrameLongPart_top->SetDy(+(distanceBetweenBrassFrameLongParts + centerBrassFrameLongPart_YSize) * 0.5);
    centerBrassFrameLongPart_top->SetDz(0.0);
    centerBrassFrameLongPart_top->RegisterYourself();
 
    TGeoTranslation* centerBrassFrameLongPart_bottom = new TGeoTranslation();
    centerBrassFrameLongPart_bottom->SetName(TString("centerBrassFrameLongPart_bottom") +=
                                             TString("_") + frames->GetName());
    centerBrassFrameLongPart_bottom->SetDx(0.0);
    centerBrassFrameLongPart_bottom->SetDy(-(distanceBetweenBrassFrameLongParts + centerBrassFrameLongPart_YSize)
                                           * 0.5);
    centerBrassFrameLongPart_bottom->SetDz(0.0);
    centerBrassFrameLongPart_bottom->RegisterYourself();
 
    TGeoCompositeShape* centerBrassFrameS = new TGeoCompositeShape();
    centerBrassFrameS->SetName(TString("centerBrassFrameS") += TString("_") + frames->GetName());
    {
        TString expression = "centerBrassFrameSidePartS";
        expression += TString("_") + frames->GetName();
        expression += ":centerBrassFrameSidePart_pos1";
        expression += TString("_") + frames->GetName();
        expression += "+centerBrassFrameSidePartS";
        expression += TString("_") + frames->GetName();
        expression += ":centerBrassFrameSidePart_pos2";
        expression += TString("_") + frames->GetName();
        expression += "+centerBrassFrameLongPartS";
        expression += TString("_") + frames->GetName();
        expression += ":centerBrassFrameLongPart_top";
        expression += TString("_") + frames->GetName();
        expression += "+centerBrassFrameLongPartS";
        expression += TString("_") + frames->GetName();
        expression += ":centerBrassFrameLongPart_bottom";
        expression += TString("_") + frames->GetName();
 
        centerBrassFrameS->MakeNode(expression);
        centerBrassFrameS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* centerBrassFrameV =
        new TGeoVolume(TString("centerBrassFrameV") += TString("_") + frames->GetName(), centerBrassFrameS);
 
    // volume medium
    TGeoMedium* centerBrassFrameV_medium = pMedBrass;
    if (centerBrassFrameV_medium) {
        centerBrassFrameV->SetMedium(centerBrassFrameV_medium);
    } else
        Fatal("Main", "Invalid medium for centerBrassFrameV!");
 
    // volume visual property (transparency)
    centerBrassFrameV->SetLineColor(TColor::GetColor("#f07422"));
    centerBrassFrameV->SetTransparency(0);
 
    TGeoCombiTrans* centerBrassFrame_transf[1];
 
    centerBrassFrame_transf[0] = new TGeoCombiTrans();
    centerBrassFrame_transf[0]->SetDx(0.0);
    centerBrassFrame_transf[0]->SetDy(0.0);
    centerBrassFrame_transf[0]->SetDz(
        -(centerFiberGlassFrameSidePart_ZSize * 0.5 + centerBrassFrameSidePart_ZSize * 0.5));
 
    frames->AddNode(centerBrassFrameV, 0, centerBrassFrame_transf[0]);
    //--------------------------------------------------------------------------
 
    // center steel frame  ------------------------------------------------------
    Double_t centerSteelFrameSidePart_XSize = 1.45;    // cm
    Double_t centerSteelFrameSidePart_YSize = 44.6;    // cm
    Double_t centerSteelFrameSidePart_ZSize = 0.005;   // cm
 
    Double_t centerSteelFrameLongPart_XSize = 66.5;    // cm
    Double_t centerSteelFrameLongPart_YSize = 1.45;    // cm
    Double_t centerSteelFrameLongPart_ZSize = 0.005;   // cm
 
    Double_t distanceBetweenSteelFrameSideParts = 66.5;   // cm
    Double_t distanceBetweenSteelFrameLongParts = 41.7;   // cm
 
    TGeoShape* centerSteelFrameSidePartS = new TGeoBBox(
        TString("centerSteelFrameSidePartS") += TString("_") + frames->GetName(), centerSteelFrameSidePart_XSize * 0.5,
        centerSteelFrameSidePart_YSize * 0.5, centerSteelFrameSidePart_ZSize * 0.5);
    TGeoShape* centerSteelFrameLongPartS = new TGeoBBox(
        TString("centerSteelFrameLongPartS") += TString("_") + frames->GetName(), centerSteelFrameLongPart_XSize * 0.5,
        centerSteelFrameLongPart_YSize * 0.5, centerSteelFrameLongPart_ZSize * 0.5);
 
    TGeoTranslation* centerSteelFrameSidePart_pos1 = new TGeoTranslation();
    centerSteelFrameSidePart_pos1->SetName(TString("centerSteelFrameSidePart_pos1") +=
                                           TString("_") + frames->GetName());
    centerSteelFrameSidePart_pos1->SetDx(+(distanceBetweenSteelFrameSideParts + centerSteelFrameSidePart_XSize) * 0.5);
    centerSteelFrameSidePart_pos1->SetDy(0.0);
    centerSteelFrameSidePart_pos1->SetDz(0.0);
    centerSteelFrameSidePart_pos1->RegisterYourself();
 
    TGeoTranslation* centerSteelFrameSidePart_pos2 = new TGeoTranslation();
    centerSteelFrameSidePart_pos2->SetName(TString("centerSteelFrameSidePart_pos2") +=
                                           TString("_") + frames->GetName());
    centerSteelFrameSidePart_pos2->SetDx(-(distanceBetweenSteelFrameSideParts + centerSteelFrameSidePart_XSize) * 0.5);
    centerSteelFrameSidePart_pos2->SetDy(0.0);
    centerSteelFrameSidePart_pos2->SetDz(0.0);
    centerSteelFrameSidePart_pos2->RegisterYourself();
 
    TGeoTranslation* centerSteelFrameLongPart_top = new TGeoTranslation();
    centerSteelFrameLongPart_top->SetName(TString("centerSteelFrameLongPart_top") += TString("_") + frames->GetName());
    centerSteelFrameLongPart_top->SetDx(0.0);
    centerSteelFrameLongPart_top->SetDy(+(distanceBetweenSteelFrameLongParts + centerSteelFrameLongPart_YSize) * 0.5);
    centerSteelFrameLongPart_top->SetDz(0.0);
    centerSteelFrameLongPart_top->RegisterYourself();
 
    TGeoTranslation* centerSteelFrameLongPart_bottom = new TGeoTranslation();
    centerSteelFrameLongPart_bottom->SetName(TString("centerSteelFrameLongPart_bottom") +=
                                             TString("_") + frames->GetName());
    centerSteelFrameLongPart_bottom->SetDx(0.0);
    centerSteelFrameLongPart_bottom->SetDy(-(distanceBetweenSteelFrameLongParts + centerSteelFrameLongPart_YSize)
                                           * 0.5);
    centerSteelFrameLongPart_bottom->SetDz(0.0);
    centerSteelFrameLongPart_bottom->RegisterYourself();
 
    TGeoCompositeShape* centerSteelFrameS = new TGeoCompositeShape();
    centerSteelFrameS->SetName(TString("centerSteelFrameS") += TString("_") + frames->GetName());
    {
        TString expression = "centerSteelFrameSidePartS";
        expression += TString("_") + frames->GetName();
        expression += ":centerSteelFrameSidePart_pos1";
        expression += TString("_") + frames->GetName();
        expression += "+centerSteelFrameSidePartS";
        expression += TString("_") + frames->GetName();
        expression += ":centerSteelFrameSidePart_pos2";
        expression += TString("_") + frames->GetName();
        expression += "+centerSteelFrameLongPartS";
        expression += TString("_") + frames->GetName();
        expression += ":centerSteelFrameLongPart_top";
        expression += TString("_") + frames->GetName();
        expression += "+centerSteelFrameLongPartS";
        expression += TString("_") + frames->GetName();
        expression += ":centerSteelFrameLongPart_bottom";
        expression += TString("_") + frames->GetName();
 
        centerSteelFrameS->MakeNode(expression);
        centerSteelFrameS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* centerSteelFrameV =
        new TGeoVolume(TString("centerSteelFrameV") += TString("_") + frames->GetName(), centerSteelFrameS);
 
    // volume medium
    TGeoMedium* centerSteelFrameV_medium = pMedSteel;
    if (centerSteelFrameV_medium) {
        centerSteelFrameV->SetMedium(centerSteelFrameV_medium);
    } else
        Fatal("Main", "Invalid medium for centerSteelFrameV!");
 
    // volume visual property (transparency)
    centerSteelFrameV->SetLineColor(TColor::GetColor("#42aaff"));
    centerSteelFrameV->SetTransparency(0);
 
    TGeoCombiTrans* centerSteelFrame_transf[1];
 
    centerSteelFrame_transf[0] = new TGeoCombiTrans();
    centerSteelFrame_transf[0]->SetDx(0.0);
    centerSteelFrame_transf[0]->SetDy(0.0);
    centerSteelFrame_transf[0]->SetDz(-(centerFiberGlassFrameSidePart_ZSize * 0.5 + centerSteelFrameSidePart_ZSize
                                        + centerSteelFrameSidePart_ZSize * 0.5));
 
    frames->AddNode(centerSteelFrameV, 0, centerSteelFrame_transf[0]);
    //--------------------------------------------------------------------------
 
    // upper fiberglass side block ----------------------------------------------
    Double_t upperFiberGlassSideBlock_XSize = 3.3;    // cm
    Double_t upperFiberGlassSideBlock_YSize = 16.8;   // cm
    Double_t upperFiberGlassSideBlock_ZSize = 1.6;    // cm
 
    TGeoShape* upperFiberGlassSideBlockS = new TGeoBBox(
        TString("upperFiberGlassSideBlockS") += TString("_") + frames->GetName(), upperFiberGlassSideBlock_XSize * 0.5,
        upperFiberGlassSideBlock_YSize * 0.5, upperFiberGlassSideBlock_ZSize * 0.5);
 
    TGeoVolume* upperFiberGlassSideBlockV = new TGeoVolume(
        TString("upperFiberGlassSideBlockV") += TString("_") + frames->GetName(), upperFiberGlassSideBlockS);
 
    // volume medium
    TGeoMedium* upperFiberGlassSideBlockV_medium = pMedFiberGlass;
    if (upperFiberGlassSideBlockV_medium) {
        upperFiberGlassSideBlockV->SetMedium(upperFiberGlassSideBlockV_medium);
    } else
        Fatal("Main", "Invalid medium for upperFiberGlassSideBlockV!");
 
    // volume visual property (transparency)
    upperFiberGlassSideBlockV->SetLineColor(TColor::GetColor("#ccffcc"));
    upperFiberGlassSideBlockV->SetTransparency(0);
 
    TGeoCombiTrans* upperFiberGlassSideBlock_transf[1];
 
    upperFiberGlassSideBlock_transf[0] = new TGeoCombiTrans();
    upperFiberGlassSideBlock_transf[0]->SetDx(-(distanceBetweenFiberGlassFrameSideParts * 0.5
                                                + centerFiberGlassFrameSidePart_XSize
                                                + upperFiberGlassSideBlock_XSize * 0.5));
    upperFiberGlassSideBlock_transf[0]->SetDy(
        +(centerFiberGlassFrameSidePart_YSize * 0.5 - upperFiberGlassSideBlock_YSize * 0.5));
    upperFiberGlassSideBlock_transf[0]->SetDz(
        -(upperFiberGlassSideBlock_ZSize * 0.5 - centerFiberGlassFrameSidePart_ZSize * 0.5));
 
    frames->AddNode(upperFiberGlassSideBlockV, 0, upperFiberGlassSideBlock_transf[0]);
    //--------------------------------------------------------------------------
 
    // FRONT COVER  =============================================================
    Double_t frontFiberGlassCover_XSize = 69.4;    // cm
    Double_t frontFiberGlassCover_YSize = 44.6;    // cm
    Double_t frontFiberGlassCover_ZSize = 0.692;   // cm
 
    Double_t frontCover_dXshift = 0.0;                    // cm
    Double_t frontCover_dYshift = +0.1 * 0.5 /*shift*/;   // cm
    Double_t frontCover_dZshift = -centerFiberGlassFrameSidePart_ZSize * 0.5 - centerSteelFrameSidePart_ZSize
                                  - centerSteelFrameSidePart_ZSize;   // cm
 
    // small epoxide inner layer ------------------------------------------------
    Double_t smallEpoxideInnerLayer_XSize = 65.6;                // cm
    Double_t smallEpoxideInnerLayer_YSize = 41.6;                // cm
    Double_t smallEpoxideInnerLayer_ZSize = 0.05 + 0.01 * 0.5;   // cm
 
    TGeoShape* smallEpoxideInnerLayerS = new TGeoBBox(
        TString("smallEpoxideInnerLayerS") += TString("_") + frames->GetName(), smallEpoxideInnerLayer_XSize * 0.5,
        smallEpoxideInnerLayer_YSize * 0.5, smallEpoxideInnerLayer_ZSize * 0.5);
 
    TGeoVolume* smallEpoxideInnerLayerV =
        new TGeoVolume(TString("smallEpoxideInnerLayerV") += TString("_") + frames->GetName(), smallEpoxideInnerLayerS);
 
    // volume medium
    TGeoMedium* smallEpoxideInnerLayerV_medium = pMedEpoxideCompound;
    if (smallEpoxideInnerLayerV_medium) {
        smallEpoxideInnerLayerV->SetMedium(smallEpoxideInnerLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for smallEpoxideInnerLayerV!");
 
    // volume visual property (transparency)
    smallEpoxideInnerLayerV->SetLineColor(TColor::GetColor("#aa33ff"));
    smallEpoxideInnerLayerV->SetTransparency(0);
 
    TGeoCombiTrans* smallEpoxideInnerLayer_transf[1];
 
    smallEpoxideInnerLayer_transf[0] = new TGeoCombiTrans();
    smallEpoxideInnerLayer_transf[0]->SetDx(frontCover_dXshift);
    smallEpoxideInnerLayer_transf[0]->SetDy(frontCover_dYshift);
    smallEpoxideInnerLayer_transf[0]->SetDz(-smallEpoxideInnerLayer_ZSize * 0.5 + frontCover_dZshift);
 
    frames->AddNode(smallEpoxideInnerLayerV, 0, smallEpoxideInnerLayer_transf[0]);
    //--------------------------------------------------------------------------
 
    // small honeycomb layer ----------------------------------------------------
    Double_t smallHoneyCombLayer_XSize = 65.6;    // cm
    Double_t smallHoneyCombLayer_YSize = 41.6;    // cm
    Double_t smallHoneyCombLayer_ZSize = 0.592;   // cm
 
    TGeoShape* smallHoneyCombLayerS =
        new TGeoBBox(TString("smallHoneyCombLayerS") += TString("_") + frames->GetName(),
                     smallHoneyCombLayer_XSize * 0.5, smallHoneyCombLayer_YSize * 0.5, smallHoneyCombLayer_ZSize * 0.5);
 
    TGeoVolume* smallHoneyCombLayerV =
        new TGeoVolume(TString("smallHoneyCombLayerV") += TString("_") + frames->GetName(), smallHoneyCombLayerS);
 
    // volume medium
    TGeoMedium* smallHoneyCombLayerV_medium = pMedHoneyComb;
    if (smallHoneyCombLayerV_medium) {
        smallHoneyCombLayerV->SetMedium(smallHoneyCombLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for smallHoneyCombLayerV!");
 
    // volume visual property (transparency)
    smallHoneyCombLayerV->SetLineColor(TColor::GetColor("#ffdf84"));
    smallHoneyCombLayerV->SetTransparency(0);
 
    TGeoCombiTrans* smallHoneyCombLayer_transf[1];
 
    smallHoneyCombLayer_transf[0] = new TGeoCombiTrans();
    smallHoneyCombLayer_transf[0]->SetDx(frontCover_dXshift);
    smallHoneyCombLayer_transf[0]->SetDy(frontCover_dYshift);
    smallHoneyCombLayer_transf[0]->SetDz(-smallHoneyCombLayer_ZSize * 0.5 - smallEpoxideInnerLayer_ZSize
                                         + frontCover_dZshift);
 
    frames->AddNode(smallHoneyCombLayerV, 0, smallHoneyCombLayer_transf[0]);
    //--------------------------------------------------------------------------
 
    // small epoxide outer layer ------------------------------------------------
    Double_t smallEpoxideOuterLayer_XSize = 65.6;   // cm
    Double_t smallEpoxideOuterLayer_YSize = 41.6;   // cm
    Double_t smallEpoxideOuterLayer_ZSize = 0.05;   // cm
 
    TGeoShape* smallEpoxideOuterLayerS = new TGeoBBox(
        TString("smallEpoxideOuterLayerS") += TString("_") + frames->GetName(), smallEpoxideOuterLayer_XSize * 0.5,
        smallEpoxideOuterLayer_YSize * 0.5, smallEpoxideOuterLayer_ZSize * 0.5);
 
    TGeoVolume* smallEpoxideOuterLayerV =
        new TGeoVolume(TString("smallEpoxideOuterLayerV") += TString("_") + frames->GetName(), smallEpoxideOuterLayerS);
 
    // volume medium
    TGeoMedium* smallEpoxideOuterLayerV_medium = pMedEpoxideCompound;
    if (smallEpoxideOuterLayerV_medium) {
        smallEpoxideOuterLayerV->SetMedium(smallEpoxideOuterLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for smallEpoxideOuterLayerV!");
 
    // volume visual property (transparency)
    smallEpoxideOuterLayerV->SetLineColor(TColor::GetColor("#aa33ff"));
    smallEpoxideOuterLayerV->SetTransparency(0);
 
    TGeoCombiTrans* smallEpoxideOuterLayer_transf[1];
 
    smallEpoxideOuterLayer_transf[0] = new TGeoCombiTrans();
    smallEpoxideOuterLayer_transf[0]->SetDx(frontCover_dXshift);
    smallEpoxideOuterLayer_transf[0]->SetDy(frontCover_dYshift);
    smallEpoxideOuterLayer_transf[0]->SetDz(-smallEpoxideOuterLayer_ZSize * 0.5 - smallHoneyCombLayer_ZSize
                                            - smallEpoxideInnerLayer_ZSize + frontCover_dZshift);
 
    frames->AddNode(smallEpoxideOuterLayerV, 0, smallEpoxideOuterLayer_transf[0]);
    //--------------------------------------------------------------------------
 
    // small fiberglass frame ---------------------------------------------------
    Double_t smallFiberGlassFrameLowerPart_XSize = 65.6;    // cm
    Double_t smallFiberGlassFrameLowerPart_YSize = 1.55;    // cm
    Double_t smallFiberGlassFrameLowerPart_ZSize = 0.692;   // cm
 
    Double_t smallFiberGlassFrameUpperPart_XSize = 65.6;    // cm
    Double_t smallFiberGlassFrameUpperPart_YSize = 1.45;    // cm
    Double_t smallFiberGlassFrameUpperPart_ZSize = 0.692;   // cm
 
    Double_t smallFiberGlassFrameSidePart_XSize = 1.9;     // cm
    Double_t smallFiberGlassFrameSidePart_YSize = 44.6;    // cm
    Double_t smallFiberGlassFrameSidePart_ZSize = 0.692;   // cm
 
    TGeoShape* smallFiberGlassFrameLowerPartS =
        new TGeoBBox(TString("smallFiberGlassFrameLowerPartS") += TString("_") + frames->GetName(),
                     smallFiberGlassFrameLowerPart_XSize * 0.5, smallFiberGlassFrameLowerPart_YSize * 0.5,
                     smallFiberGlassFrameLowerPart_ZSize * 0.5);
    TGeoShape* smallFiberGlassFrameUpperPartS =
        new TGeoBBox(TString("smallFiberGlassFrameUpperPartS") += TString("_") + frames->GetName(),
                     smallFiberGlassFrameUpperPart_XSize * 0.5, smallFiberGlassFrameUpperPart_YSize * 0.5,
                     smallFiberGlassFrameUpperPart_ZSize * 0.5);
    TGeoShape* smallFiberGlassFrameSidePartS =
        new TGeoBBox(TString("smallFiberGlassFrameSidePartS") += TString("_") + frames->GetName(),
                     smallFiberGlassFrameSidePart_XSize * 0.5, smallFiberGlassFrameSidePart_YSize * 0.5,
                     smallFiberGlassFrameSidePart_ZSize * 0.5);
 
    TGeoTranslation* smallFiberGlassFrameLowerPart_pos = new TGeoTranslation();
    smallFiberGlassFrameLowerPart_pos->SetName(TString("smallFiberGlassFrameLowerPart_pos") +=
                                               TString("_") + frames->GetName());
    smallFiberGlassFrameLowerPart_pos->SetDx(0.0);
    smallFiberGlassFrameLowerPart_pos->SetDy(-smallEpoxideInnerLayer_YSize * 0.5
                                             - smallFiberGlassFrameLowerPart_YSize * 0.5);
    smallFiberGlassFrameLowerPart_pos->SetDz(0.0);
    smallFiberGlassFrameLowerPart_pos->RegisterYourself();
 
    TGeoTranslation* smallFiberGlassFrameUpperPart_pos = new TGeoTranslation();
    smallFiberGlassFrameUpperPart_pos->SetName(TString("smallFiberGlassFrameUpperPart_pos") +=
                                               TString("_") + frames->GetName());
    smallFiberGlassFrameUpperPart_pos->SetDx(0.0);
    smallFiberGlassFrameUpperPart_pos->SetDy(smallEpoxideInnerLayer_YSize * 0.5
                                             + smallFiberGlassFrameUpperPart_YSize * 0.5);
    smallFiberGlassFrameUpperPart_pos->SetDz(0.0);
    smallFiberGlassFrameUpperPart_pos->RegisterYourself();
 
    TGeoTranslation* smallFiberGlassFrameSidePart_pos1 = new TGeoTranslation();
    smallFiberGlassFrameSidePart_pos1->SetName(TString("smallFiberGlassFrameSidePart_pos1") +=
                                               TString("_") + frames->GetName());
    smallFiberGlassFrameSidePart_pos1->SetDx(smallEpoxideInnerLayer_XSize * 0.5
                                             + smallFiberGlassFrameSidePart_XSize * 0.5);
    smallFiberGlassFrameSidePart_pos1->SetDy((smallFiberGlassFrameUpperPart_YSize - smallFiberGlassFrameLowerPart_YSize)
                                             * 0.5);
    smallFiberGlassFrameSidePart_pos1->SetDz(0.0);
    smallFiberGlassFrameSidePart_pos1->RegisterYourself();
 
    TGeoTranslation* smallFiberGlassFrameSidePart_pos2 = new TGeoTranslation();
    smallFiberGlassFrameSidePart_pos2->SetName(TString("smallFiberGlassFrameSidePart_pos2") +=
                                               TString("_") + frames->GetName());
    smallFiberGlassFrameSidePart_pos2->SetDx(
        -(smallEpoxideInnerLayer_XSize * 0.5 + smallFiberGlassFrameSidePart_XSize * 0.5));
    smallFiberGlassFrameSidePart_pos2->SetDy((smallFiberGlassFrameUpperPart_YSize - smallFiberGlassFrameLowerPart_YSize)
                                             * 0.5);
    smallFiberGlassFrameSidePart_pos2->SetDz(0.0);
    smallFiberGlassFrameSidePart_pos2->RegisterYourself();
 
    TGeoCompositeShape* smallFiberGlassFrameS = new TGeoCompositeShape();
    smallFiberGlassFrameS->SetName(TString("smallFiberGlassFrameS") += TString("_") + frames->GetName());
    {
        TString expression = "smallFiberGlassFrameLowerPartS";
        expression += TString("_") + frames->GetName();
        expression += ":smallFiberGlassFrameLowerPart_pos";
        expression += TString("_") + frames->GetName();
        expression += "+smallFiberGlassFrameUpperPartS";
        expression += TString("_") + frames->GetName();
        expression += ":smallFiberGlassFrameUpperPart_pos";
        expression += TString("_") + frames->GetName();
        expression += "+smallFiberGlassFrameSidePartS";
        expression += TString("_") + frames->GetName();
        expression += ":smallFiberGlassFrameSidePart_pos1";
        expression += TString("_") + frames->GetName();
        expression += "+smallFiberGlassFrameSidePartS";
        expression += TString("_") + frames->GetName();
        expression += ":smallFiberGlassFrameSidePart_pos2";
        expression += TString("_") + frames->GetName();
 
        smallFiberGlassFrameS->MakeNode(expression);
        smallFiberGlassFrameS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* smallFiberGlassFrameV =
        new TGeoVolume(TString("smallFiberGlassFrameV") += TString("_") + frames->GetName(), smallFiberGlassFrameS);
 
    // volume medium
    TGeoMedium* smallFiberGlassFrameV_medium = pMedFiberGlass;
    if (smallFiberGlassFrameV_medium) {
        smallFiberGlassFrameV->SetMedium(smallFiberGlassFrameV_medium);
    } else
        Fatal("Main", "Invalid medium for smallFiberGlassFrameV!");
 
    // volume visual property (transparency)
    smallFiberGlassFrameV->SetLineColor(TColor::GetColor("#ccffcc"));
    smallFiberGlassFrameV->SetTransparency(0);
 
    TGeoCombiTrans* smallFiberGlassFrame_transf[1];
 
    smallFiberGlassFrame_transf[0] = new TGeoCombiTrans();
    smallFiberGlassFrame_transf[0]->SetDx(frontCover_dXshift);
    smallFiberGlassFrame_transf[0]->SetDy(frontCover_dYshift);
    smallFiberGlassFrame_transf[0]->SetDz(-smallFiberGlassFrameLowerPart_ZSize * 0.5 + frontCover_dZshift);
 
    frames->AddNode(smallFiberGlassFrameV, 0, smallFiberGlassFrame_transf[0]);
    //--------------------------------------------------------------------------
 
    // small glue layer ---------------------------------------------------------
    Double_t smallGlueLayer_XSize = 69.4;            // cm
    Double_t smallGlueLayer_YSize = 44.6;            // cm
    Double_t smallGlueLayer_ZSize = 0.005 + 0.005;   // cm (total one side thickness)
 
    TGeoShape* smallGlueLayerS =
        new TGeoBBox(TString("smallGlueLayerS") += TString("_") + frames->GetName(), smallGlueLayer_XSize * 0.5,
                     smallGlueLayer_YSize * 0.5, smallGlueLayer_ZSize * 0.5);
 
    TGeoVolume* smallGlueLayerV =
        new TGeoVolume(TString("smallGlueLayerV") += TString("_") + frames->GetName(), smallGlueLayerS);
 
    // volume medium
    TGeoMedium* smallGlueLayerV_medium = pMedGlue;
    if (smallGlueLayerV_medium) {
        smallGlueLayerV->SetMedium(smallGlueLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for smallGlueLayerV!");
 
    // volume visual property (transparency)
    smallGlueLayerV->SetLineColor(TColor::GetColor("#eeeeee"));
    smallGlueLayerV->SetTransparency(0);
 
    TGeoCombiTrans* smallGlueLayer_transf[1];
 
    smallGlueLayer_transf[0] = new TGeoCombiTrans();
    smallGlueLayer_transf[0]->SetDx(0.0);
    smallGlueLayer_transf[0]->SetDy(0.0);
    smallGlueLayer_transf[0]->SetDz(-smallGlueLayer_ZSize * 0.5 - smallEpoxideOuterLayer_ZSize
                                    - smallHoneyCombLayer_ZSize - smallEpoxideInnerLayer_ZSize + frontCover_dZshift);
 
    frames->AddNode(smallGlueLayerV, 0, smallGlueLayer_transf[0]);
    //--------------------------------------------------------------------------
 
    // small polyamide layer ----------------------------------------------------
    Double_t smallPolyamideLayer_XSize = 69.4;         // cm
    Double_t smallPolyamideLayer_YSize = 44.6;         // cm
    Double_t smallPolyamideLayer_ZSize = 0.02 * 0.5;   // cm
 
    TGeoShape* smallPolyamideLayerS =
        new TGeoBBox(TString("smallPolyamideLayerS") += TString("_") + frames->GetName(),
                     smallPolyamideLayer_XSize * 0.5, smallPolyamideLayer_YSize * 0.5, smallPolyamideLayer_ZSize * 0.5);
 
    TGeoVolume* smallPolyamideLayerV =
        new TGeoVolume(TString("smallPolyamideLayerV") += TString("_") + frames->GetName(), smallPolyamideLayerS);
 
    // volume medium
    TGeoMedium* smallPolyamideLayerV_medium = pMedPolyamide;
    if (smallPolyamideLayerV_medium) {
        smallPolyamideLayerV->SetMedium(smallPolyamideLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for smallPolyamideLayerV!");
 
    // volume visual property (transparency)
    smallPolyamideLayerV->SetLineColor(TColor::GetColor("#fefe22"));
    smallPolyamideLayerV->SetTransparency(0);
 
    TGeoCombiTrans* smallPolyamideLayer_transf[1];
 
    smallPolyamideLayer_transf[0] = new TGeoCombiTrans();
    smallPolyamideLayer_transf[0]->SetDx(0.0);
    smallPolyamideLayer_transf[0]->SetDy(0.0);
    smallPolyamideLayer_transf[0]->SetDz(-smallPolyamideLayer_ZSize * 0.5 - smallGlueLayer_ZSize
                                         - smallEpoxideOuterLayer_ZSize - smallHoneyCombLayer_ZSize
                                         - smallEpoxideInnerLayer_ZSize + frontCover_dZshift);
 
    frames->AddNode(smallPolyamideLayerV, 0, smallPolyamideLayer_transf[0]);
    //--------------------------------------------------------------------------
 
    // small copper layer ------------------------------------------------
    Double_t smallCopperLayer_XSize = 69.4;                                   // cm
    Double_t smallCopperLayer_YSize = 44.6;                                   // cm
    Double_t smallCopperLayer_ZSize = 0.0035 + 0.0061 * 0.5 /*inside gem*/;   // cm
 
    TGeoShape* smallCopperLayerS =
        new TGeoBBox(TString("smallCopperLayerS") += TString("_") + frames->GetName(), smallCopperLayer_XSize * 0.5,
                     smallCopperLayer_YSize * 0.5, smallCopperLayer_ZSize * 0.5);
 
    TGeoVolume* smallCopperLayerV =
        new TGeoVolume(TString("smallCopperLayerV") += TString("_") + frames->GetName(), smallCopperLayerS);
 
    // volume medium
    TGeoMedium* smallCopperLayerV_medium = pMedCopper;
    if (smallCopperLayerV_medium) {
        smallCopperLayerV->SetMedium(smallCopperLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for smallCopperLayerV!");
 
    // volume visual property (transparency)
    smallCopperLayerV->SetLineColor(TColor::GetColor("#ff7538"));
    smallCopperLayerV->SetTransparency(0);
 
    TGeoCombiTrans* smallCopperLayer_transf[1];
 
    smallCopperLayer_transf[0] = new TGeoCombiTrans();
    smallCopperLayer_transf[0]->SetDx(0.0);
    smallCopperLayer_transf[0]->SetDy(0.0);
    smallCopperLayer_transf[0]->SetDz(-smallCopperLayer_ZSize * 0.5 - smallPolyamideLayer_ZSize - smallGlueLayer_ZSize
                                      - smallEpoxideOuterLayer_ZSize - smallHoneyCombLayer_ZSize
                                      - smallEpoxideInnerLayer_ZSize + frontCover_dZshift);
 
    frames->AddNode(smallCopperLayerV, 0, smallCopperLayer_transf[0]);
    //--------------------------------------------------------------------------
    //==========================================================================
 
    // BACK COVER ===============================================================
    Double_t backFiberGlassCover_XSize = 75.3;    // cm
    Double_t backFiberGlassCover_YSize = 48.5;    // cm
    Double_t backFiberGlassCover_ZSize = 0.662;   // cm
 
    Double_t backCover_dXshift = -0.075 /*shift*/;                                    // cm
    Double_t backCover_dYshift = -0.125 /*shift*/;                                    // cm
    Double_t backCover_dZshift = centerFiberGlassFrameSidePart_ZSize * 0.5 + 0.005;   // cm
 
    // big epoxide inner layer ------------------------------------------------
    Double_t bigEpoxideInnerLayer_XSize = 65.95;               // cm
    Double_t bigEpoxideInnerLayer_YSize = 40.85;               // cm
    Double_t bigEpoxideInnerLayer_ZSize = 0.05 + 0.01 * 0.5;   // cm
 
    TGeoShape* bigEpoxideInnerLayerS = new TGeoBBox(
        TString("bigEpoxideInnerLayerS") += TString("_") + frames->GetName(), bigEpoxideInnerLayer_XSize * 0.5,
        bigEpoxideInnerLayer_YSize * 0.5, bigEpoxideInnerLayer_ZSize * 0.5);
 
    TGeoVolume* bigEpoxideInnerLayerV =
        new TGeoVolume(TString("bigEpoxideInnerLayerV") += TString("_") + frames->GetName(), bigEpoxideInnerLayerS);
 
    // volume medium
    TGeoMedium* bigEpoxideInnerLayerV_medium = pMedEpoxideCompound;
    if (bigEpoxideInnerLayerV_medium) {
        bigEpoxideInnerLayerV->SetMedium(bigEpoxideInnerLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for bigEpoxideInnerLayerV!");
 
    // volume visual property (transparency)
    bigEpoxideInnerLayerV->SetLineColor(TColor::GetColor("#aa33ff"));
    bigEpoxideInnerLayerV->SetTransparency(0);
 
    TGeoCombiTrans* bigEpoxideInnerLayer_transf[1];
 
    bigEpoxideInnerLayer_transf[0] = new TGeoCombiTrans();
    bigEpoxideInnerLayer_transf[0]->SetDx(backCover_dXshift);
    bigEpoxideInnerLayer_transf[0]->SetDy(backCover_dYshift);
    bigEpoxideInnerLayer_transf[0]->SetDz(bigEpoxideInnerLayer_ZSize * 0.5 + backCover_dZshift);
 
    frames->AddNode(bigEpoxideInnerLayerV, 0, bigEpoxideInnerLayer_transf[0]);
    //--------------------------------------------------------------------------
 
    // big honeycomb layer ----------------------------------------------------
    Double_t bigHoneyCombLayer_XSize = 65.95;   // cm
    Double_t bigHoneyCombLayer_YSize = 40.85;   // cm
    Double_t bigHoneyCombLayer_ZSize = 0.562;   // cm
 
    TGeoShape* bigHoneyCombLayerS =
        new TGeoBBox(TString("bigHoneyCombLayerS") += TString("_") + frames->GetName(), bigHoneyCombLayer_XSize * 0.5,
                     bigHoneyCombLayer_YSize * 0.5, bigHoneyCombLayer_ZSize * 0.5);
 
    TGeoVolume* bigHoneyCombLayerV =
        new TGeoVolume(TString("bigHoneyCombLayerV") += TString("_") + frames->GetName(), bigHoneyCombLayerS);
 
    // volume medium
    TGeoMedium* bigHoneyCombLayerV_medium = pMedHoneyComb;
    if (bigHoneyCombLayerV_medium) {
        bigHoneyCombLayerV->SetMedium(bigHoneyCombLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for bigHoneyCombLayerV!");
 
    // volume visual property (transparency)
    bigHoneyCombLayerV->SetLineColor(TColor::GetColor("#ffdf84"));
    bigHoneyCombLayerV->SetTransparency(0);
 
    TGeoCombiTrans* bigHoneyCombLayer_transf[1];
 
    bigHoneyCombLayer_transf[0] = new TGeoCombiTrans();
    bigHoneyCombLayer_transf[0]->SetDx(backCover_dXshift);
    bigHoneyCombLayer_transf[0]->SetDy(backCover_dYshift);
    bigHoneyCombLayer_transf[0]->SetDz(bigHoneyCombLayer_ZSize * 0.5 + bigEpoxideInnerLayer_ZSize + backCover_dZshift);
 
    frames->AddNode(bigHoneyCombLayerV, 0, bigHoneyCombLayer_transf[0]);
    //--------------------------------------------------------------------------
 
    // big epoxide outer layer --------------------------------------------------
    Double_t bigEpoxideOuterLayer_XSize = 65.95;   // cm
    Double_t bigEpoxideOuterLayer_YSize = 40.85;   // cm
    Double_t bigEpoxideOuterLayer_ZSize = 0.05;    // cm
 
    TGeoShape* bigEpoxideOuterLayerS = new TGeoBBox(
        TString("bigEpoxideOuterLayerS") += TString("_") + frames->GetName(), bigEpoxideOuterLayer_XSize * 0.5,
        bigEpoxideOuterLayer_YSize * 0.5, bigEpoxideOuterLayer_ZSize * 0.5);
 
    TGeoVolume* bigEpoxideOuterLayerV =
        new TGeoVolume(TString("bigEpoxideOuterLayerV") += TString("_") + frames->GetName(), bigEpoxideOuterLayerS);
 
    // volume medium
    TGeoMedium* bigEpoxideOuterLayerV_medium = pMedEpoxideCompound;
    if (bigEpoxideOuterLayerV_medium) {
        bigEpoxideOuterLayerV->SetMedium(bigEpoxideOuterLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for bigEpoxideOuterLayerV!");
 
    // volume visual property (transparency)
    bigEpoxideOuterLayerV->SetLineColor(TColor::GetColor("#aa33ff"));
    bigEpoxideOuterLayerV->SetTransparency(0);
 
    TGeoCombiTrans* bigEpoxideOuterLayer_transf[1];
 
    bigEpoxideOuterLayer_transf[0] = new TGeoCombiTrans();
    bigEpoxideOuterLayer_transf[0]->SetDx(backCover_dXshift);
    bigEpoxideOuterLayer_transf[0]->SetDy(backCover_dYshift);
    bigEpoxideOuterLayer_transf[0]->SetDz(bigEpoxideOuterLayer_ZSize * 0.5 + bigHoneyCombLayer_ZSize
                                          + bigEpoxideInnerLayer_ZSize + backCover_dZshift);
 
    frames->AddNode(bigEpoxideOuterLayerV, 0, bigEpoxideOuterLayer_transf[0]);
    //--------------------------------------------------------------------------
 
    // big fiberglass frame -----------------------------------------------------
    Double_t bigFiberGlassFrameLowerPart_XSize = 65.95;   // cm
    Double_t bigFiberGlassFrameLowerPart_YSize = 1.75;    // cm
    Double_t bigFiberGlassFrameLowerPart_ZSize = 0.662;   // cm
 
    Double_t bigFiberGlassFrameUpperPart_XSize = 65.95;   // cm
    Double_t bigFiberGlassFrameUpperPart_YSize = 5.9;     // cm
    Double_t bigFiberGlassFrameUpperPart_ZSize = 0.662;   // cm
 
    Double_t bigFiberGlassFrameSmallSidePart_XSize = 1.8;     // cm
    Double_t bigFiberGlassFrameSmallSidePart_YSize = 48.5;    // cm
    Double_t bigFiberGlassFrameSmallSidePart_ZSize = 0.662;   // cm
 
    Double_t bigFiberGlassFrameBigSidePart_XSize = 7.55;    // cm
    Double_t bigFiberGlassFrameBigSidePart_YSize = 48.5;    // cm
    Double_t bigFiberGlassFrameBigSidePart_ZSize = 0.662;   // cm
 
    TGeoShape* bigFiberGlassFrameLowerPartS =
        new TGeoBBox(TString("bigFiberGlassFrameLowerPartS") += TString("_") + frames->GetName(),
                     bigFiberGlassFrameLowerPart_XSize * 0.5, bigFiberGlassFrameLowerPart_YSize * 0.5,
                     bigFiberGlassFrameLowerPart_ZSize * 0.5);
    TGeoShape* bigFiberGlassFrameUpperPartS =
        new TGeoBBox(TString("bigFiberGlassFrameUpperPartS") += TString("_") + frames->GetName(),
                     bigFiberGlassFrameUpperPart_XSize * 0.5, bigFiberGlassFrameUpperPart_YSize * 0.5,
                     bigFiberGlassFrameUpperPart_ZSize * 0.5);
    TGeoShape* bigFiberGlassFrameSmallSidePartS =
        new TGeoBBox(TString("bigFiberGlassFrameSmallSidePartS") += TString("_") + frames->GetName(),
                     bigFiberGlassFrameSmallSidePart_XSize * 0.5, bigFiberGlassFrameSmallSidePart_YSize * 0.5,
                     bigFiberGlassFrameSmallSidePart_ZSize * 0.5);
    TGeoShape* bigFiberGlassFrameBigSidePartS =
        new TGeoBBox(TString("bigFiberGlassFrameBigSidePartS") += TString("_") + frames->GetName(),
                     bigFiberGlassFrameBigSidePart_XSize * 0.5, bigFiberGlassFrameBigSidePart_YSize * 0.5,
                     bigFiberGlassFrameBigSidePart_ZSize * 0.5);
 
    TGeoTranslation* bigFiberGlassFrameLowerPart_pos = new TGeoTranslation();
    bigFiberGlassFrameLowerPart_pos->SetName(TString("bigFiberGlassFrameLowerPart_pos") +=
                                             TString("_") + frames->GetName());
    bigFiberGlassFrameLowerPart_pos->SetDx(0.0);
    bigFiberGlassFrameLowerPart_pos->SetDy(-bigEpoxideInnerLayer_YSize * 0.5 - bigFiberGlassFrameLowerPart_YSize * 0.5);
    bigFiberGlassFrameLowerPart_pos->SetDz(0.0);
    bigFiberGlassFrameLowerPart_pos->RegisterYourself();
 
    TGeoTranslation* bigFiberGlassFrameUpperPart_pos = new TGeoTranslation();
    bigFiberGlassFrameUpperPart_pos->SetName(TString("bigFiberGlassFrameUpperPart_pos") +=
                                             TString("_") + frames->GetName());
    bigFiberGlassFrameUpperPart_pos->SetDx(0.0);
    bigFiberGlassFrameUpperPart_pos->SetDy(bigEpoxideInnerLayer_YSize * 0.5 + bigFiberGlassFrameUpperPart_YSize * 0.5);
    bigFiberGlassFrameUpperPart_pos->SetDz(0.0);
    bigFiberGlassFrameUpperPart_pos->RegisterYourself();
 
    TGeoTranslation* bigFiberGlassFrameSmallSidePart_pos = new TGeoTranslation();
    bigFiberGlassFrameSmallSidePart_pos->SetName(TString("bigFiberGlassFrameSmallSidePart_pos") +=
                                                 TString("_") + frames->GetName());
    bigFiberGlassFrameSmallSidePart_pos->SetDx(bigEpoxideInnerLayer_XSize * 0.5
                                               + bigFiberGlassFrameSmallSidePart_XSize * 0.5);
    bigFiberGlassFrameSmallSidePart_pos->SetDy((bigFiberGlassFrameUpperPart_YSize - bigFiberGlassFrameLowerPart_YSize)
                                               * 0.5);
    bigFiberGlassFrameSmallSidePart_pos->SetDz(0.0);
    bigFiberGlassFrameSmallSidePart_pos->RegisterYourself();
 
    TGeoTranslation* bigFiberGlassFrameBigSidePart_pos = new TGeoTranslation();
    bigFiberGlassFrameBigSidePart_pos->SetName(TString("bigFiberGlassFrameBigSidePart_pos") +=
                                               TString("_") + frames->GetName());
    bigFiberGlassFrameBigSidePart_pos->SetDx(
        -(bigEpoxideInnerLayer_XSize * 0.5 + bigFiberGlassFrameBigSidePart_XSize * 0.5));
    bigFiberGlassFrameBigSidePart_pos->SetDy((bigFiberGlassFrameUpperPart_YSize - bigFiberGlassFrameLowerPart_YSize)
                                             * 0.5);
    bigFiberGlassFrameBigSidePart_pos->SetDz(0.0);
    bigFiberGlassFrameBigSidePart_pos->RegisterYourself();
 
    TGeoCompositeShape* bigFiberGlassFrameS = new TGeoCompositeShape();
    bigFiberGlassFrameS->SetName(TString("bigFiberGlassFrameS") += TString("_") + frames->GetName());
    {
        TString expression = "bigFiberGlassFrameLowerPartS";
        expression += TString("_") + frames->GetName();
        expression += ":bigFiberGlassFrameLowerPart_pos";
        expression += TString("_") + frames->GetName();
        expression += "+bigFiberGlassFrameUpperPartS";
        expression += TString("_") + frames->GetName();
        expression += ":bigFiberGlassFrameUpperPart_pos";
        expression += TString("_") + frames->GetName();
        expression += "+bigFiberGlassFrameSmallSidePartS";
        expression += TString("_") + frames->GetName();
        expression += ":bigFiberGlassFrameSmallSidePart_pos";
        expression += TString("_") + frames->GetName();
        expression += "+bigFiberGlassFrameBigSidePartS";
        expression += TString("_") + frames->GetName();
        expression += ":bigFiberGlassFrameBigSidePart_pos";
        expression += TString("_") + frames->GetName();
 
        bigFiberGlassFrameS->MakeNode(expression);
        bigFiberGlassFrameS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* bigFiberGlassFrameV =
        new TGeoVolume(TString("bigFiberGlassFrameV") += TString("_") + frames->GetName(), bigFiberGlassFrameS);
 
    // volume medium
    TGeoMedium* bigFiberGlassFrameV_medium = pMedFiberGlass;
    if (bigFiberGlassFrameV_medium) {
        bigFiberGlassFrameV->SetMedium(bigFiberGlassFrameV_medium);
    } else
        Fatal("Main", "Invalid medium for bigFiberGlassFrameV!");
 
    // volume visual property (transparency)
    bigFiberGlassFrameV->SetLineColor(TColor::GetColor("#ccffcc"));
    bigFiberGlassFrameV->SetTransparency(0);
 
    TGeoCombiTrans* bigFiberGlassFrame_transf[1];
 
    bigFiberGlassFrame_transf[0] = new TGeoCombiTrans();
    bigFiberGlassFrame_transf[0]->SetDx(backCover_dXshift);
    bigFiberGlassFrame_transf[0]->SetDy(backCover_dYshift);
    bigFiberGlassFrame_transf[0]->SetDz(bigFiberGlassFrameLowerPart_ZSize * 0.5 + backCover_dZshift);
 
    frames->AddNode(bigFiberGlassFrameV, 0, bigFiberGlassFrame_transf[0]);
    //--------------------------------------------------------------------------
 
    // big glue layer -----------------------------------------------------------
    Double_t bigGlueLayer_XSize = 75.3;            // cm
    Double_t bigGlueLayer_YSize = 48.5;            // cm
    Double_t bigGlueLayer_ZSize = 0.005 + 0.005;   // cm (total one side thickness)
 
    TGeoShape* bigGlueLayerS =
        new TGeoBBox(TString("bigGlueLayerS") += TString("_") + frames->GetName(), bigGlueLayer_XSize * 0.5,
                     bigGlueLayer_YSize * 0.5, bigGlueLayer_ZSize * 0.5);
 
    TGeoVolume* bigGlueLayerV =
        new TGeoVolume(TString("bigGlueLayerV") += TString("_") + frames->GetName(), bigGlueLayerS);
 
    // volume medium
    TGeoMedium* bigGlueLayerV_medium = pMedGlue;
    if (bigGlueLayerV_medium) {
        bigGlueLayerV->SetMedium(bigGlueLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for bigGlueLayerV!");
 
    // volume visual property (transparency)
    bigGlueLayerV->SetLineColor(TColor::GetColor("#eeeeee"));
    bigGlueLayerV->SetTransparency(0);
 
    TGeoCombiTrans* bigGlueLayer_transf[1];
 
    bigGlueLayer_transf[0] = new TGeoCombiTrans();
    bigGlueLayer_transf[0]->SetDx(-2.95 /*shift*/);
    bigGlueLayer_transf[0]->SetDy(+1.95 /*shift*/);
    bigGlueLayer_transf[0]->SetDz(bigGlueLayer_ZSize * 0.5 + bigEpoxideOuterLayer_ZSize + bigHoneyCombLayer_ZSize
                                  + bigEpoxideInnerLayer_ZSize + backCover_dZshift);
 
    frames->AddNode(bigGlueLayerV, 0, bigGlueLayer_transf[0]);
    //--------------------------------------------------------------------------
 
    // big polyamide layer ------------------------------------------------------
    Double_t bigPolyamideLayer_XSize = 75.3;         // cm
    Double_t bigPolyamideLayer_YSize = 48.5;         // cm
    Double_t bigPolyamideLayer_ZSize = 0.02 * 0.5;   // cm (total one side thickness)
 
    TGeoShape* bigPolyamideLayerS =
        new TGeoBBox(TString("bigPolyamideLayerS") += TString("_") + frames->GetName(), bigPolyamideLayer_XSize * 0.5,
                     bigPolyamideLayer_YSize * 0.5, bigPolyamideLayer_ZSize * 0.5);
 
    TGeoVolume* bigPolyamideLayerV =
        new TGeoVolume(TString("bigPolyamideLayerV") += TString("_") + frames->GetName(), bigPolyamideLayerS);
 
    // volume medium
    TGeoMedium* bigPolyamideLayerV_medium = pMedPolyamide;
    if (bigPolyamideLayerV_medium) {
        bigPolyamideLayerV->SetMedium(bigPolyamideLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for bigPolyamideLayerV!");
 
    // volume visual property (transparency)
    bigPolyamideLayerV->SetLineColor(TColor::GetColor("#fefe22"));
    bigPolyamideLayerV->SetTransparency(0);
 
    TGeoCombiTrans* bigPolyamideLayer_transf[1];
 
    bigPolyamideLayer_transf[0] = new TGeoCombiTrans();
    bigPolyamideLayer_transf[0]->SetDx(-2.95 /*shift*/);
    bigPolyamideLayer_transf[0]->SetDy(+1.95 /*shift*/);
    bigPolyamideLayer_transf[0]->SetDz(bigPolyamideLayer_ZSize * 0.5 + bigGlueLayer_ZSize + bigEpoxideOuterLayer_ZSize
                                       + bigHoneyCombLayer_ZSize + bigEpoxideInnerLayer_ZSize + backCover_dZshift);
 
    frames->AddNode(bigPolyamideLayerV, 0, bigPolyamideLayer_transf[0]);
    //--------------------------------------------------------------------------
 
    // big copper layer ---------------------------------------------------------
    Double_t bigCopperLayer_XSize = 75.3;                                   // cm
    Double_t bigCopperLayer_YSize = 48.5;                                   // cm
    Double_t bigCopperLayer_ZSize = 0.0035 + 0.0061 * 0.5 /*inside gem*/;   // cm
 
    TGeoShape* bigCopperLayerS =
        new TGeoBBox(TString("bigCopperLayerS") += TString("_") + frames->GetName(), bigCopperLayer_XSize * 0.5,
                     bigCopperLayer_YSize * 0.5, bigCopperLayer_ZSize * 0.5);
 
    TGeoVolume* bigCopperLayerV =
        new TGeoVolume(TString("bigCopperLayerV") += TString("_") + frames->GetName(), bigCopperLayerS);
 
    // volume medium
    TGeoMedium* bigCopperLayerV_medium = pMedCopper;
    if (bigCopperLayerV_medium) {
        bigCopperLayerV->SetMedium(bigCopperLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for bigCopperLayerV!");
 
    // volume visual property (transparency)
    bigCopperLayerV->SetLineColor(TColor::GetColor("#ff7538"));
    bigCopperLayerV->SetTransparency(0);
 
    TGeoCombiTrans* bigCopperLayer_transf[1];
 
    bigCopperLayer_transf[0] = new TGeoCombiTrans();
    bigCopperLayer_transf[0]->SetDx(-2.95 /*shift*/);
    bigCopperLayer_transf[0]->SetDy(+1.95 /*shift*/);
    bigCopperLayer_transf[0]->SetDz(bigCopperLayer_ZSize * 0.5 + bigPolyamideLayer_ZSize + bigGlueLayer_ZSize
                                    + bigEpoxideOuterLayer_ZSize + bigHoneyCombLayer_ZSize + bigEpoxideInnerLayer_ZSize
                                    + backCover_dZshift);
 
    frames->AddNode(bigCopperLayerV, 0, bigCopperLayer_transf[0]);
    //--------------------------------------------------------------------------
    //==========================================================================
 
    // big side plate -----------------------------------------------------------
    Double_t bigSidePlate_XSize = 5.2;    // cm
    Double_t bigSidePlate_YSize = 27.6;   // cm
    Double_t bigSidePlate_ZSize = 0.3;    // cm
 
    TGeoShape* bigSidePlateS =
        new TGeoBBox(TString("bigSidePlateS") += TString("_") + frames->GetName(), bigSidePlate_XSize * 0.5,
                     bigSidePlate_YSize * 0.5, bigSidePlate_ZSize * 0.5);
 
    TGeoVolume* bigSidePlateV =
        new TGeoVolume(TString("bigSidePlateV") += TString("_") + frames->GetName(), bigSidePlateS);
 
    // volume medium
    TGeoMedium* bigSidePlateV_medium = pMedAluminium;
    if (bigSidePlateV_medium) {
        bigSidePlateV->SetMedium(bigSidePlateV_medium);
    } else
        Fatal("Main", "Invalid medium for bigSidePlateV!");
 
    // volume visual property (transparency)
    bigSidePlateV->SetLineColor(TColor::GetColor("#ffcccc"));
    bigSidePlateV->SetTransparency(0);
 
    TGeoCombiTrans* bigSidePlate_transf[1];
 
    bigSidePlate_transf[0] = new TGeoCombiTrans();
    bigSidePlate_transf[0]->SetDx(-(backFiberGlassCover_XSize - frontFiberGlassCover_XSize * 0.5)
                                  - bigSidePlate_XSize * 0.5 + 3.0 /*shift*/);
    bigSidePlate_transf[0]->SetDy(-frontFiberGlassCover_YSize * 0.5 + bigSidePlate_YSize * 0.5);
    bigSidePlate_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - bigSidePlate_ZSize * 0.5);
 
    frames->AddNode(bigSidePlateV, 0, bigSidePlate_transf[0]);
    //--------------------------------------------------------------------------
 
    // big side support ---------------------------------------------------------
    Double_t bigSideSupport_XSize = 3.2;   // cm
    Double_t bigSideSupport_YSize = 26;    // cm
    Double_t bigSideSupport_ZSize = 0.6;   // cm
 
    TGeoShape* bigSideSupportS =
        new TGeoBBox(TString("bigSideSupportS") += TString("_") + frames->GetName(), bigSideSupport_XSize * 0.5,
                     bigSideSupport_YSize * 0.5, bigSideSupport_ZSize * 0.5);
 
    TGeoVolume* bigSideSupportV =
        new TGeoVolume(TString("bigSideSupportV") += TString("_") + frames->GetName(), bigSideSupportS);
 
    // volume medium
    TGeoMedium* bigSideSupportV_medium = pMedAluminium;
    if (bigSideSupportV_medium) {
        bigSideSupportV->SetMedium(bigSideSupportV_medium);
    } else
        Fatal("Main", "Invalid medium for bigSideSupportV!");
 
    // volume visual property (transparency)
    bigSideSupportV->SetLineColor(TColor::GetColor("#ffcccc"));
    bigSideSupportV->SetTransparency(0);
 
    TGeoCombiTrans* bigSideSupport_transf[1];
 
    bigSideSupport_transf[0] = new TGeoCombiTrans();
    bigSideSupport_transf[0]->SetDx(-(backFiberGlassCover_XSize - frontFiberGlassCover_XSize * 0.5)
                                    - bigSideSupport_XSize * 0.5);
    bigSideSupport_transf[0]->SetDy(-frontFiberGlassCover_YSize * 0.5 + bigSideSupport_YSize * 0.5 + 1.6 /*shift*/);
    bigSideSupport_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - bigSidePlate_ZSize
                                    - bigSideSupport_ZSize * 0.5);
 
    frames->AddNode(bigSideSupportV, 0, bigSideSupport_transf[0]);
    //--------------------------------------------------------------------------
 
    // small side plate -----------------------------------------------------------
    Double_t smallSidePlate_XSize = 4.2;   // cm
    Double_t smallSidePlate_YSize = 3.7;   // cm
    Double_t smallSidePlate_ZSize = 0.3;   // cm
 
    TGeoShape* smallSidePlateS =
        new TGeoBBox(TString("smallSidePlateS") += TString("_") + frames->GetName(), smallSidePlate_XSize * 0.5,
                     smallSidePlate_YSize * 0.5, smallSidePlate_ZSize * 0.5);
 
    TGeoVolume* smallSidePlateV =
        new TGeoVolume(TString("smallSidePlateV") += TString("_") + frames->GetName(), smallSidePlateS);
 
    // volume medium
    TGeoMedium* smallSidePlateV_medium = pMedAluminium;
    if (smallSidePlateV_medium) {
        smallSidePlateV->SetMedium(smallSidePlateV_medium);
    } else
        Fatal("Main", "Invalid medium for smallSidePlateV!");
 
    // volume visual property (transparency)
    smallSidePlateV->SetLineColor(TColor::GetColor("#ffcccc"));
    smallSidePlateV->SetTransparency(0);
 
    TGeoCombiTrans* smallSidePlate_transf[1];
 
    smallSidePlate_transf[0] = new TGeoCombiTrans();
    smallSidePlate_transf[0]->SetDx(frontFiberGlassCover_XSize * 0.5 - smallSidePlate_XSize * 0.5 + 2.2 /*shift*/);
    smallSidePlate_transf[0]->SetDy(frontFiberGlassCover_YSize * 0.5 + smallSidePlate_YSize * 0.5 + 0.2 /*shift*/);
    smallSidePlate_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - smallSidePlate_ZSize * 0.5);
 
    frames->AddNode(smallSidePlateV, 0, smallSidePlate_transf[0]);
    //--------------------------------------------------------------------------
 
    // small side support ---------------------------------------------------------
    Double_t smallSideSupport_XSize = 4.0;   // cm
    Double_t smallSideSupport_YSize = 2.4;   // cm
    Double_t smallSideSupport_ZSize = 0.6;   // cm
 
    TGeoShape* smallSideSupportS =
        new TGeoBBox(TString("smallSideSupportS") += TString("_") + frames->GetName(), smallSideSupport_XSize * 0.5,
                     smallSideSupport_YSize * 0.5, smallSideSupport_ZSize * 0.5);
 
    TGeoVolume* smallSideSupportV =
        new TGeoVolume(TString("smallSideSupportV") += TString("_") + frames->GetName(), smallSideSupportS);
 
    // volume medium
    TGeoMedium* smallSideSupportV_medium = pMedAluminium;
    if (smallSideSupportV_medium) {
        smallSideSupportV->SetMedium(smallSideSupportV_medium);
    } else
        Fatal("Main", "Invalid medium for smallSideSupportV!");
 
    // volume visual property (transparency)
    smallSideSupportV->SetLineColor(TColor::GetColor("#ffcccc"));
    smallSideSupportV->SetTransparency(0);
 
    TGeoCombiTrans* smallSideSupport_transf[1];
 
    smallSideSupport_transf[0] = new TGeoCombiTrans();
    smallSideSupport_transf[0]->SetDx(frontFiberGlassCover_XSize * 0.5 - smallSideSupport_XSize * 0.5 + 3.3 /*shift*/);
    smallSideSupport_transf[0]->SetDy(frontFiberGlassCover_YSize * 0.5 + smallSideSupport_YSize * 0.5);
    smallSideSupport_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - bigSidePlate_ZSize
                                      - bigSideSupport_ZSize * 0.5);
 
    frames->AddNode(smallSideSupportV, 0, smallSideSupport_transf[0]);
    //--------------------------------------------------------------------------
 
    // side amplifier block -----------------------------------------------------
    Double_t sideAmplifierBlock_XSize = 0.3;      // cm
    Double_t sideAmplifierBlock_YSize = 24.825;   // cm
    Double_t sideAmplifierBlock_ZSize = 8.41;     // cm
 
    TGeoShape* sideAmplifierBlockS =
        new TGeoBBox(TString("sideAmplifierBlockS") += TString("_") + frames->GetName(), sideAmplifierBlock_XSize * 0.5,
                     sideAmplifierBlock_YSize * 0.5, sideAmplifierBlock_ZSize * 0.5);
 
    TGeoVolume* sideAmplifierBlockV =
        new TGeoVolume(TString("sideAmplifierBlockV") += TString("_") + frames->GetName(), sideAmplifierBlockS);
 
    // volume medium
    TGeoMedium* sideAmplifierBlockV_medium = pMedFiberGlass;
    if (sideAmplifierBlockV_medium) {
        sideAmplifierBlockV->SetMedium(sideAmplifierBlockV_medium);
    } else
        Fatal("Main", "Invalid medium for sideAmplifierBlockV!");
 
    // volume visual property (transparency)
    sideAmplifierBlockV->SetLineColor(TColor::GetColor("#99ff99"));
    sideAmplifierBlockV->SetTransparency(0);
 
    TGeoCombiTrans* sideAmplifierBlock_transf[1];
 
    sideAmplifierBlock_transf[0] = new TGeoCombiTrans();
    sideAmplifierBlock_transf[0]->SetDx(-frontFiberGlassCover_XSize * 0.5 - sideAmplifierBlock_XSize * 0.5
                                        - 1.6 /*shift*/);
    sideAmplifierBlock_transf[0]->SetDy(-frontFiberGlassCover_YSize * 0.5 + sideAmplifierBlock_YSize * 0.5
                                        + 1.575 /*shift*/);
    sideAmplifierBlock_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - sideAmplifierBlock_ZSize * 0.5);
 
    frames->AddNode(sideAmplifierBlockV, 0, sideAmplifierBlock_transf[0]);
    //--------------------------------------------------------------------------
 
    // upper amplifier block ----------------------------------------------------
    Double_t upperAmplifierBlockOutPart_XSize = 65.6;   // cm
    Double_t upperAmplifierBlockOutPart_YSize = 0.3;    // cm
    Double_t upperAmplifierBlockOutPart_ZSize = 8.41;   // cm
 
    Double_t upperAmplifierBlockInLeftPart_XSize = 29.3;   // cm
    Double_t upperAmplifierBlockInLeftPart_YSize = 0.3;    // cm
    Double_t upperAmplifierBlockInLeftPart_ZSize = 8.41;   // cm
 
    Double_t upperAmplifierBlockInRightPart_XSize = 26.0;   // cm
    Double_t upperAmplifierBlockInRightPart_YSize = 0.3;    // cm
    Double_t upperAmplifierBlockInRightPart_ZSize = 8.41;   // cm
 
    TGeoShape* upperAmplifierBlockOutPartS =
        new TGeoBBox(TString("upperAmplifierBlockOutPartS") += TString("_") + frames->GetName(),
                     upperAmplifierBlockOutPart_XSize * 0.5, upperAmplifierBlockOutPart_YSize * 0.5,
                     upperAmplifierBlockOutPart_ZSize * 0.5);
    TGeoShape* upperAmplifierBlockInLeftPartS =
        new TGeoBBox(TString("upperAmplifierBlockInLeftPartS") += TString("_") + frames->GetName(),
                     upperAmplifierBlockInLeftPart_XSize * 0.5, upperAmplifierBlockInLeftPart_YSize * 0.5,
                     upperAmplifierBlockInLeftPart_ZSize * 0.5);
    TGeoShape* upperAmplifierBlockInRightPartS =
        new TGeoBBox(TString("upperAmplifierBlockInRightPartS") += TString("_") + frames->GetName(),
                     upperAmplifierBlockInRightPart_XSize * 0.5, upperAmplifierBlockInRightPart_YSize * 0.5,
                     upperAmplifierBlockInRightPart_ZSize * 0.5);
 
    TGeoVolume* upperAmplifierBlockOutPartV = new TGeoVolume(
        TString("upperAmplifierBlockOutPartV") += TString("_") + frames->GetName(), upperAmplifierBlockOutPartS);
    TGeoVolume* upperAmplifierBlockInLeftPartV = new TGeoVolume(
        TString("upperAmplifierBlockInLeftPartV") += TString("_") + frames->GetName(), upperAmplifierBlockInLeftPartS);
    TGeoVolume* upperAmplifierBlockInRightPartV =
        new TGeoVolume(TString("upperAmplifierBlockInRightPartV") += TString("_") + frames->GetName(),
                       upperAmplifierBlockInRightPartS);
 
    // volume medium
    TGeoMedium* upperAmplifierBlockOutPartV_medium = pMedFiberGlass;
    if (upperAmplifierBlockOutPartV_medium) {
        upperAmplifierBlockOutPartV->SetMedium(upperAmplifierBlockOutPartV_medium);
        upperAmplifierBlockInLeftPartV->SetMedium(upperAmplifierBlockOutPartV_medium);
        upperAmplifierBlockInRightPartV->SetMedium(upperAmplifierBlockOutPartV_medium);
    } else
        Fatal("Main", "Invalid medium for upperAmplifierBlock!");
 
    // volume visual property (transparency)
    upperAmplifierBlockOutPartV->SetLineColor(TColor::GetColor("#99ff99"));
    upperAmplifierBlockOutPartV->SetTransparency(0);
    upperAmplifierBlockInLeftPartV->SetLineColor(TColor::GetColor("#99ff99"));
    upperAmplifierBlockInLeftPartV->SetTransparency(0);
    upperAmplifierBlockInRightPartV->SetLineColor(TColor::GetColor("#99ff99"));
    upperAmplifierBlockInRightPartV->SetTransparency(0);
 
    TGeoCombiTrans* upperAmplifierBlock_transf[3];
 
    upperAmplifierBlock_transf[0] = new TGeoCombiTrans();
    upperAmplifierBlock_transf[0]->SetDx(frontFiberGlassCover_XSize * 0.5 - upperAmplifierBlockOutPart_XSize * 0.5
                                         - 2.0 /*shift*/);
    upperAmplifierBlock_transf[0]->SetDy(frontFiberGlassCover_YSize * 0.5 + upperAmplifierBlockOutPart_YSize * 0.5
                                         + 2.9 /*shift*/);
    upperAmplifierBlock_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5
                                         - upperAmplifierBlockOutPart_ZSize * 0.5);
 
    upperAmplifierBlock_transf[1] = new TGeoCombiTrans();
    upperAmplifierBlock_transf[1]->SetDx(frontFiberGlassCover_XSize * 0.5 - upperAmplifierBlockInLeftPart_XSize * 0.5
                                         - 6.8 /*shift*/);
    upperAmplifierBlock_transf[1]->SetDy(frontFiberGlassCover_YSize * 0.5 + upperAmplifierBlockInLeftPart_YSize * 0.5
                                         + 1.4 /*shift*/);
    upperAmplifierBlock_transf[1]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5
                                         - upperAmplifierBlockInLeftPart_ZSize * 0.5);
 
    upperAmplifierBlock_transf[2] = new TGeoCombiTrans();
    upperAmplifierBlock_transf[2]->SetDx(frontFiberGlassCover_XSize * 0.5 - upperAmplifierBlockInLeftPart_XSize
                                         - upperAmplifierBlockInRightPart_XSize * 0.5 - 7.6 /*shift*/);
    upperAmplifierBlock_transf[2]->SetDy(frontFiberGlassCover_YSize * 0.5 + upperAmplifierBlockInRightPart_YSize * 0.5
                                         + 1.4 /*shift*/);
    upperAmplifierBlock_transf[2]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5
                                         - upperAmplifierBlockInRightPart_ZSize * 0.5);
 
    frames->AddNode(upperAmplifierBlockOutPartV, 0, upperAmplifierBlock_transf[0]);
    frames->AddNode(upperAmplifierBlockInLeftPartV, 0, upperAmplifierBlock_transf[1]);
    frames->AddNode(upperAmplifierBlockInRightPartV, 0, upperAmplifierBlock_transf[2]);
    //--------------------------------------------------------------------------
 
    // side PCB -----------------------------------------------------------------
    Double_t sidePCB_XSize = 0.15;    // cm
    Double_t sidePCB_YSize = 35.05;   // cm
    Double_t sidePCB_ZSize = 4.0;     // cm
 
    TGeoShape* sidePCBS = new TGeoBBox(TString("sidePCBS") += TString("_") + frames->GetName(), sidePCB_XSize * 0.5,
                                       sidePCB_YSize * 0.5, sidePCB_ZSize * 0.5);
 
    TGeoVolume* sidePCBV = new TGeoVolume(TString("sidePCBV") += TString("_") + frames->GetName(), sidePCBS);
 
    // volume medium
    TGeoMedium* sidePCBV_medium = pMedFiberGlass;
    if (sidePCBV_medium) {
        sidePCBV->SetMedium(sidePCBV_medium);
    } else
        Fatal("Main", "Invalid medium for sidePCBV!");
 
    // volume visual property (transparency)
    sidePCBV->SetLineColor(TColor::GetColor("#55ee55"));
    sidePCBV->SetTransparency(0);
 
    TGeoCombiTrans* sidePCB_transf[1];
 
    sidePCB_transf[0] = new TGeoCombiTrans();
    sidePCB_transf[0]->SetDx(-frontFiberGlassCover_XSize * 0.5 - sidePCB_XSize * 0.5 - 0.45 /*shift*/);
    sidePCB_transf[0]->SetDy(-frontFiberGlassCover_YSize * 0.5 + sidePCB_YSize * 0.5 + 2.5 /*shift*/);
    sidePCB_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - sidePCB_ZSize * 0.5 - 4.4 /*shift*/);
 
    frames->AddNode(sidePCBV, 0, sidePCB_transf[0]);
    //--------------------------------------------------------------------------
 
    // upper PCB ----------------------------------------------------------------
    Double_t upperPCB_XSize = 70.1;   // cm
    Double_t upperPCB_YSize = 0.15;   // cm
    Double_t upperPCB_ZSize = 4.0;    // cm
 
    TGeoShape* upperPCBS = new TGeoBBox(TString("upperPCBS") += TString("_") + frames->GetName(), upperPCB_XSize * 0.5,
                                        upperPCB_YSize * 0.5, upperPCB_ZSize * 0.5);
 
    TGeoVolume* upperPCBV = new TGeoVolume(TString("upperPCBV") += TString("_") + frames->GetName(), upperPCBS);
 
    // volume medium
    TGeoMedium* upperPCBV_medium = pMedFiberGlass;
    if (upperPCBV_medium) {
        upperPCBV->SetMedium(upperPCBV_medium);
    } else
        Fatal("Main", "Invalid medium for upperPCBV!");
 
    // volume visual property (transparency)
    upperPCBV->SetLineColor(TColor::GetColor("#55ee55"));
    upperPCBV->SetTransparency(0);
 
    TGeoCombiTrans* upperPCB_transf[1];
 
    upperPCB_transf[0] = new TGeoCombiTrans();
    upperPCB_transf[0]->SetDx(frontFiberGlassCover_XSize * 0.5 - upperPCB_XSize * 0.5 - 1.7 /*shift*/);
    upperPCB_transf[0]->SetDy(frontFiberGlassCover_YSize * 0.5 + upperPCB_YSize * 0.5 + 0.1 /*shift*/);
    upperPCB_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - upperPCB_ZSize * 0.5 - 4.4 /*shift*/);
 
    frames->AddNode(upperPCBV, 0, upperPCB_transf[0]);
    //--------------------------------------------------------------------------
 
    // side bottom leg ----------------------------------------------------------
    Double_t sideBottomSmallLeg_XSize = 2.0;    // cm
    Double_t sideBottomSmallLeg_YSize = 0.46;   // cm
    Double_t sideBottomSmallLeg_ZSize = 1.9;    // cm
 
    Double_t sideBottomBigLeg_XSize = 5.4;    // cm
    Double_t sideBottomBigLeg_YSize = 0.46;   // cm
    Double_t sideBottomBigLeg_ZSize = 3.2;    // cm
 
    TGeoShape* sideBottomSmallLegS =
        new TGeoBBox(TString("sideBottomSmallLegS") += TString("_") + frames->GetName(), sideBottomSmallLeg_XSize * 0.5,
                     sideBottomSmallLeg_YSize * 0.5, sideBottomSmallLeg_ZSize * 0.5);
    TGeoShape* sideBottomBigLegS =
        new TGeoBBox(TString("sideBottomBigLegS") += TString("_") + frames->GetName(), sideBottomBigLeg_XSize * 0.5,
                     sideBottomBigLeg_YSize * 0.5, sideBottomBigLeg_ZSize * 0.5);
 
    TGeoVolume* sideBottomSmallLegV =
        new TGeoVolume(TString("sideBottomSmallLegV") += TString("_") + frames->GetName(), sideBottomSmallLegS);
    TGeoVolume* sideBottomBigLegV =
        new TGeoVolume(TString("sideBottomBigLegV") += TString("_") + frames->GetName(), sideBottomBigLegS);
 
    // volume medium
    TGeoMedium* sideBottomLeg_medium = pMedAluminium;
    if (sideBottomLeg_medium) {
        sideBottomSmallLegV->SetMedium(sideBottomLeg_medium);
        sideBottomBigLegV->SetMedium(sideBottomLeg_medium);
    } else
        Fatal("Main", "Invalid medium for sideBottomLegV!");
 
    // volume visual property (transparency)
    sideBottomSmallLegV->SetLineColor(TColor::GetColor("#ffcccc"));
    sideBottomSmallLegV->SetTransparency(0);
    sideBottomBigLegV->SetLineColor(TColor::GetColor("#ffcccc"));
    sideBottomBigLegV->SetTransparency(0);
 
    TGeoCombiTrans* sideBottomSmallLeg_transf[1];
 
    sideBottomSmallLeg_transf[0] = new TGeoCombiTrans();
    sideBottomSmallLeg_transf[0]->SetDx(-frontFiberGlassCover_XSize * 0.5 - sideBottomSmallLeg_XSize * 0.5
                                        - 2.9 /*shift*/);
    sideBottomSmallLeg_transf[0]->SetDy(-frontFiberGlassCover_YSize * 0.5 + sideBottomSmallLeg_YSize * 0.5
                                        + 1.05 /*shift*/);
    sideBottomSmallLeg_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - sideBottomSmallLeg_ZSize * 0.5
                                        - bigSidePlate_ZSize);
 
    TGeoCombiTrans* sideBottomBigLeg_transf[1];
 
    sideBottomBigLeg_transf[0] = new TGeoCombiTrans();
    sideBottomBigLeg_transf[0]->SetDx(-frontFiberGlassCover_XSize * 0.5 + sideBottomBigLeg_XSize * 0.5
                                      - sideBottomSmallLeg_XSize - 2.9 /*shift*/);
    sideBottomBigLeg_transf[0]->SetDy(-frontFiberGlassCover_YSize * 0.5 + sideBottomBigLeg_YSize * 0.5
                                      + 1.05 /*shift*/);
    sideBottomBigLeg_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - sideBottomBigLeg_ZSize * 0.5
                                      - bigSidePlate_ZSize - sideBottomSmallLeg_ZSize);
 
    frames->AddNode(sideBottomSmallLegV, 0, sideBottomSmallLeg_transf[0]);
    frames->AddNode(sideBottomBigLegV, 0, sideBottomBigLeg_transf[0]);
    //--------------------------------------------------------------------------
 
    // side top leg -------------------------------------------------------------
    Double_t sideTopSmallLeg_XSize = 2.0;    // cm
    Double_t sideTopSmallLeg_YSize = 0.56;   // cm
    Double_t sideTopSmallLeg_ZSize = 2.24;   // cm
 
    Double_t sideTopBigLeg_XSize = 4.3;    // cm
    Double_t sideTopBigLeg_YSize = 0.56;   // cm
    Double_t sideTopBigLeg_ZSize = 2.8;    // cm
 
    TGeoShape* sideTopSmallLegS =
        new TGeoBBox(TString("sideTopSmallLegS") += TString("_") + frames->GetName(), sideTopSmallLeg_XSize * 0.5,
                     sideTopSmallLeg_YSize * 0.5, sideTopSmallLeg_ZSize * 0.5);
    TGeoShape* sideTopBigLegS =
        new TGeoBBox(TString("sideTopBigLegS") += TString("_") + frames->GetName(), sideTopBigLeg_XSize * 0.5,
                     sideTopBigLeg_YSize * 0.5, sideTopBigLeg_ZSize * 0.5);
 
    TGeoVolume* sideTopSmallLegV =
        new TGeoVolume(TString("sideTopSmallLegV") += TString("_") + frames->GetName(), sideTopSmallLegS);
    TGeoVolume* sideTopBigLegV =
        new TGeoVolume(TString("sideTopBigLegV") += TString("_") + frames->GetName(), sideTopBigLegS);
 
    // volume medium
    TGeoMedium* sideTopLeg_medium = pMedAluminium;
    if (sideTopLeg_medium) {
        sideTopSmallLegV->SetMedium(sideTopLeg_medium);
        sideTopBigLegV->SetMedium(sideTopLeg_medium);
    } else
        Fatal("Main", "Invalid medium for sideTopLegV!");
 
    // volume visual property (transparency)
    sideTopSmallLegV->SetLineColor(TColor::GetColor("#ffcccc"));
    sideTopSmallLegV->SetTransparency(0);
    sideTopBigLegV->SetLineColor(TColor::GetColor("#ffcccc"));
    sideTopBigLegV->SetTransparency(0);
 
    TGeoCombiTrans* sideTopSmallLeg_transf[1];
 
    sideTopSmallLeg_transf[0] = new TGeoCombiTrans();
    sideTopSmallLeg_transf[0]->SetDx(-frontFiberGlassCover_XSize * 0.5 - sideTopSmallLeg_XSize * 0.5 - 2.9 /*shift*/);
    sideTopSmallLeg_transf[0]->SetDy(-frontFiberGlassCover_YSize * 0.5 + sideTopSmallLeg_YSize * 0.5 + 27.23 /*shift*/);
    sideTopSmallLeg_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - sideTopSmallLeg_ZSize * 0.5
                                     - bigSidePlate_ZSize);
 
    TGeoCombiTrans* sideTopBigLeg_transf[1];
 
    sideTopBigLeg_transf[0] = new TGeoCombiTrans();
    sideTopBigLeg_transf[0]->SetDx(-frontFiberGlassCover_XSize * 0.5 + sideTopBigLeg_XSize * 0.5 - sideTopSmallLeg_XSize
                                   - 2.9 /*shift*/);
    sideTopBigLeg_transf[0]->SetDy(-frontFiberGlassCover_YSize * 0.5 + sideTopBigLeg_YSize * 0.5 + 27.23 /*shift*/);
    sideTopBigLeg_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - sideTopBigLeg_ZSize * 0.5
                                   - bigSidePlate_ZSize - sideTopSmallLeg_ZSize);
 
    frames->AddNode(sideTopSmallLegV, 0, sideTopSmallLeg_transf[0]);
    frames->AddNode(sideTopBigLegV, 0, sideTopBigLeg_transf[0]);
    //--------------------------------------------------------------------------
 
    // side stick ---------------------------------------------------------------
    Double_t sideLongStick_XSize = 0.6;     // cm
    Double_t sideLongStick_YSize = 25.72;   // cm
    Double_t sideLongStick_ZSize = 1.2;     // cm
 
    Double_t sideShortStick_XSize = 0.6;   // cm
    Double_t sideShortStick_YSize = 9.6;   // cm
    Double_t sideShortStick_ZSize = 1.2;   // cm
 
    TGeoShape* sideLongStickS =
        new TGeoBBox(TString("sideLongStickS") += TString("_") + frames->GetName(), sideLongStick_XSize * 0.5,
                     sideLongStick_YSize * 0.5, sideLongStick_ZSize * 0.5);
    TGeoShape* sideShortStickS =
        new TGeoBBox(TString("sideShortStickS") += TString("_") + frames->GetName(), sideShortStick_XSize * 0.5,
                     sideShortStick_YSize * 0.5, sideShortStick_ZSize * 0.5);
 
    TGeoVolume* sideLongStickV =
        new TGeoVolume(TString("sideLongStickV") += TString("_") + frames->GetName(), sideLongStickS);
    TGeoVolume* sideShortStickV =
        new TGeoVolume(TString("sideShortStickV") += TString("_") + frames->GetName(), sideShortStickS);
 
    // volume medium
    TGeoMedium* sideStick_medium = pMedAluminium;
    if (sideStick_medium) {
        sideLongStickV->SetMedium(sideStick_medium);
        sideShortStickV->SetMedium(sideStick_medium);
    } else
        Fatal("Main", "Invalid medium for sideTopLegV!");
 
    // volume visual property (transparency)
    sideLongStickV->SetLineColor(TColor::GetColor("#ffcccc"));
    sideLongStickV->SetTransparency(0);
    sideShortStickV->SetLineColor(TColor::GetColor("#ffcccc"));
    sideShortStickV->SetTransparency(0);
 
    TGeoCombiTrans* sideLongStick_transf[1];
 
    sideLongStick_transf[0] = new TGeoCombiTrans();
    sideLongStick_transf[0]->SetDx(-frontFiberGlassCover_XSize * 0.5 - 0.9 /*shift*/);
    sideLongStick_transf[0]->SetDy(-frontFiberGlassCover_YSize * 0.5 + sideLongStick_YSize * 0.5 + 1.51 /*shift*/);
    sideLongStick_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - sideLongStick_ZSize * 0.5
                                   - bigSidePlate_ZSize - sideTopSmallLeg_ZSize - sideTopBigLeg_ZSize + 0.04 /*shift*/);
 
    TGeoCombiTrans* sideShortStick_transf[1];
 
    sideShortStick_transf[0] = new TGeoCombiTrans();
    sideShortStick_transf[0]->SetDx(-frontFiberGlassCover_XSize * 0.5 - 0.9 /*shift*/);
    sideShortStick_transf[0]->SetDy(-frontFiberGlassCover_YSize * 0.5 + sideShortStick_YSize * 0.5 + sideLongStick_YSize
                                    + 2.07 /*shift*/);
    sideShortStick_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - sideShortStick_ZSize * 0.5
                                    - bigSidePlate_ZSize - sideTopSmallLeg_ZSize - sideTopBigLeg_ZSize
                                    + 0.04 /*shift*/);
 
    frames->AddNode(sideLongStickV, 0, sideLongStick_transf[0]);
    frames->AddNode(sideShortStickV, 0, sideShortStick_transf[0]);
    //--------------------------------------------------------------------------
 
    // side funny box -----------------------------------------------------------
    Double_t sideFunnyBox_XSize = 0.8;   // cm
    Double_t sideFunnyBox_YSize = 1.0;   // cm
    Double_t sideFunnyBox_ZSize = 1.5;   // cm
 
    TGeoShape* sideFunnyBoxS =
        new TGeoBBox(TString("sideFunnyBoxS") += TString("_") + frames->GetName(), sideFunnyBox_XSize * 0.5,
                     sideFunnyBox_YSize * 0.5, sideFunnyBox_ZSize * 0.5);
 
    TGeoVolume* sideFunnyBoxV =
        new TGeoVolume(TString("sideFunnyBoxV") += TString("_") + frames->GetName(), sideFunnyBoxS);
 
    // volume medium
    TGeoMedium* sideFunnyBoxV_medium = pMedAluminium;
    if (sideFunnyBoxV_medium) {
        sideFunnyBoxV->SetMedium(sideFunnyBoxV_medium);
    } else
        Fatal("Main", "Invalid medium for sideFunnyBoxV!");
 
    // volume visual property (transparency)
    sideFunnyBoxV->SetLineColor(TColor::GetColor("#ffcccc"));
    sideFunnyBoxV->SetTransparency(0);
 
    TGeoCombiTrans* sideFunnyBox_transf[1];
 
    sideFunnyBox_transf[0] = new TGeoCombiTrans();
    sideFunnyBox_transf[0]->SetDx(-frontFiberGlassCover_XSize * 0.5);
    sideFunnyBox_transf[0]->SetDy(-frontFiberGlassCover_YSize * 0.5 + sideFunnyBox_YSize * 0.5 + sideBottomBigLeg_YSize
                                  + 1.05 /*shift*/);
    sideFunnyBox_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - sideShortStick_ZSize * 0.5
                                  - bigSidePlate_ZSize - sideBottomSmallLeg_ZSize - sideBottomBigLeg_ZSize);
 
    frames->AddNode(sideFunnyBoxV, 0, sideFunnyBox_transf[0]);
    //--------------------------------------------------------------------------
 
    // upper platform -----------------------------------------------------------
    Double_t upperPlatform_XSize = 2.2;   // cm
    Double_t upperPlatform_YSize = 3.7;   // cm
    Double_t upperPlatform_ZSize = 0.2;   // cm
 
    TGeoShape* upperPlatformS =
        new TGeoBBox(TString("upperPlatformS") += TString("_") + frames->GetName(), upperPlatform_XSize * 0.5,
                     upperPlatform_YSize * 0.5, upperPlatform_ZSize * 0.5);
 
    TGeoVolume* upperPlatformV =
        new TGeoVolume(TString("upperPlatformV") += TString("_") + frames->GetName(), upperPlatformS);
 
    // volume medium
    TGeoMedium* upperPlatformV_medium = pMedAluminium;
    if (upperPlatformV_medium) {
        upperPlatformV->SetMedium(upperPlatformV_medium);
    } else
        Fatal("Main", "Invalid medium for upperPlatformV!");
 
    // volume visual property (transparency)
    upperPlatformV->SetLineColor(TColor::GetColor("#ffcccc"));
    upperPlatformV->SetTransparency(0);
 
    TGeoCombiTrans* upperPlatform_transf[1];
 
    upperPlatform_transf[0] = new TGeoCombiTrans();
    upperPlatform_transf[0]->SetDx(-frontFiberGlassCover_XSize * 0.5 - upperPlatform_XSize * 0.5 - 0.8 /*shift*/);
    upperPlatform_transf[0]->SetDy(frontFiberGlassCover_YSize * 0.5 + upperPlatform_YSize * 0.5 + 0.2 /*shift*/);
    upperPlatform_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - upperPlatform_ZSize * 0.5);
 
    frames->AddNode(upperPlatformV, 0, upperPlatform_transf[0]);
    //--------------------------------------------------------------------------
 
    // front left leg -----------------------------------------------------------
    Double_t frontLeftLeg_XSize = 0.53;   // cm
    Double_t frontLeftLeg_YSize = 2.5;    // cm
    Double_t frontLeftLeg_ZSize = 7.4;    // cm
 
    TGeoShape* frontLeftLegS =
        new TGeoBBox(TString("frontLeftLegS") += TString("_") + frames->GetName(), frontLeftLeg_XSize * 0.5,
                     frontLeftLeg_YSize * 0.5, frontLeftLeg_ZSize * 0.5);
 
    TGeoVolume* frontLeftLegV =
        new TGeoVolume(TString("frontLeftLegV") += TString("_") + frames->GetName(), frontLeftLegS);
 
    // volume medium
    TGeoMedium* frontLeftLegV_medium = pMedAluminium;
    if (frontLeftLegV_medium) {
        frontLeftLegV->SetMedium(frontLeftLegV_medium);
    } else
        Fatal("Main", "Invalid medium for frontLeftLegV!");
 
    // volume visual property (transparency)
    frontLeftLegV->SetLineColor(TColor::GetColor("#ffcccc"));
    frontLeftLegV->SetTransparency(0);
 
    TGeoCombiTrans* frontLeftLeg_transf[1];
 
    frontLeftLeg_transf[0] = new TGeoCombiTrans();
    frontLeftLeg_transf[0]->SetDx(-frontFiberGlassCover_XSize * 0.5 - frontLeftLeg_XSize * 0.5 - 1.97 /*shift*/);
    frontLeftLeg_transf[0]->SetDy(frontFiberGlassCover_YSize * 0.5 + frontLeftLeg_YSize * 0.5 + 0.4 /*shift*/);
    frontLeftLeg_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - upperPlatform_ZSize
                                  - frontLeftLeg_ZSize * 0.5);
 
    frames->AddNode(frontLeftLegV, 0, frontLeftLeg_transf[0]);
    //--------------------------------------------------------------------------
 
    // front right leg ----------------------------------------------------------
    Double_t frontRightLeg_XSize = 0.55;   // cm
    Double_t frontRightLeg_YSize = 2.5;    // cm
    Double_t frontRightLeg_ZSize = 6.4;    // cm
 
    TGeoShape* frontRightLegS =
        new TGeoBBox(TString("frontRightLegS") += TString("_") + frames->GetName(), frontRightLeg_XSize * 0.5,
                     frontRightLeg_YSize * 0.5, frontRightLeg_ZSize * 0.5);
 
    TGeoVolume* frontRightLegV =
        new TGeoVolume(TString("frontRightLegV") += TString("_") + frames->GetName(), frontRightLegS);
 
    // volume medium
    TGeoMedium* frontRightLegV_medium = pMedAluminium;
    if (frontRightLegV_medium) {
        frontRightLegV->SetMedium(frontRightLegV_medium);
    } else
        Fatal("Main", "Invalid medium for frontRightLegV!");
 
    // volume visual property (transparency)
    frontRightLegV->SetLineColor(TColor::GetColor("#ffcccc"));
    frontRightLegV->SetTransparency(0);
 
    TGeoCombiTrans* frontRightLeg_transf[1];
 
    frontRightLeg_transf[0] = new TGeoCombiTrans();
    frontRightLeg_transf[0]->SetDx(frontFiberGlassCover_XSize * 0.5 - frontRightLeg_XSize * 0.5 - 1.82 /*shift*/);
    frontRightLeg_transf[0]->SetDy(frontFiberGlassCover_YSize * 0.5 + frontRightLeg_YSize * 0.5 + 0.4 /*shift*/);
    frontRightLeg_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - smallSidePlate_ZSize
                                   - frontRightLeg_ZSize * 0.5);
 
    frames->AddNode(frontRightLegV, 0, frontRightLeg_transf[0]);
    //--------------------------------------------------------------------------
 
    // front center leg ---------------------------------------------------------
    Double_t frontCenterLowLeg_XSize = 1.3;     // cm
    Double_t frontCenterLowLeg_YSize = 0.54;    // cm
    Double_t frontCenterLowLeg_ZSize = 6.875;   // cm
 
    Double_t frontCenterUpLeg_XSize = 0.75;    // cm
    Double_t frontCenterUpLeg_YSize = 1.9;     // cm
    Double_t frontCenterUpLeg_ZSize = 6.875;   // cm
 
    TGeoShape* frontCenterLowLegS =
        new TGeoBBox(TString("frontCenterLowLegS") += TString("_") + frames->GetName(), frontCenterLowLeg_XSize * 0.5,
                     frontCenterLowLeg_YSize * 0.5, frontCenterLowLeg_ZSize * 0.5);
    TGeoShape* frontCenterUpLegS =
        new TGeoBBox(TString("frontCenterUpLegS") += TString("_") + frames->GetName(), frontCenterUpLeg_XSize * 0.5,
                     frontCenterUpLeg_YSize * 0.5, frontCenterUpLeg_ZSize * 0.5);
 
    TGeoVolume* frontCenterLowLegV =
        new TGeoVolume(TString("frontCenterLowLegV") += TString("_") + frames->GetName(), frontCenterLowLegS);
    TGeoVolume* frontCenterUpLegV =
        new TGeoVolume(TString("frontCenterUpLegV") += TString("_") + frames->GetName(), frontCenterUpLegS);
 
    // volume medium
    TGeoMedium* frontCenterLeg_medium = pMedAluminium;
    if (frontCenterLeg_medium) {
        frontCenterLowLegV->SetMedium(frontCenterLeg_medium);
        frontCenterUpLegV->SetMedium(frontCenterLeg_medium);
    } else
        Fatal("Main", "Invalid medium for frontCenterLeg!");
 
    // volume visual property (transparency)
    frontCenterLowLegV->SetLineColor(TColor::GetColor("#ffcccc"));
    frontCenterLowLegV->SetTransparency(0);
    frontCenterUpLegV->SetLineColor(TColor::GetColor("#ffcccc"));
    frontCenterUpLegV->SetTransparency(0);
 
    TGeoCombiTrans* frontCenterLowLeg_transf[1];
 
    frontCenterLowLeg_transf[0] = new TGeoCombiTrans();
    frontCenterLowLeg_transf[0]->SetDx(frontFiberGlassCover_XSize * 0.5 - frontCenterLowLeg_XSize * 0.5
                                       - 35.84 /*shift*/);
    frontCenterLowLeg_transf[0]->SetDy(frontFiberGlassCover_YSize * 0.5 + frontCenterLowLeg_YSize * 0.5
                                       + 0.46 /*shift*/);
    frontCenterLowLeg_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - frontCenterLowLeg_ZSize * 0.5);
 
    TGeoCombiTrans* frontCenterUpLeg_transf[1];
 
    frontCenterUpLeg_transf[0] = new TGeoCombiTrans();
    frontCenterUpLeg_transf[0]->SetDx(frontFiberGlassCover_XSize * 0.5 - frontCenterUpLeg_XSize * 0.5 - 36.1 /*shift*/);
    frontCenterUpLeg_transf[0]->SetDy(frontFiberGlassCover_YSize * 0.5 + frontCenterUpLeg_YSize * 0.5
                                      + frontCenterLowLeg_YSize + 0.46 /*shift*/);
    frontCenterUpLeg_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - frontCenterUpLeg_ZSize * 0.5);
 
    frames->AddNode(frontCenterLowLegV, 0, frontCenterLowLeg_transf[0]);
    frames->AddNode(frontCenterUpLegV, 0, frontCenterUpLeg_transf[0]);
    //--------------------------------------------------------------------------
 
    // upper plank --------------------------------------------------------------
    Double_t upperRightPlank_XSize = 34.49;   // cm
    Double_t upperRightPlank_YSize = 0.6;     // cm
    Double_t upperRightPlank_ZSize = 1.2;     // cm
 
    Double_t upperLeftPlank_XSize = 33.73;   // cm
    Double_t upperLeftPlank_YSize = 0.6;     // cm
    Double_t upperLeftPlank_ZSize = 1.2;     // cm
 
    TGeoShape* upperRightPlankS =
        new TGeoBBox(TString("upperRightPlankS") += TString("_") + frames->GetName(), upperRightPlank_XSize * 0.5,
                     upperRightPlank_YSize * 0.5, upperRightPlank_ZSize * 0.5);
    TGeoShape* upperLeftPlankS =
        new TGeoBBox(TString("upperLeftPlankS") += TString("_") + frames->GetName(), upperLeftPlank_XSize * 0.5,
                     upperLeftPlank_YSize * 0.5, upperLeftPlank_ZSize * 0.5);
 
    TGeoVolume* upperRightPlankV =
        new TGeoVolume(TString("upperRightPlankV") += TString("_") + frames->GetName(), upperRightPlankS);
    TGeoVolume* upperLeftPlankV =
        new TGeoVolume(TString("upperLeftPlankV") += TString("_") + frames->GetName(), upperLeftPlankS);
 
    // volume medium
    TGeoMedium* upperPlank_medium = pMedAluminium;
    if (upperPlank_medium) {
        upperRightPlankV->SetMedium(upperPlank_medium);
        upperLeftPlankV->SetMedium(upperPlank_medium);
    } else
        Fatal("Main", "Invalid medium for upperPlankV!");
 
    // volume visual property (transparency)
    upperRightPlankV->SetLineColor(TColor::GetColor("#ffcccc"));
    upperRightPlankV->SetTransparency(0);
    upperLeftPlankV->SetLineColor(TColor::GetColor("#ffcccc"));
    upperLeftPlankV->SetTransparency(0);
 
    TGeoCombiTrans* upperRightPlank_transf[1];
 
    upperRightPlank_transf[0] = new TGeoCombiTrans();
    upperRightPlank_transf[0]->SetDx(frontFiberGlassCover_XSize * 0.5 - upperRightPlank_XSize * 0.5 - 36.88 /*shift*/);
    upperRightPlank_transf[0]->SetDy(frontFiberGlassCover_YSize * 0.5 + upperRightPlank_YSize * 0.5 + 2.291 /*shift*/);
    upperRightPlank_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - upperRightPlank_ZSize * 0.5
                                     - 5.23 /*shift*/);
 
    TGeoCombiTrans* upperLeftPlank_transf[1];
 
    upperLeftPlank_transf[0] = new TGeoCombiTrans();
    upperLeftPlank_transf[0]->SetDx(frontFiberGlassCover_XSize * 0.5 - upperLeftPlank_XSize * 0.5 - 2.37 /*shift*/);
    upperLeftPlank_transf[0]->SetDy(frontFiberGlassCover_YSize * 0.5 + upperLeftPlank_YSize * 0.5 + 2.291 /*shift*/);
    upperLeftPlank_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - upperLeftPlank_ZSize * 0.5
                                    - 5.23 /*shift*/);
 
    frames->AddNode(upperRightPlankV, 0, upperRightPlank_transf[0]);
    frames->AddNode(upperLeftPlankV, 0, upperLeftPlank_transf[0]);
    //--------------------------------------------------------------------------
 
    // side channel bar ---------------------------------------------------------
    Double_t sideChannelBar_XSize = 1.5;    // cm
    Double_t sideChannelBar_YSize = 40.0;   // cm
    Double_t sideChannelBar_ZSize = 0.38;   // cm
 
    TGeoShape* sideChannelBarS =
        new TGeoBBox(TString("sideChannelBarS") += TString("_") + frames->GetName(), sideChannelBar_XSize * 0.5,
                     sideChannelBar_YSize * 0.5, sideChannelBar_ZSize * 0.5);
 
    TGeoVolume* sideChannelBarV =
        new TGeoVolume(TString("sideChannelBarV") += TString("_") + frames->GetName(), sideChannelBarS);
 
    // volume medium
    TGeoMedium* sideChannelBarV_medium = pMedAluminium;
    if (sideChannelBarV_medium) {
        sideChannelBarV->SetMedium(sideChannelBarV_medium);
    } else
        Fatal("Main", "Invalid medium for sideChannelBarV!");
 
    // volume visual property (transparency)
    sideChannelBarV->SetLineColor(TColor::GetColor("#ffcccc"));
    sideChannelBarV->SetTransparency(0);
 
    TGeoCombiTrans* sideChannelBar_transf[1];
 
    sideChannelBar_transf[0] = new TGeoCombiTrans();
    sideChannelBar_transf[0]->SetDx(-frontFiberGlassCover_XSize * 0.5 - sideChannelBar_XSize * 0.5 + 2.0 /*shift*/);
    sideChannelBar_transf[0]->SetDy(-frontFiberGlassCover_YSize * 0.5 + sideChannelBar_YSize * 0.5 + 1.05 /*shift*/);
    sideChannelBar_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - sideChannelBar_ZSize * 0.5
                                    - 2.14 /*shift*/);
 
    frames->AddNode(sideChannelBarV, 0, sideChannelBar_transf[0]);
    //--------------------------------------------------------------------------
 
    // front funny channel bar --------------------------------------------------
    Double_t frontFunnyChannelBar_XSize = 2.82;   // cm
    Double_t frontFunnyChannelBar_YSize = 2.5;    // cm
    Double_t frontFunnyChannelBar_ZSize = 0.47;   // cm
 
    TGeoShape* frontFunnyChannelBarS = new TGeoBBox(
        TString("frontFunnyChannelBarS") += TString("_") + frames->GetName(), frontFunnyChannelBar_XSize * 0.5,
        frontFunnyChannelBar_YSize * 0.5, frontFunnyChannelBar_ZSize * 0.5);
 
    TGeoVolume* frontFunnyChannelBarV =
        new TGeoVolume(TString("frontFunnyChannelBarV") += TString("_") + frames->GetName(), frontFunnyChannelBarS);
 
    // volume medium
    TGeoMedium* frontFunnyChannelBarV_medium = pMedAluminium;
    if (frontFunnyChannelBarV_medium) {
        frontFunnyChannelBarV->SetMedium(frontFunnyChannelBarV_medium);
    } else
        Fatal("Main", "Invalid medium for frontFunnyChannelBarV!");
 
    // volume visual property (transparency)
    frontFunnyChannelBarV->SetLineColor(TColor::GetColor("#ffcccc"));
    frontFunnyChannelBarV->SetTransparency(0);
 
    TGeoCombiTrans* frontFunnyChannelBar_transf[1];
 
    frontFunnyChannelBar_transf[0] = new TGeoCombiTrans();
    frontFunnyChannelBar_transf[0]->SetDx(-frontFiberGlassCover_XSize * 0.5 - frontFunnyChannelBar_XSize * 0.5
                                          - 2.5 /*shift*/);
    frontFunnyChannelBar_transf[0]->SetDy(-frontFiberGlassCover_YSize * 0.5 + frontFunnyChannelBar_YSize * 0.5
                                          + 43.1 /*shift*/);
    frontFunnyChannelBar_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - frontFunnyChannelBar_ZSize * 0.5
                                          - 2.1 /*shift*/);
 
    frames->AddNode(frontFunnyChannelBarV, 0, frontFunnyChannelBar_transf[0]);
    //--------------------------------------------------------------------------
 
    // front channel bar --------------------------------------------------------
    Double_t frontRightChannelBar_XSize = 34.23;   // cm
    Double_t frontRightChannelBar_YSize = 2.5;     // cm
    Double_t frontRightChannelBar_ZSize = 0.47;    // cm
 
    Double_t frontLeftChannelBar_XSize = 33.47;   // cm
    Double_t frontLeftChannelBar_YSize = 2.5;     // cm
    Double_t frontLeftChannelBar_ZSize = 0.47;    // cm
 
    TGeoShape* frontRightChannelBarS = new TGeoBBox(
        TString("frontRightChannelBarS") += TString("_") + frames->GetName(), frontRightChannelBar_XSize * 0.5,
        frontRightChannelBar_YSize * 0.5, frontRightChannelBar_ZSize * 0.5);
    TGeoShape* frontLeftChannelBarS =
        new TGeoBBox(TString("frontLeftChannelBarS") += TString("_") + frames->GetName(),
                     frontLeftChannelBar_XSize * 0.5, frontLeftChannelBar_YSize * 0.5, frontLeftChannelBar_ZSize * 0.5);
 
    TGeoVolume* frontRightChannelBarV =
        new TGeoVolume(TString("frontRightChannelBarV") += TString("_") + frames->GetName(), frontRightChannelBarS);
    TGeoVolume* frontLeftChannelBarV =
        new TGeoVolume(TString("frontLeftChannelBarV") += TString("_") + frames->GetName(), frontLeftChannelBarS);
 
    // volume medium
    TGeoMedium* frontChannel_medium = pMedAluminium;
    if (frontChannel_medium) {
        frontRightChannelBarV->SetMedium(frontChannel_medium);
        frontLeftChannelBarV->SetMedium(frontChannel_medium);
    } else
        Fatal("Main", "Invalid medium for frontChannelBarV!");
 
    // volume visual property (transparency)
    frontRightChannelBarV->SetLineColor(TColor::GetColor("#ffcccc"));
    frontRightChannelBarV->SetTransparency(0);
    frontLeftChannelBarV->SetLineColor(TColor::GetColor("#ffcccc"));
    frontLeftChannelBarV->SetTransparency(0);
 
    TGeoCombiTrans* frontRightChannelBar_transf[1];
 
    frontRightChannelBar_transf[0] = new TGeoCombiTrans();
    frontRightChannelBar_transf[0]->SetDx(frontFiberGlassCover_XSize * 0.5 - frontRightChannelBar_XSize * 0.5
                                          - 37.14 /*shift*/);
    frontRightChannelBar_transf[0]->SetDy(-frontFiberGlassCover_YSize * 0.5 + frontRightChannelBar_YSize * 0.5
                                          + 43.1 /*shift*/);
    frontRightChannelBar_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - frontRightChannelBar_ZSize * 0.5
                                          - 2.1 /*shift*/);
 
    TGeoCombiTrans* frontLeftChannelBar_transf[1];
 
    frontLeftChannelBar_transf[0] = new TGeoCombiTrans();
    frontLeftChannelBar_transf[0]->SetDx(frontFiberGlassCover_XSize * 0.5 - frontLeftChannelBar_XSize * 0.5
                                         - 2.37 /*shift*/);
    frontLeftChannelBar_transf[0]->SetDy(-frontFiberGlassCover_YSize * 0.5 + frontLeftChannelBar_YSize * 0.5
                                         + 43.1 /*shift*/);
    frontLeftChannelBar_transf[0]->SetDz(centerFiberGlassFrameSidePart_ZSize * 0.5 - frontLeftChannelBar_ZSize * 0.5
                                         - 2.1 /*shift*/);
 
    frames->AddNode(frontRightChannelBarV, 0, frontRightChannelBar_transf[0]);
    frames->AddNode(frontLeftChannelBarV, 0, frontLeftChannelBar_transf[0]);
    //--------------------------------------------------------------------------
 
    return frames;
}
//------------------------------------------------------------------------------
 
TGeoVolume* CreateModule_Station163x45(TString module_name,
                                       Double_t xsize,
                                       Double_t ysize,
                                       Double_t zsize,
                                       Double_t hole_radius)
{
 
    // module shapes
    TGeoShape* module_partS = new TGeoBBox("module_partS", xsize * 0.5, ysize * 0.5, zsize * 0.5);
    TGeoShape* holeS = new TGeoTube("holeS", 0.0, hole_radius, zsize * 0.5 + 0.01);
 
    gRandom->SetSeed(0);
    Int_t uniqueId = gRandom->Integer(10000);
    TGeoTranslation* hole_module_trans = new TGeoTranslation(
        TString("hole_module_trans_") + TString::Itoa(uniqueId, 10), -xsize * 0.5, -ysize * 0.5, 0.0);
 
    hole_module_trans->RegisterYourself();
 
    TString bool_expression_module = TString(module_partS->GetName()) + TString(" - ") + TString(holeS->GetName())
                                     + TString(":") + TString(hole_module_trans->GetName());
    TGeoCompositeShape* moduleS = new TGeoCompositeShape(bool_expression_module);
 
    // module volume
    TGeoVolume* moduleV = new TGeoVolume(module_name, moduleS);
 
    // medium
    if (pMedArCO27030)
        moduleV->SetMedium(pMedArCO27030);
    else
        Fatal("Main", "Invalid medium for sensitive modules!");
 
    // visual parameters
    moduleV->SetLineColor(TColor::GetColor("#ff47ca"));
    moduleV->SetTransparency(20);
 
    return moduleV;
}
 
TGeoVolume* CreateLayersForModule_Station163x45(TString layer_name)
{
 
    // frame volumes
    TGeoVolume* layers = new TGeoVolumeAssembly(layer_name);
    layers->SetMedium(pMedAir);
 
    // Common parameters for all layers
    Double_t layer_XSize = XModuleSize_Station163x45;   // cm
    Double_t layer_YSize = YModuleSize_Station163x45;   // cm
 
    Double_t layerFront_XSize = 80.85;     // cm
    Double_t layerFront_YSize = 44.2;      // cm
    Double_t layerFront_XShift = -0.375;   // cm
    Double_t layerFront_YShift = -0.2;     // cm
 
    Double_t layerBack_XSize = 80.71;     // cm
    Double_t layerBack_YSize = 44.2;      // cm
    Double_t layerBack_XShift = -0.445;   // cm
    Double_t layerBack_YShift = -0.2;     // cm
 
    // copper layer -------------------------------------------------------------
    Double_t copperLayer_ZSize = 0.00655;    // cm;
    Double_t copperLayerHole_Radius = 6.0;   // cm
 
    // layer shape
    TGeoShape* copperLayerFrontBlankS =
        new TGeoBBox(TString("copperLayerFrontBlankS") += TString("_") + layers->GetName(), layerFront_XSize * 0.5,
                     layerFront_YSize * 0.5, copperLayer_ZSize * 0.5);
    TGeoShape* copperLayerBackBlankS =
        new TGeoBBox(TString("copperLayerBackBlankS") += TString("_") + layers->GetName(), layerBack_XSize * 0.5,
                     layerBack_YSize * 0.5, copperLayer_ZSize * 0.5);
 
    TGeoShape* copperLayerFrontHoleS =
        new TGeoTube(TString("copperLayerFrontHoleS") += TString("_") + layers->GetName(), 0.0, copperLayerHole_Radius,
                     copperLayer_ZSize * 0.5 + 0.01);
    TGeoShape* copperLayerBackHoleS = new TGeoTube(TString("copperLayerBackHoleS") += TString("_") + layers->GetName(),
                                                   0.0, copperLayerHole_Radius, copperLayer_ZSize * 0.5 + 0.01);
 
    TGeoTranslation* copperLayerFrontHole_pos = new TGeoTranslation();
    copperLayerFrontHole_pos->SetName("copperLayerFrontHole_pos");
    copperLayerFrontHole_pos->SetDx(-XModuleSize_Station163x45 * 0.5 - layerFront_XShift);
    copperLayerFrontHole_pos->SetDy(-YModuleSize_Station163x45 * 0.5 - layerFront_YShift);
    copperLayerFrontHole_pos->SetDz(0.0);
    copperLayerFrontHole_pos->RegisterYourself();
 
    TGeoTranslation* copperLayerBackHole_pos = new TGeoTranslation();
    copperLayerBackHole_pos->SetName("copperLayerBackHole_pos");
    copperLayerBackHole_pos->SetDx(-XModuleSize_Station163x45 * 0.5 - layerBack_XShift);
    copperLayerBackHole_pos->SetDy(-YModuleSize_Station163x45 * 0.5 - layerBack_YShift);
    copperLayerBackHole_pos->SetDz(0.0);
    copperLayerBackHole_pos->RegisterYourself();
 
    TGeoCompositeShape* copperLayerFrontS = new TGeoCompositeShape();
    copperLayerFrontS->SetName(TString("copperLayerFrontS") += TString("_") + layers->GetName());
    {
        TString expression = "copperLayerFrontBlankS";
        expression += TString("_") + layers->GetName();
        expression += "-copperLayerFrontHoleS";
        expression += TString("_") + layers->GetName();
        expression += ":copperLayerFrontHole_pos";
 
        copperLayerFrontS->MakeNode(expression);
        copperLayerFrontS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoCompositeShape* copperLayerBackS = new TGeoCompositeShape();
    copperLayerBackS->SetName(TString("copperLayerBackS") += TString("_") + layers->GetName());
    {
        TString expression = "copperLayerBackBlankS";
        expression += TString("_") + layers->GetName();
        expression += "-copperLayerBackHoleS";
        expression += TString("_") + layers->GetName();
        expression += ":copperLayerBackHole_pos";
 
        copperLayerBackS->MakeNode(expression);
        copperLayerBackS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* copperLayerFrontV =
        new TGeoVolume(TString("copperLayerFrontV") += TString("_") + layers->GetName(), copperLayerFrontS);
    TGeoVolume* copperLayerBackV =
        new TGeoVolume(TString("copperLayerBackV") += TString("_") + layers->GetName(), copperLayerBackS);
 
    // volume medium
    TGeoMedium* copperLayerV_medium = pMedCopper;
    if (copperLayerV_medium) {
        copperLayerFrontV->SetMedium(copperLayerV_medium);
        copperLayerBackV->SetMedium(copperLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for copperLayerV!");
 
    // volume visual property (transparency)
    copperLayerFrontV->SetLineColor(TColor::GetColor("#ff7538"));
    copperLayerFrontV->SetTransparency(0);
    copperLayerBackV->SetLineColor(TColor::GetColor("#ff7538"));
    copperLayerBackV->SetTransparency(0);
 
    TGeoCombiTrans* copperLayerFront_transf[2];
 
    copperLayerFront_transf[0] = new TGeoCombiTrans();
    copperLayerFront_transf[0]->SetDx(+layerFront_XShift);
    copperLayerFront_transf[0]->SetDy(+layerFront_YShift);
    copperLayerFront_transf[0]->SetDz(-ZGEMSize_Station163x45 * 0.5 + copperLayer_ZSize * 0.5);
 
    TGeoCombiTrans* copperLayerBack_transf[1];
 
    copperLayerBack_transf[0] = new TGeoCombiTrans();
    copperLayerBack_transf[0]->SetDx(+layerBack_XShift);
    copperLayerBack_transf[0]->SetDy(+layerBack_YShift);
    copperLayerBack_transf[0]->SetDz(+ZGEMSize_Station163x45 * 0.5 - copperLayer_ZSize * 0.5);
 
    layers->AddNode(copperLayerFrontV, 0, copperLayerFront_transf[0]);
    layers->AddNode(copperLayerBackV, 0, copperLayerBack_transf[0]);
    //--------------------------------------------------------------------------
 
    // glue layer ---------------------------------------------------------------
    Double_t glueLayer_ZSize = 0.01;       // cm; half-thickness of all glue layers
    Double_t glueLayerHole_Radius = 6.0;   // cm
 
    // layer shape
    TGeoShape* glueLayerFrontBlankS =
        new TGeoBBox(TString("glueLayerFrontBlankS") += TString("_") + layers->GetName(), layerFront_XSize * 0.5,
                     layerFront_YSize * 0.5, glueLayer_ZSize * 0.5);
    TGeoShape* glueLayerBackBlankS = new TGeoBBox(TString("glueLayerBackBlankS") += TString("_") + layers->GetName(),
                                                  layerBack_XSize * 0.5, layerBack_YSize * 0.5, glueLayer_ZSize * 0.5);
 
    TGeoShape* glueLayerFrontHoleS = new TGeoTube(TString("glueLayerFrontHoleS") += TString("_") + layers->GetName(),
                                                  0.0, glueLayerHole_Radius, glueLayer_ZSize * 0.5 + 0.01);
    TGeoShape* glueLayerBackHoleS = new TGeoTube(TString("glueLayerBackHoleS") += TString("_") + layers->GetName(), 0.0,
                                                 glueLayerHole_Radius, glueLayer_ZSize * 0.5 + 0.01);
 
    TGeoTranslation* glueLayerFrontHole_pos = new TGeoTranslation();
    glueLayerFrontHole_pos->SetName("glueLayerFrontHole_pos");
    glueLayerFrontHole_pos->SetDx(-XModuleSize_Station163x45 * 0.5 - layerFront_XShift);
    glueLayerFrontHole_pos->SetDy(-YModuleSize_Station163x45 * 0.5 - layerFront_YShift);
    glueLayerFrontHole_pos->SetDz(0.0);
    glueLayerFrontHole_pos->RegisterYourself();
 
    TGeoTranslation* glueLayerBackHole_pos = new TGeoTranslation();
    glueLayerBackHole_pos->SetName("glueLayerBackHole_pos");
    glueLayerBackHole_pos->SetDx(-XModuleSize_Station163x45 * 0.5 - layerBack_XShift);
    glueLayerBackHole_pos->SetDy(-YModuleSize_Station163x45 * 0.5 - layerBack_YShift);
    glueLayerBackHole_pos->SetDz(0.0);
    glueLayerBackHole_pos->RegisterYourself();
 
    TGeoCompositeShape* glueLayerFrontS = new TGeoCompositeShape();
    glueLayerFrontS->SetName(TString("glueLayerFrontS") += TString("_") + layers->GetName());
    {
        TString expression = "glueLayerFrontBlankS";
        expression += TString("_") + layers->GetName();
        expression += "-glueLayerFrontHoleS";
        expression += TString("_") + layers->GetName();
        expression += ":glueLayerFrontHole_pos";
 
        glueLayerFrontS->MakeNode(expression);
        glueLayerFrontS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoCompositeShape* glueLayerBackS = new TGeoCompositeShape();
    glueLayerBackS->SetName(TString("glueLayerBackS") += TString("_") + layers->GetName());
    {
        TString expression = "glueLayerBackBlankS";
        expression += TString("_") + layers->GetName();
        expression += "-glueLayerBackHoleS";
        expression += TString("_") + layers->GetName();
        expression += ":glueLayerBackHole_pos";
 
        glueLayerBackS->MakeNode(expression);
        glueLayerBackS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* glueLayerFrontV =
        new TGeoVolume(TString("glueLayerFrontV") += TString("_") + layers->GetName(), glueLayerFrontS);
    TGeoVolume* glueLayerBackV =
        new TGeoVolume(TString("glueLayerBackV") += TString("_") + layers->GetName(), glueLayerBackS);
 
    // volume medium
    TGeoMedium* glueLayerV_medium = pMedGlue;
    if (glueLayerV_medium) {
        glueLayerFrontV->SetMedium(glueLayerV_medium);
        glueLayerBackV->SetMedium(glueLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for glueLayerV!");
 
    // volume visual property (transparency)
    glueLayerFrontV->SetLineColor(TColor::GetColor("#1919ff"));
    glueLayerFrontV->SetTransparency(0);
    glueLayerBackV->SetLineColor(TColor::GetColor("#1919ff"));
    glueLayerBackV->SetTransparency(0);
 
    TGeoCombiTrans* glueLayerFront_transf[1];
 
    glueLayerFront_transf[0] = new TGeoCombiTrans();
    glueLayerFront_transf[0]->SetDx(+layerFront_XShift);
    glueLayerFront_transf[0]->SetDy(+layerFront_YShift);
    glueLayerFront_transf[0]->SetDz(-ZGEMSize_Station163x45 * 0.5 + copperLayer_ZSize + glueLayer_ZSize * 0.5);
 
    TGeoCombiTrans* glueLayerBack_transf[1];
 
    glueLayerBack_transf[0] = new TGeoCombiTrans();
    glueLayerBack_transf[0]->SetDx(+layerBack_XShift);
    glueLayerBack_transf[0]->SetDy(+layerBack_YShift);
    glueLayerBack_transf[0]->SetDz(+ZGEMSize_Station163x45 * 0.5 - copperLayer_ZSize * 0.5 - glueLayer_ZSize * 0.5);
 
    layers->AddNode(glueLayerFrontV, 0, glueLayerFront_transf[0]);
    layers->AddNode(glueLayerBackV, 0, glueLayerBack_transf[0]);
    //--------------------------------------------------------------------------
 
    // epoxide layer ------------------------------------------------------------
    Double_t epoxideLayer_ZSize = 0.105;      // cm; half-thickness of all epoxide layers
    Double_t epoxideLayerHole_Radius = 6.0;   // cm
 
    // layer shape
    TGeoShape* epoxideLayerFrontBlankS =
        new TGeoBBox(TString("epoxideLayerFrontBlankS") += TString("_") + layers->GetName(), layerFront_XSize * 0.5,
                     layerFront_YSize * 0.5, epoxideLayer_ZSize * 0.5);
    TGeoShape* epoxideLayerBackBlankS =
        new TGeoBBox(TString("epoxideLayerBackBlankS") += TString("_") + layers->GetName(), layerBack_XSize * 0.5,
                     layerBack_YSize * 0.5, epoxideLayer_ZSize * 0.5);
 
    TGeoShape* epoxideLayerFrontHoleS =
        new TGeoTube(TString("epoxideLayerFrontHoleS") += TString("_") + layers->GetName(), 0.0,
                     epoxideLayerHole_Radius, epoxideLayer_ZSize * 0.5 + 0.01);
    TGeoShape* epoxideLayerBackHoleS =
        new TGeoTube(TString("epoxideLayerBackHoleS") += TString("_") + layers->GetName(), 0.0, epoxideLayerHole_Radius,
                     epoxideLayer_ZSize * 0.5 + 0.01);
 
    TGeoTranslation* epoxideLayerFrontHole_pos = new TGeoTranslation();
    epoxideLayerFrontHole_pos->SetName("epoxideLayerFrontHole_pos");
    epoxideLayerFrontHole_pos->SetDx(-XModuleSize_Station163x45 * 0.5 - layerFront_XShift);
    epoxideLayerFrontHole_pos->SetDy(-YModuleSize_Station163x45 * 0.5 - layerFront_YShift);
    epoxideLayerFrontHole_pos->SetDz(0.0);
    epoxideLayerFrontHole_pos->RegisterYourself();
 
    TGeoTranslation* epoxideLayerBackHole_pos = new TGeoTranslation();
    epoxideLayerBackHole_pos->SetName("epoxideLayerBackHole_pos");
    epoxideLayerBackHole_pos->SetDx(-XModuleSize_Station163x45 * 0.5 - layerBack_XShift);
    epoxideLayerBackHole_pos->SetDy(-YModuleSize_Station163x45 * 0.5 - layerBack_YShift);
    epoxideLayerBackHole_pos->SetDz(0.0);
    epoxideLayerBackHole_pos->RegisterYourself();
 
    TGeoCompositeShape* epoxideLayerFrontS = new TGeoCompositeShape();
    epoxideLayerFrontS->SetName(TString("epoxideLayerFrontS") += TString("_") + layers->GetName());
    {
        TString expression = "epoxideLayerFrontBlankS";
        expression += TString("_") + layers->GetName();
        expression += "-epoxideLayerFrontHoleS";
        expression += TString("_") + layers->GetName();
        expression += ":epoxideLayerFrontHole_pos";
 
        epoxideLayerFrontS->MakeNode(expression);
        epoxideLayerFrontS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoCompositeShape* epoxideLayerBackS = new TGeoCompositeShape();
    epoxideLayerBackS->SetName(TString("epoxideLayerBackS") += TString("_") + layers->GetName());
    {
        TString expression = "epoxideLayerBackBlankS";
        expression += TString("_") + layers->GetName();
        expression += "-epoxideLayerBackHoleS";
        expression += TString("_") + layers->GetName();
        expression += ":epoxideLayerBackHole_pos";
 
        epoxideLayerBackS->MakeNode(expression);
        epoxideLayerBackS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* epoxideLayerFrontV =
        new TGeoVolume(TString("epoxideLayerFrontV") += TString("_") + layers->GetName(), epoxideLayerFrontS);
    TGeoVolume* epoxideLayerBackV =
        new TGeoVolume(TString("epoxideLayerBackV") += TString("_") + layers->GetName(), epoxideLayerBackS);
 
    // volume medium
    TGeoMedium* epoxideLayerV_medium = pMedEpoxideCompound;
    if (epoxideLayerV_medium) {
        epoxideLayerFrontV->SetMedium(epoxideLayerV_medium);
        epoxideLayerBackV->SetMedium(epoxideLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for epoxideLayerV!");
 
    // volume visual property (transparency)
    epoxideLayerFrontV->SetLineColor(TColor::GetColor("#aa33ff"));
    epoxideLayerFrontV->SetTransparency(0);
    epoxideLayerBackV->SetLineColor(TColor::GetColor("#aa33ff"));
    epoxideLayerBackV->SetTransparency(0);
 
    TGeoCombiTrans* epoxideLayerFront_transf[1];
 
    epoxideLayerFront_transf[0] = new TGeoCombiTrans();
    epoxideLayerFront_transf[0]->SetDx(+layerFront_XShift);
    epoxideLayerFront_transf[0]->SetDy(+layerFront_YShift);
    epoxideLayerFront_transf[0]->SetDz(-ZGEMSize_Station163x45 * 0.5 + copperLayer_ZSize + glueLayer_ZSize
                                       + epoxideLayer_ZSize * 0.5);
 
    TGeoCombiTrans* epoxideLayerBack_transf[1];
 
    epoxideLayerBack_transf[0] = new TGeoCombiTrans();
    epoxideLayerBack_transf[0]->SetDx(+layerBack_XShift);
    epoxideLayerBack_transf[0]->SetDy(+layerBack_YShift);
    epoxideLayerBack_transf[0]->SetDz(+ZGEMSize_Station163x45 * 0.5 - copperLayer_ZSize * 0.5 - glueLayer_ZSize
                                      - epoxideLayer_ZSize * 0.5);
 
    layers->AddNode(epoxideLayerFrontV, 0, epoxideLayerFront_transf[0]);
    layers->AddNode(epoxideLayerBackV, 0, epoxideLayerBack_transf[0]);
    //--------------------------------------------------------------------------
 
    // honeycomb layer ----------------------------------------------------------
    Double_t honeycombLayer_ZSize = 1.5 - (0.06805);   // cm; half-thickness of all honeycomb layers
    Double_t honeycombLayerHole_Radius = 6.0;          // cm
 
    // layer shape
    TGeoShape* honeycombLayerFrontBlankS =
        new TGeoBBox(TString("honeycombLayerFrontBlankS") += TString("_") + layers->GetName(), layerFront_XSize * 0.5,
                     layerFront_YSize * 0.5, honeycombLayer_ZSize * 0.5);
    TGeoShape* honeycombLayerBackBlankS =
        new TGeoBBox(TString("honeycombLayerBackBlankS") += TString("_") + layers->GetName(), layerBack_XSize * 0.5,
                     layerBack_YSize * 0.5, honeycombLayer_ZSize * 0.5);
 
    TGeoShape* honeycombLayerFrontHoleS =
        new TGeoTube(TString("honeycombLayerFrontHoleS") += TString("_") + layers->GetName(), 0.0,
                     honeycombLayerHole_Radius, honeycombLayer_ZSize * 0.5 + 0.01);
    TGeoShape* honeycombLayerBackHoleS =
        new TGeoTube(TString("honeycombLayerBackHoleS") += TString("_") + layers->GetName(), 0.0,
                     honeycombLayerHole_Radius, honeycombLayer_ZSize * 0.5 + 0.01);
 
    TGeoTranslation* honeycombLayerFrontHole_pos = new TGeoTranslation();
    honeycombLayerFrontHole_pos->SetName("honeycombLayerFrontHole_pos");
    honeycombLayerFrontHole_pos->SetDx(-XModuleSize_Station163x45 * 0.5 - layerFront_XShift);
    honeycombLayerFrontHole_pos->SetDy(-YModuleSize_Station163x45 * 0.5 - layerFront_YShift);
    honeycombLayerFrontHole_pos->SetDz(0.0);
    honeycombLayerFrontHole_pos->RegisterYourself();
 
    TGeoTranslation* honeycombLayerBackHole_pos = new TGeoTranslation();
    honeycombLayerBackHole_pos->SetName("honeycombLayerBackHole_pos");
    honeycombLayerBackHole_pos->SetDx(-XModuleSize_Station163x45 * 0.5 - layerBack_XShift);
    honeycombLayerBackHole_pos->SetDy(-YModuleSize_Station163x45 * 0.5 - layerBack_YShift);
    honeycombLayerBackHole_pos->SetDz(0.0);
    honeycombLayerBackHole_pos->RegisterYourself();
 
    TGeoCompositeShape* honeycombLayerFrontS = new TGeoCompositeShape();
    honeycombLayerFrontS->SetName(TString("honeycombLayerFrontS") += TString("_") + layers->GetName());
    {
        TString expression = "honeycombLayerFrontBlankS";
        expression += TString("_") + layers->GetName();
        expression += "-honeycombLayerFrontHoleS";
        expression += TString("_") + layers->GetName();
        expression += ":honeycombLayerFrontHole_pos";
 
        honeycombLayerFrontS->MakeNode(expression);
        honeycombLayerFrontS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoCompositeShape* honeycombLayerBackS = new TGeoCompositeShape();
    honeycombLayerBackS->SetName(TString("honeycombLayerBackS") += TString("_") + layers->GetName());
    {
        TString expression = "honeycombLayerBackBlankS";
        expression += TString("_") + layers->GetName();
        expression += "-honeycombLayerBackHoleS";
        expression += TString("_") + layers->GetName();
        expression += ":honeycombLayerBackHole_pos";
 
        honeycombLayerBackS->MakeNode(expression);
        honeycombLayerBackS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* honeycombLayerFrontV =
        new TGeoVolume(TString("honeycombLayerFrontV") += TString("_") + layers->GetName(), honeycombLayerFrontS);
    TGeoVolume* honeycombLayerBackV =
        new TGeoVolume(TString("honeycombLayerBackV") += TString("_") + layers->GetName(), honeycombLayerBackS);
 
    // volume medium
    TGeoMedium* honeycombLayerV_medium = pMedHoneyComb;
    if (honeycombLayerV_medium) {
        honeycombLayerFrontV->SetMedium(honeycombLayerV_medium);
        honeycombLayerBackV->SetMedium(honeycombLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for honeycombLayerV!");
 
    // volume visual property (transparency)
    honeycombLayerFrontV->SetLineColor(TColor::GetColor("#ffdf84"));
    honeycombLayerFrontV->SetTransparency(0);
    honeycombLayerBackV->SetLineColor(TColor::GetColor("#ffdf84"));
    honeycombLayerBackV->SetTransparency(0);
 
    TGeoCombiTrans* honeycombLayerFront_transf[1];
 
    honeycombLayerFront_transf[0] = new TGeoCombiTrans();
    honeycombLayerFront_transf[0]->SetDx(+layerFront_XShift);
    honeycombLayerFront_transf[0]->SetDy(+layerFront_YShift);
    honeycombLayerFront_transf[0]->SetDz(-ZGEMSize_Station163x45 * 0.5 + copperLayer_ZSize + glueLayer_ZSize
                                         + epoxideLayer_ZSize + honeycombLayer_ZSize * 0.5);
 
    TGeoCombiTrans* honeycombLayerBack_transf[1];
 
    honeycombLayerBack_transf[0] = new TGeoCombiTrans();
    honeycombLayerBack_transf[0]->SetDx(+layerBack_XShift);
    honeycombLayerBack_transf[0]->SetDy(+layerBack_YShift);
    honeycombLayerBack_transf[0]->SetDz(+ZGEMSize_Station163x45 * 0.5 - copperLayer_ZSize * 0.5 - glueLayer_ZSize
                                        - epoxideLayer_ZSize - honeycombLayer_ZSize * 0.5);
 
    layers->AddNode(honeycombLayerFrontV, 0, honeycombLayerFront_transf[0]);
    layers->AddNode(honeycombLayerBackV, 0, honeycombLayerBack_transf[0]);
    //--------------------------------------------------------------------------
 
    // polyamide layer ----------------------------------------------------------
    Double_t polyamideLayer_ZSize = 0.0125;     // cm; half-thickness of all polyamide layers
    Double_t polyamideLayerHole_Radius = 6.0;   // cm
 
    // layer shape
    TGeoShape* polyamideLayerFrontBlankS =
        new TGeoBBox(TString("polyamideLayerFrontBlankS") += TString("_") + layers->GetName(), layerFront_XSize * 0.5,
                     layerFront_YSize * 0.5, polyamideLayer_ZSize * 0.5);
    TGeoShape* polyamideLayerBackBlankS =
        new TGeoBBox(TString("polyamideLayerBackBlankS") += TString("_") + layers->GetName(), layerBack_XSize * 0.5,
                     layerBack_YSize * 0.5, polyamideLayer_ZSize * 0.5);
 
    TGeoShape* polyamideLayerFrontHoleS =
        new TGeoTube(TString("polyamideLayerFrontHoleS") += TString("_") + layers->GetName(), 0.0,
                     polyamideLayerHole_Radius, polyamideLayer_ZSize * 0.5 + 0.01);
    TGeoShape* polyamideLayerBackHoleS =
        new TGeoTube(TString("polyamideLayerBackHoleS") += TString("_") + layers->GetName(), 0.0,
                     polyamideLayerHole_Radius, polyamideLayer_ZSize * 0.5 + 0.01);
 
    TGeoTranslation* polyamideLayerFrontHole_pos = new TGeoTranslation();
    polyamideLayerFrontHole_pos->SetName("polyamideLayerFrontHole_pos");
    polyamideLayerFrontHole_pos->SetDx(-XModuleSize_Station163x45 * 0.5 - layerFront_XShift);
    polyamideLayerFrontHole_pos->SetDy(-YModuleSize_Station163x45 * 0.5 - layerFront_YShift);
    polyamideLayerFrontHole_pos->SetDz(0.0);
    polyamideLayerFrontHole_pos->RegisterYourself();
 
    TGeoTranslation* polyamideLayerBackHole_pos = new TGeoTranslation();
    polyamideLayerBackHole_pos->SetName("polyamideLayerBackHole_pos");
    polyamideLayerBackHole_pos->SetDx(-XModuleSize_Station163x45 * 0.5 - layerBack_XShift);
    polyamideLayerBackHole_pos->SetDy(-YModuleSize_Station163x45 * 0.5 - layerBack_YShift);
    polyamideLayerBackHole_pos->SetDz(0.0);
    polyamideLayerBackHole_pos->RegisterYourself();
 
    TGeoCompositeShape* polyamideLayerFrontS = new TGeoCompositeShape();
    polyamideLayerFrontS->SetName(TString("polyamideLayerFrontS") += TString("_") + layers->GetName());
    {
        TString expression = "polyamideLayerFrontBlankS";
        expression += TString("_") + layers->GetName();
        expression += "-polyamideLayerFrontHoleS";
        expression += TString("_") + layers->GetName();
        expression += ":polyamideLayerFrontHole_pos";
 
        polyamideLayerFrontS->MakeNode(expression);
        polyamideLayerFrontS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoCompositeShape* polyamideLayerBackS = new TGeoCompositeShape();
    polyamideLayerBackS->SetName(TString("polyamideLayerBackS") += TString("_") + layers->GetName());
    {
        TString expression = "polyamideLayerBackBlankS";
        expression += TString("_") + layers->GetName();
        expression += "-polyamideLayerBackHoleS";
        expression += TString("_") + layers->GetName();
        expression += ":polyamideLayerBackHole_pos";
 
        polyamideLayerBackS->MakeNode(expression);
        polyamideLayerBackS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* polyamideLayerFrontV =
        new TGeoVolume(TString("polyamideLayerFrontV") += TString("_") + layers->GetName(), polyamideLayerFrontS);
    TGeoVolume* polyamideLayerBackV =
        new TGeoVolume(TString("polyamideLayerBackV") += TString("_") + layers->GetName(), polyamideLayerBackS);
 
    // volume medium
    TGeoMedium* polyamideLayerV_medium = pMedPolyamide;
    if (polyamideLayerV_medium) {
        polyamideLayerFrontV->SetMedium(polyamideLayerV_medium);
        polyamideLayerBackV->SetMedium(polyamideLayerV_medium);
    } else
        Fatal("Main", "Invalid medium for polyamideLayerV!");
 
    // volume visual property (transparency)
    polyamideLayerFrontV->SetLineColor(TColor::GetColor("#fefe22"));
    polyamideLayerFrontV->SetTransparency(0);
    polyamideLayerBackV->SetLineColor(TColor::GetColor("#fefe22"));
    polyamideLayerBackV->SetTransparency(0);
 
    TGeoCombiTrans* polyamideLayerFront_transf[1];
 
    polyamideLayerFront_transf[0] = new TGeoCombiTrans();
    polyamideLayerFront_transf[0]->SetDx(+layerFront_XShift);
    polyamideLayerFront_transf[0]->SetDy(+layerFront_YShift);
    polyamideLayerFront_transf[0]->SetDz(-ZGEMSize_Station163x45 * 0.5 + copperLayer_ZSize + glueLayer_ZSize
                                         + epoxideLayer_ZSize + honeycombLayer_ZSize + polyamideLayer_ZSize * 0.5);
 
    TGeoCombiTrans* polyamideLayerBack_transf[1];
 
    polyamideLayerBack_transf[0] = new TGeoCombiTrans();
    polyamideLayerBack_transf[0]->SetDx(+layerBack_XShift);
    polyamideLayerBack_transf[0]->SetDy(+layerBack_YShift);
    polyamideLayerBack_transf[0]->SetDz(+ZGEMSize_Station163x45 * 0.5 - copperLayer_ZSize * 0.5 - glueLayer_ZSize
                                        - epoxideLayer_ZSize - honeycombLayer_ZSize - polyamideLayer_ZSize * 0.5);
 
    layers->AddNode(polyamideLayerFrontV, 0, polyamideLayerFront_transf[0]);
    layers->AddNode(polyamideLayerBackV, 0, polyamideLayerBack_transf[0]);
    //--------------------------------------------------------------------------
 
    return layers;
}
 
TGeoVolume* CreateFrameForModule_Station163x45(TString frame_name,
                                               Double_t dx,
                                               Double_t dy,
                                               Double_t dz,
                                               Double_t hole_radius)
{
 
    // frame shapes
    TGeoShape* vertical_frameS =
        new TGeoBBox("vertical_frameS", dx * 0.5, YModuleSize_Station163x45 * 0.5 + dy, dz * 0.5);
    TGeoShape* horizontal_upper_frameS =
        new TGeoBBox("horizontal_upper_frameS", XModuleSize_Station163x45 * 0.5, dy * 0.5, dz * 0.5);
    TGeoShape* horizontal_bottom_frameS = new TGeoBBox(
        "horizontal_upper_frameS", XModuleSize_Station163x45 * 0.5 - hole_radius * 0.5, dy * 0.5, dz * 0.5);
 
    // frame volumes
    TGeoVolume* composite_frameV = new TGeoVolumeAssembly(frame_name);
    TGeoVolume* vertical_frameV = new TGeoVolume(frame_name + "_vertical_frameV", vertical_frameS);
    TGeoVolume* horizontal_upper_frameV =
        new TGeoVolume(frame_name + "_horizontal_upper_frameV", horizontal_upper_frameS);
    TGeoVolume* horizontal_bottom_frameV =
        new TGeoVolume(frame_name + "_horizontal_bottom_frameV", horizontal_bottom_frameS);
 
    // media
    TGeoMedium* frame_medium = pMedCarbon;   // set medium
    if (pMedCarbon) {
        vertical_frameV->SetMedium(frame_medium);
        horizontal_upper_frameV->SetMedium(frame_medium);
        horizontal_bottom_frameV->SetMedium(frame_medium);
    } else
        Fatal("Main", "Invalid medium for frames!");
    if (pMedAir) {
        composite_frameV->SetMedium(pMedAir);
    } else
        Fatal("Main", "Invalid medium for frames!");
 
    // visual parameters
    vertical_frameV->SetLineColor(TColor::GetColor("#9999ff"));
    horizontal_upper_frameV->SetLineColor(TColor::GetColor("#9999ff"));
    horizontal_bottom_frameV->SetLineColor(TColor::GetColor("#9999ff"));
 
    // frame part positions in the frame
    TGeoCombiTrans* left_vertical_frame_position = new TGeoCombiTrans();
    left_vertical_frame_position->SetTranslation(XModuleSize_Station163x45 * 0.5 + dXFrame_Station163x45 * 0.5, 0.0,
                                                 0.0);
 
    TGeoCombiTrans* upper_horizontal_frame_position = new TGeoCombiTrans();
    upper_horizontal_frame_position->SetTranslation(0.0, YModuleSize_Station163x45 * 0.5 + dYFrame_Station163x45 * 0.5,
                                                    0.0);
 
    TGeoCombiTrans* bottom_horizontal_frame_position = new TGeoCombiTrans();
    bottom_horizontal_frame_position->SetTranslation(
        hole_radius * 0.5, -YModuleSize_Station163x45 * 0.5 - dYFrame_Station163x45 * 0.5, 0.0);
 
    composite_frameV->AddNode(vertical_frameV, 0, left_vertical_frame_position);
    composite_frameV->AddNode(horizontal_upper_frameV, 0, upper_horizontal_frame_position);
    composite_frameV->AddNode(horizontal_bottom_frameV, 0, bottom_horizontal_frame_position);
 
    return composite_frameV;
}
 
//------------------------------------------------------------------------------
TGeoVolume* CreateFrameForHalfPlane_Station163x45(TString frame_name)
{
 
    // frame volumes
    TGeoVolume* frames = new TGeoVolumeAssembly(frame_name);
    frames->SetMedium(pMedAir);
 
    // back lower epoxide frame -------------------------------------------------
    Double_t backLowerEpoxideFrame_XSize = 161.42;   // cm
    Double_t backLowerEpoxideFrame_YSize = 2.2;      // cm
    Double_t backLowerEpoxideFrame_ZSize = 1.6;      // cm
 
    Double_t backLowerEpoxideFrameArch_Rmin = 4.0;
    Double_t backLowerEpoxideFrameArch_Rmax = 6.0;
    Double_t backLowerEpoxideFrameArch_ZSize = backLowerEpoxideFrame_ZSize;
 
    TGeoShape* backLowerEpoxideFrameHalfS =
        new TGeoBBox(TString("backLowerEpoxideFrameHalfS") += TString("_") + frames->GetName(),
                     (backLowerEpoxideFrame_XSize * 0.5 - backLowerEpoxideFrameArch_Rmin) * 0.5,
                     backLowerEpoxideFrame_YSize * 0.5, backLowerEpoxideFrame_ZSize * 0.5);
    TGeoShape* backLowerEpoxideFrameArchS = new TGeoTubeSeg(
        TString("backLowerEpoxideFrameArchS") += TString("_") + frames->GetName(), backLowerEpoxideFrameArch_Rmin,
        backLowerEpoxideFrameArch_Rmax, backLowerEpoxideFrameArch_ZSize * 0.5, 0.0, 180.0);
 
    TGeoTranslation* backLowerEpoxideFrameHalf_pos1 = new TGeoTranslation();
    backLowerEpoxideFrameHalf_pos1->SetName("backLowerEpoxideFrameHalf1_pos1");
    backLowerEpoxideFrameHalf_pos1->SetDx(
        +((backLowerEpoxideFrame_XSize * 0.5 - backLowerEpoxideFrameArch_Rmin) * 0.5 + backLowerEpoxideFrameArch_Rmin));
    backLowerEpoxideFrameHalf_pos1->SetDy(-(backLowerEpoxideFrame_YSize * 0.5) + 0.2 /*shift*/);
    backLowerEpoxideFrameHalf_pos1->SetDz(0.0);
    backLowerEpoxideFrameHalf_pos1->RegisterYourself();
 
    TGeoTranslation* backLowerEpoxideFrameHalf_pos2 = new TGeoTranslation();
    backLowerEpoxideFrameHalf_pos2->SetName("backLowerEpoxideFrameHalf1_pos2");
    backLowerEpoxideFrameHalf_pos2->SetDx(
        -((backLowerEpoxideFrame_XSize * 0.5 - backLowerEpoxideFrameArch_Rmin) * 0.5 + backLowerEpoxideFrameArch_Rmin));
    backLowerEpoxideFrameHalf_pos2->SetDy(-(backLowerEpoxideFrame_YSize * 0.5) + 0.2 /*shift*/);
    backLowerEpoxideFrameHalf_pos2->SetDz(0.0);
    backLowerEpoxideFrameHalf_pos2->RegisterYourself();
 
    TGeoTranslation* backLowerEpoxideFrameArch_pos = new TGeoTranslation();
    backLowerEpoxideFrameArch_pos->SetName("backLowerEpoxideFrameArch_pos");
    backLowerEpoxideFrameArch_pos->SetDx(0.0);
    backLowerEpoxideFrameArch_pos->SetDy(0.0);
    backLowerEpoxideFrameArch_pos->SetDz(0.0);
    backLowerEpoxideFrameArch_pos->RegisterYourself();
 
    TGeoCompositeShape* backLowerEpoxideFrameS = new TGeoCompositeShape();
    backLowerEpoxideFrameS->SetName(TString("backLowerEpoxideFrameS") += TString("_") + frames->GetName());
    {
        TString expression = "backLowerEpoxideFrameHalfS";
        expression += TString("_") + frames->GetName();
        expression += ":backLowerEpoxideFrameHalf1_pos1";
        expression += "+backLowerEpoxideFrameHalfS";
        expression += TString("_") + frames->GetName();
        expression += ":backLowerEpoxideFrameHalf1_pos2";
        expression += "+backLowerEpoxideFrameArchS";
        expression += TString("_") + frames->GetName();
        expression += ":backLowerEpoxideFrameArch_pos";
 
        backLowerEpoxideFrameS->MakeNode(expression);
        backLowerEpoxideFrameS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* backLowerEpoxideFrameV =
        new TGeoVolume(TString("backLowerEpoxideFrameV") += TString("_") + frames->GetName(), backLowerEpoxideFrameS);
 
    // volume medium
    TGeoMedium* backLowerEpoxideFrameV_medium = pMedEpoxideCompound;
    if (backLowerEpoxideFrameV_medium) {
        backLowerEpoxideFrameV->SetMedium(backLowerEpoxideFrameV_medium);
    } else
        Fatal("Main", "Invalid medium for backLowerEpoxideFrameV!");
 
    // volume visual property (transparency)
    backLowerEpoxideFrameV->SetLineColor(TColor::GetColor("#ccccff"));
    backLowerEpoxideFrameV->SetTransparency(0);
 
    TGeoCombiTrans* backLowerEpoxideFrame_transf[1];
 
    backLowerEpoxideFrame_transf[0] = new TGeoCombiTrans();
    backLowerEpoxideFrame_transf[0]->SetDx(0.0);
    backLowerEpoxideFrame_transf[0]->SetDy(-(YModuleSize_Station163x45 * 0.5));
    backLowerEpoxideFrame_transf[0]->SetDz(+(backLowerEpoxideFrame_ZSize * 0.5 + ZModuleSize_Station163x45 * 0.5));
 
    frames->AddNode(backLowerEpoxideFrameV, 0, backLowerEpoxideFrame_transf[0]);
    //--------------------------------------------------------------------------
 
    // front lower epoxide frame -------------------------------------------------
    Double_t frontLowerEpoxideFrame_XSize = 161.7;   // cm
    Double_t frontLowerEpoxideFrame_YSize = 2.2;     // cm
    Double_t frontLowerEpoxideFrame_ZSize = 1.6;     // cm
 
    Double_t frontLowerEpoxideFrameArch_Rmin = 4.0;
    Double_t frontLowerEpoxideFrameArch_Rmax = 6.0;
    Double_t frontLowerEpoxideFrameArch_ZSize = frontLowerEpoxideFrame_ZSize;
 
    TGeoShape* frontLowerEpoxideFrameHalfS =
        new TGeoBBox(TString("frontLowerEpoxideFrameHalfS") += TString("_") + frames->GetName(),
                     (frontLowerEpoxideFrame_XSize * 0.5 - frontLowerEpoxideFrameArch_Rmin) * 0.5,
                     frontLowerEpoxideFrame_YSize * 0.5, frontLowerEpoxideFrame_ZSize * 0.5);
    TGeoShape* frontLowerEpoxideFrameArchS = new TGeoTubeSeg(
        TString("frontLowerEpoxideFrameArchS") += TString("_") + frames->GetName(), frontLowerEpoxideFrameArch_Rmin,
        frontLowerEpoxideFrameArch_Rmax, frontLowerEpoxideFrameArch_ZSize * 0.5, 0.0, 180.0);
 
    TGeoTranslation* frontLowerEpoxideFrameHalf_pos1 = new TGeoTranslation();
    frontLowerEpoxideFrameHalf_pos1->SetName("frontLowerEpoxideFrameHalf1_pos1");
    frontLowerEpoxideFrameHalf_pos1->SetDx(
        +((frontLowerEpoxideFrame_XSize * 0.5 - frontLowerEpoxideFrameArch_Rmin) * 0.5
          + frontLowerEpoxideFrameArch_Rmin));
    frontLowerEpoxideFrameHalf_pos1->SetDy(-(frontLowerEpoxideFrame_YSize * 0.5) + 0.2 /*shift*/);
    frontLowerEpoxideFrameHalf_pos1->SetDz(0.0);
    frontLowerEpoxideFrameHalf_pos1->RegisterYourself();
 
    TGeoTranslation* frontLowerEpoxideFrameHalf_pos2 = new TGeoTranslation();
    frontLowerEpoxideFrameHalf_pos2->SetName("frontLowerEpoxideFrameHalf1_pos2");
    frontLowerEpoxideFrameHalf_pos2->SetDx(
        -((frontLowerEpoxideFrame_XSize * 0.5 - frontLowerEpoxideFrameArch_Rmin) * 0.5
          + frontLowerEpoxideFrameArch_Rmin));
    frontLowerEpoxideFrameHalf_pos2->SetDy(-(frontLowerEpoxideFrame_YSize * 0.5) + 0.2 /*shift*/);
    frontLowerEpoxideFrameHalf_pos2->SetDz(0.0);
    frontLowerEpoxideFrameHalf_pos2->RegisterYourself();
 
    TGeoTranslation* frontLowerEpoxideFrameArch_pos = new TGeoTranslation();
    frontLowerEpoxideFrameArch_pos->SetName("frontLowerEpoxideFrameArch_pos");
    frontLowerEpoxideFrameArch_pos->SetDx(0.0);
    frontLowerEpoxideFrameArch_pos->SetDy(0.0);
    frontLowerEpoxideFrameArch_pos->SetDz(0.0);
    frontLowerEpoxideFrameArch_pos->RegisterYourself();
 
    TGeoCompositeShape* frontLowerEpoxideFrameS = new TGeoCompositeShape();
    frontLowerEpoxideFrameS->SetName(TString("frontLowerEpoxideFrameS") += TString("_") + frames->GetName());
    {
        TString expression = "frontLowerEpoxideFrameHalfS";
        expression += TString("_") + frames->GetName();
        expression += ":frontLowerEpoxideFrameHalf1_pos1";
        expression += "+frontLowerEpoxideFrameHalfS";
        expression += TString("_") + frames->GetName();
        expression += ":frontLowerEpoxideFrameHalf1_pos2";
        expression += "+frontLowerEpoxideFrameArchS";
        expression += TString("_") + frames->GetName();
        expression += ":frontLowerEpoxideFrameArch_pos";
 
        frontLowerEpoxideFrameS->MakeNode(expression);
        frontLowerEpoxideFrameS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* frontLowerEpoxideFrameV =
        new TGeoVolume(TString("frontLowerEpoxideFrameV") += TString("_") + frames->GetName(), frontLowerEpoxideFrameS);
 
    // volume medium
    TGeoMedium* frontLowerEpoxideFrameV_medium = pMedEpoxideCompound;
    if (frontLowerEpoxideFrameV_medium) {
        frontLowerEpoxideFrameV->SetMedium(frontLowerEpoxideFrameV_medium);
    } else
        Fatal("Main", "Invalid medium for frontLowerEpoxideFrameV!");
 
    // volume visual property (transparency)
    frontLowerEpoxideFrameV->SetLineColor(TColor::GetColor("#ccccff"));
    frontLowerEpoxideFrameV->SetTransparency(0);
 
    TGeoCombiTrans* frontLowerEpoxideFrame_transf[1];
 
    frontLowerEpoxideFrame_transf[0] = new TGeoCombiTrans();
    frontLowerEpoxideFrame_transf[0]->SetDx(0.0);
    frontLowerEpoxideFrame_transf[0]->SetDy(-(YModuleSize_Station163x45 * 0.5));
    frontLowerEpoxideFrame_transf[0]->SetDz(-(frontLowerEpoxideFrame_ZSize * 0.5 + ZModuleSize_Station163x45 * 0.5));
 
    frames->AddNode(frontLowerEpoxideFrameV, 0, frontLowerEpoxideFrame_transf[0]);
    //--------------------------------------------------------------------------
 
    // back side epoxide frame --------------------------------------------------
    Double_t backSideEpoxideFramePart_XSize = 9.2;    // cm
    Double_t backSideEpoxideFramePart_YSize = 52.6;   // cm
    Double_t backSideEpoxideFramePart_ZSize = 1.6;    // cm
 
    Double_t backSideEpoxideFrame_XDistBetweenParts = 161.42;   // cm
 
    TGeoShape* backSideEpoxideFramePartS = new TGeoBBox(
        TString("backSideEpoxideFramePartS") += TString("_") + frames->GetName(), backSideEpoxideFramePart_XSize * 0.5,
        backSideEpoxideFramePart_YSize * 0.5, backSideEpoxideFramePart_ZSize * 0.5);
 
    TGeoTranslation* backSideEpoxideFramePart_pos1 = new TGeoTranslation();
    backSideEpoxideFramePart_pos1->SetName("backSideEpoxideFramePart_pos1");
    backSideEpoxideFramePart_pos1->SetDx(
        +(backSideEpoxideFrame_XDistBetweenParts * 0.5 + backSideEpoxideFramePart_XSize * 0.5));
    backSideEpoxideFramePart_pos1->SetDy(0.0);
    backSideEpoxideFramePart_pos1->SetDz(0.0);
    backSideEpoxideFramePart_pos1->RegisterYourself();
 
    TGeoTranslation* backSideEpoxideFramePart_pos2 = new TGeoTranslation();
    backSideEpoxideFramePart_pos2->SetName("backSideEpoxideFramePart_pos2");
    backSideEpoxideFramePart_pos2->SetDx(
        -(backSideEpoxideFrame_XDistBetweenParts * 0.5 + backSideEpoxideFramePart_XSize * 0.5));
    backSideEpoxideFramePart_pos2->SetDy(0.0);
    backSideEpoxideFramePart_pos2->SetDz(0.0);
    backSideEpoxideFramePart_pos2->RegisterYourself();
 
    TGeoCompositeShape* backSideEpoxideFrameS = new TGeoCompositeShape();
    backSideEpoxideFrameS->SetName(TString("backSideEpoxideFrameS") += TString("_") + frames->GetName());
    {
        TString expression = "backSideEpoxideFramePartS";
        expression += TString("_") + frames->GetName();
        expression += ":backSideEpoxideFramePart_pos1";
        expression += "+backSideEpoxideFramePartS";
        expression += TString("_") + frames->GetName();
        expression += ":backSideEpoxideFramePart_pos2";
 
        backSideEpoxideFrameS->MakeNode(expression);
        backSideEpoxideFrameS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* backSideEpoxideFrameV =
        new TGeoVolume(TString("backSideEpoxideFrameV") += TString("_") + frames->GetName(), backSideEpoxideFrameS);
 
    // volume medium
    TGeoMedium* backSideEpoxideFrameV_medium = pMedEpoxideCompound;
    if (backSideEpoxideFrameV_medium) {
        backSideEpoxideFrameV->SetMedium(backSideEpoxideFrameV_medium);
    } else
        Fatal("Main", "Invalid medium for backSideEpoxideFrameV!");
 
    // volume visual property (transparency)
    backSideEpoxideFrameV->SetLineColor(TColor::GetColor("#ccccff"));
    backSideEpoxideFrameV->SetTransparency(0);
 
    TGeoCombiTrans* backSideEpoxideFrame_transf[1];
 
    backSideEpoxideFrame_transf[0] = new TGeoCombiTrans();
    backSideEpoxideFrame_transf[0]->SetDx(0.0);
    backSideEpoxideFrame_transf[0]->SetDy(+((backSideEpoxideFramePart_YSize - YModuleSize_Station163x45) * 0.5)
                                          - frontLowerEpoxideFrame_YSize + 0.2 /*shift*/);
    backSideEpoxideFrame_transf[0]->SetDz(+(backSideEpoxideFramePart_ZSize * 0.5 + ZModuleSize_Station163x45 * 0.5));
 
    frames->AddNode(backSideEpoxideFrameV, 0, backSideEpoxideFrame_transf[0]);
    //--------------------------------------------------------------------------
 
    // back upper epoxide frame -------------------------------------------------
    Double_t backUpperEpoxideFrame_XSize = 161.42;   // cm
    Double_t backUpperEpoxideFrame_YSize = 6.2;      // cm
    Double_t backUpperEpoxideFrame_ZSize = 1.6;      // cm
 
    TGeoShape* backUpperEpoxideFrameS =
        new TGeoBBox("backUpperEpoxideFrameS", backUpperEpoxideFrame_XSize * 0.5, backUpperEpoxideFrame_YSize * 0.5,
                     backUpperEpoxideFrame_ZSize * 0.5);
 
    TGeoVolume* backUpperEpoxideFrameV =
        new TGeoVolume(TString("backUpperEpoxideFrameV") += TString("_") + frames->GetName(), backUpperEpoxideFrameS);
 
    // volume medium
    TGeoMedium* backUpperEpoxideFrameV_medium = pMedEpoxideCompound;
    if (backUpperEpoxideFrameV_medium) {
        backUpperEpoxideFrameV->SetMedium(backUpperEpoxideFrameV_medium);
    } else
        Fatal("Main", "Invalid medium for backUpperEpoxideFrameV!");
 
    // volume visual property (transparency)
    backUpperEpoxideFrameV->SetLineColor(TColor::GetColor("#ccccff"));
    backUpperEpoxideFrameV->SetTransparency(0);
 
    TGeoCombiTrans* backUpperEpoxideFrame_transf[1];
 
    backUpperEpoxideFrame_transf[0] = new TGeoCombiTrans();
    backUpperEpoxideFrame_transf[0]->SetDx(0.0);
    backUpperEpoxideFrame_transf[0]->SetDy(+(backUpperEpoxideFrame_YSize * 0.5 + YModuleSize_Station163x45 * 0.5)
                                           - 0.6 /*shift*/);
    backUpperEpoxideFrame_transf[0]->SetDz(+(backUpperEpoxideFrame_ZSize * 0.5 + ZModuleSize_Station163x45 * 0.5));
 
    frames->AddNode(backUpperEpoxideFrameV, 0, backUpperEpoxideFrame_transf[0]);
    //--------------------------------------------------------------------------
 
    // front side epoxide frame -------------------------------------------------
    Double_t frontSideEpoxideFramePart_XSize = 3.5;    // cm
    Double_t frontSideEpoxideFramePart_YSize = 49.9;   // cm
    Double_t frontSideEpoxideFramePart_ZSize = 1.6;    // cm
 
    Double_t frontSideEpoxideFrame_XDistBetweenParts = 161.7;   // cm
 
    TGeoShape* frontSideEpoxideFramePartS =
        new TGeoBBox(TString("frontSideEpoxideFramePartS") += TString("_") + frames->GetName(),
                     frontSideEpoxideFramePart_XSize * 0.5, frontSideEpoxideFramePart_YSize * 0.5,
                     frontSideEpoxideFramePart_ZSize * 0.5);
 
    TGeoTranslation* frontSideEpoxideFramePart_pos1 = new TGeoTranslation();
    frontSideEpoxideFramePart_pos1->SetName("frontSideEpoxideFramePart_pos1");
    frontSideEpoxideFramePart_pos1->SetDx(
        +(frontSideEpoxideFrame_XDistBetweenParts * 0.5 + frontSideEpoxideFramePart_XSize * 0.5));
    frontSideEpoxideFramePart_pos1->SetDy(0.0);
    frontSideEpoxideFramePart_pos1->SetDz(0.0);
    frontSideEpoxideFramePart_pos1->RegisterYourself();
 
    TGeoTranslation* frontSideEpoxideFramePart_pos2 = new TGeoTranslation();
    frontSideEpoxideFramePart_pos2->SetName("frontSideEpoxideFramePart_pos2");
    frontSideEpoxideFramePart_pos2->SetDx(
        -(frontSideEpoxideFrame_XDistBetweenParts * 0.5 + frontSideEpoxideFramePart_XSize * 0.5));
    frontSideEpoxideFramePart_pos2->SetDy(0.0);
    frontSideEpoxideFramePart_pos2->SetDz(0.0);
    frontSideEpoxideFramePart_pos2->RegisterYourself();
 
    TGeoCompositeShape* frontSideEpoxideFrameS = new TGeoCompositeShape();
    frontSideEpoxideFrameS->SetName(TString("frontSideEpoxideFrameS") += TString("_") + frames->GetName());
    {
        TString expression = "frontSideEpoxideFramePartS";
        expression += TString("_") + frames->GetName();
        expression += ":frontSideEpoxideFramePart_pos1";
        expression += "+frontSideEpoxideFramePartS";
        expression += TString("_") + frames->GetName();
        expression += ":frontSideEpoxideFramePart_pos2";
 
        frontSideEpoxideFrameS->MakeNode(expression);
        frontSideEpoxideFrameS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* frontSideEpoxideFrameV =
        new TGeoVolume(TString("frontSideEpoxideFrameV") += TString("_") + frames->GetName(), frontSideEpoxideFrameS);
 
    // volume medium
    TGeoMedium* frontSideEpoxideFrameV_medium = pMedEpoxideCompound;
    if (frontSideEpoxideFrameV_medium) {
        frontSideEpoxideFrameV->SetMedium(frontSideEpoxideFrameV_medium);
    } else
        Fatal("Main", "Invalid medium for frontSideEpoxideFrameV!");
 
    // volume visual property (transparency)
    frontSideEpoxideFrameV->SetLineColor(TColor::GetColor("#ccccff"));
    frontSideEpoxideFrameV->SetTransparency(0);
 
    TGeoCombiTrans* frontSideEpoxideFrame_transf[1];
 
    frontSideEpoxideFrame_transf[0] = new TGeoCombiTrans();
    frontSideEpoxideFrame_transf[0]->SetDx(0.0);
    frontSideEpoxideFrame_transf[0]->SetDy(+((frontSideEpoxideFramePart_YSize - YModuleSize_Station163x45) * 0.5)
                                           - frontLowerEpoxideFrame_YSize + 0.2 /*shift*/);
    frontSideEpoxideFrame_transf[0]->SetDz(-(frontSideEpoxideFramePart_ZSize * 0.5 + ZModuleSize_Station163x45 * 0.5));
 
    frames->AddNode(frontSideEpoxideFrameV, 0, frontSideEpoxideFrame_transf[0]);
    //--------------------------------------------------------------------------
 
    // front upper epoxide frame -------------------------------------------------
    Double_t frontUpperEpoxideFrame_XSize = 161.7;   // cm
    Double_t frontUpperEpoxideFrame_YSize = 3.5;     // cm
    Double_t frontUpperEpoxideFrame_ZSize = 1.6;     // cm
 
    TGeoShape* frontUpperEpoxideFrameS =
        new TGeoBBox("frontUpperEpoxideFrameS", frontUpperEpoxideFrame_XSize * 0.5, frontUpperEpoxideFrame_YSize * 0.5,
                     frontUpperEpoxideFrame_ZSize * 0.5);
 
    TGeoVolume* frontUpperEpoxideFrameV =
        new TGeoVolume(TString("frontUpperEpoxideFrameV") += TString("_") + frames->GetName(), frontUpperEpoxideFrameS);
 
    // volume medium
    TGeoMedium* frontUpperEpoxideFrameV_medium = pMedEpoxideCompound;
    if (frontUpperEpoxideFrameV_medium) {
        frontUpperEpoxideFrameV->SetMedium(frontUpperEpoxideFrameV_medium);
    } else
        Fatal("Main", "Invalid medium for frontUpperEpoxideFrameV!");
 
    // volume visual property (transparency)
    frontUpperEpoxideFrameV->SetLineColor(TColor::GetColor("#ccccff"));
    frontUpperEpoxideFrameV->SetTransparency(0);
 
    TGeoCombiTrans* frontUpperEpoxideFrame_transf[1];
 
    frontUpperEpoxideFrame_transf[0] = new TGeoCombiTrans();
    frontUpperEpoxideFrame_transf[0]->SetDx(0.0);
    frontUpperEpoxideFrame_transf[0]->SetDy(+(frontUpperEpoxideFrame_YSize * 0.5 + YModuleSize_Station163x45 * 0.5)
                                            - 0.6 /*shift*/);
    frontUpperEpoxideFrame_transf[0]->SetDz(-(frontUpperEpoxideFrame_ZSize * 0.5 + ZModuleSize_Station163x45 * 0.5));
 
    frames->AddNode(frontUpperEpoxideFrameV, 0, frontUpperEpoxideFrame_transf[0]);
    //--------------------------------------------------------------------------
 
    // alum. cable support ------------------------------------------------------
    Double_t alumCableSupportPart_XSize = 3.0;    // cm
    Double_t alumCableSupportPart_YSize = 41.3;   // cm
    Double_t alumCableSupportPart_ZSize = 0.2;    // cm
 
    Double_t alumCableSupport_XDistBetweenParts = 164.82;   // cm
 
    TGeoShape* alumCableSupportPartS = new TGeoBBox(
        TString("alumCableSupportPartS") += TString("_") + frames->GetName(), alumCableSupportPart_XSize * 0.5,
        alumCableSupportPart_YSize * 0.5, alumCableSupportPart_ZSize * 0.5);
 
    TGeoTranslation* alumCableSupportPart_pos1 = new TGeoTranslation();
    alumCableSupportPart_pos1->SetName("alumCableSupportPart_pos1");
    alumCableSupportPart_pos1->SetDx(+(alumCableSupport_XDistBetweenParts * 0.5 + alumCableSupportPart_XSize * 0.5));
    alumCableSupportPart_pos1->SetDy(0.0);
    alumCableSupportPart_pos1->SetDz(0.0);
    alumCableSupportPart_pos1->RegisterYourself();
 
    TGeoTranslation* alumCableSupportPart_pos2 = new TGeoTranslation();
    alumCableSupportPart_pos2->SetName("alumCableSupportPart_pos2");
    alumCableSupportPart_pos2->SetDx(-(alumCableSupport_XDistBetweenParts * 0.5 + alumCableSupportPart_XSize * 0.5));
    alumCableSupportPart_pos2->SetDy(0.0);
    alumCableSupportPart_pos2->SetDz(0.0);
    alumCableSupportPart_pos2->RegisterYourself();
 
    TGeoCompositeShape* alumCableSupportS = new TGeoCompositeShape();
    alumCableSupportS->SetName(TString("alumCableSupportS") += TString("_") + frames->GetName());
    {
        TString expression = "alumCableSupportPartS";
        expression += TString("_") + frames->GetName();
        expression += ":alumCableSupportPart_pos1";
        expression += "+alumCableSupportPartS";
        expression += TString("_") + frames->GetName();
        expression += ":alumCableSupportPart_pos2";
 
        alumCableSupportS->MakeNode(expression);
        alumCableSupportS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* alumCableSupportV =
        new TGeoVolume(TString("alumCableSupportV") += TString("_") + frames->GetName(), alumCableSupportS);
 
    // volume medium
    TGeoMedium* alumCableSupportV_medium = pMedAluminium;
    if (alumCableSupportV_medium) {
        alumCableSupportV->SetMedium(alumCableSupportV_medium);
    } else
        Fatal("Main", "Invalid medium for alumCableSupportV!");
 
    // volume visual property (transparency)
    alumCableSupportV->SetLineColor(TColor::GetColor("#ffcccc"));
    alumCableSupportV->SetTransparency(0);
 
    TGeoCombiTrans* alumCableSupport_transf[1];
 
    alumCableSupport_transf[0] = new TGeoCombiTrans();
    alumCableSupport_transf[0]->SetDx(0.0);
    alumCableSupport_transf[0]->SetDy(+((alumCableSupportPart_YSize - YModuleSize_Station163x45) * 0.5)
                                      - frontLowerEpoxideFrame_YSize + 0.2 /*shift*/);
    alumCableSupport_transf[0]->SetDz(-(alumCableSupportPart_ZSize * 0.5 + ZModuleSize_Station163x45 * 0.5
                                        + frontSideEpoxideFramePart_ZSize + 1.0 /*shift*/));
 
    frames->AddNode(alumCableSupportV, 0, alumCableSupport_transf[0]);
    //--------------------------------------------------------------------------
 
    // amplifier upper block ----------------------------------------------------
    Double_t amplifierUpperBlockPart1_XSize = 161.44;   // cm
    Double_t amplifierUpperBlockPart1_YSize = 0.6;      // cm
    Double_t amplifierUpperBlockPart1_ZSize = 8.41;     // cm
 
    Double_t amplifierUpperBlockPart2_XSize = 161.16;   // cm
    Double_t amplifierUpperBlockPart2_YSize = 0.6;      // cm
    Double_t amplifierUpperBlockPart2_ZSize = 8.41;     // cm
 
    TGeoShape* amplifierUpperBlockPart1S = new TGeoBBox(
        TString("amplifierUpperBlockPart1S") += TString("_") + frames->GetName(), amplifierUpperBlockPart1_XSize * 0.5,
        amplifierUpperBlockPart1_YSize * 0.5, amplifierUpperBlockPart1_ZSize * 0.5);
    TGeoShape* amplifierUpperBlockPart2S = new TGeoBBox(
        TString("amplifierUpperBlockPart2S") += TString("_") + frames->GetName(), amplifierUpperBlockPart2_XSize * 0.5,
        amplifierUpperBlockPart2_YSize * 0.5, amplifierUpperBlockPart2_ZSize * 0.5);
 
    TGeoTranslation* amplifierUpperBlockPart1_pos = new TGeoTranslation();
    amplifierUpperBlockPart1_pos->SetName("amplifierUpperBlockPart1_pos");
    amplifierUpperBlockPart1_pos->SetDx(0.0);
    amplifierUpperBlockPart1_pos->SetDy(0.0);
    amplifierUpperBlockPart1_pos->SetDz(0.0);
    amplifierUpperBlockPart1_pos->RegisterYourself();
 
    TGeoTranslation* amplifierUpperBlockPart2_pos = new TGeoTranslation();
    amplifierUpperBlockPart2_pos->SetName("amplifierUpperBlockPart2_pos");
    amplifierUpperBlockPart2_pos->SetDx(-0.76);
    amplifierUpperBlockPart2_pos->SetDy(
        -(amplifierUpperBlockPart1_YSize * 0.5 + amplifierUpperBlockPart2_YSize * 0.5 + 0.33));
    amplifierUpperBlockPart2_pos->SetDz(0.0);
    amplifierUpperBlockPart2_pos->RegisterYourself();
 
    TGeoCompositeShape* amplifierUpperBlockS = new TGeoCompositeShape();
    amplifierUpperBlockS->SetName(TString("amplifierUpperBlockS") += TString("_") + frames->GetName());
    {
        TString expression = "amplifierUpperBlockPart1S";
        expression += TString("_") + frames->GetName();
        expression += ":amplifierUpperBlockPart1_pos";
        expression += "+amplifierUpperBlockPart1S";
        expression += TString("_") + frames->GetName();
        expression += ":amplifierUpperBlockPart2_pos";
 
        amplifierUpperBlockS->MakeNode(expression);
        amplifierUpperBlockS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* amplifierUpperBlockV =
        new TGeoVolume(TString("amplifierUpperBlockV") += TString("_") + frames->GetName(), amplifierUpperBlockS);
 
    // volume medium
    TGeoMedium* amplifierUpperBlockV_medium = pMedFiberGlass;
    if (amplifierUpperBlockV_medium) {
        amplifierUpperBlockV->SetMedium(amplifierUpperBlockV_medium);
    } else
        Fatal("Main", "Invalid medium for amplifierUpperBlockV!");
 
    // volume visual property (transparency)
    amplifierUpperBlockV->SetLineColor(TColor::GetColor("#ccffcc"));
    amplifierUpperBlockV->SetTransparency(0);
 
    TGeoCombiTrans* amplifierUpperBlock_transf[1];
 
    amplifierUpperBlock_transf[0] = new TGeoCombiTrans();
    amplifierUpperBlock_transf[0]->SetDx(0.0);
    amplifierUpperBlock_transf[0]->SetDy(+(YModuleSize_Station163x45 * 0.5 + backUpperEpoxideFrame_YSize)
                                         - 1.0 /*shift*/);
    amplifierUpperBlock_transf[0]->SetDz(-(amplifierUpperBlockPart1_ZSize * 0.5) + ZModuleSize_Station163x45 * 0.5);
 
    frames->AddNode(amplifierUpperBlockV, 0, amplifierUpperBlock_transf[0]);
    //--------------------------------------------------------------------------
 
    // amplifier side block -----------------------------------------------------
    Double_t amplifierSideBlockPartBig_XSize = 0.6;    // cm
    Double_t amplifierSideBlockPartBig_YSize = 33.9;   // cm
    Double_t amplifierSideBlockPartBig_ZSize = 8.41;   // cm
 
    Double_t amplifierSideBlockPartSmall_XSize = 0.6;     // cm
    Double_t amplifierSideBlockPartSmall_YSize = 27.05;   // cm
    Double_t amplifierSideBlockPartSmall_ZSize = 8.41;    // cm
 
    TGeoShape* amplifierSideBlockPartBigS =
        new TGeoBBox(TString("amplifierSideBlockPartBigS") += TString("_") + frames->GetName(),
                     amplifierSideBlockPartBig_XSize * 0.5, amplifierSideBlockPartBig_YSize * 0.5,
                     amplifierSideBlockPartBig_ZSize * 0.5);
    TGeoShape* amplifierSideBlockPartSmallS =
        new TGeoBBox(TString("amplifierSideBlockPartSmallS") += TString("_") + frames->GetName(),
                     amplifierSideBlockPartSmall_XSize * 0.5, amplifierSideBlockPartSmall_YSize * 0.5,
                     amplifierSideBlockPartSmall_ZSize * 0.5);
 
    TGeoTranslation* amplifierSideBlockPartBig_pos = new TGeoTranslation();
    amplifierSideBlockPartBig_pos->SetName("amplifierSideBlockPartBig_pos");
    amplifierSideBlockPartBig_pos->SetDx(0.0);
    amplifierSideBlockPartBig_pos->SetDy(0.0);
    amplifierSideBlockPartBig_pos->SetDz(0.0);
    amplifierSideBlockPartBig_pos->RegisterYourself();
 
    TGeoTranslation* amplifierSideBlockPartSmall_pos = new TGeoTranslation();
    amplifierSideBlockPartSmall_pos->SetName("amplifierSideBlockPartSmall_pos");
    amplifierSideBlockPartSmall_pos->SetDx(
        +(amplifierSideBlockPartBig_XSize * 0.5 + amplifierSideBlockPartSmall_XSize * 0.5 + 1.72));
    amplifierSideBlockPartSmall_pos->SetDy(+0.05);
    amplifierSideBlockPartSmall_pos->SetDz(0.0);
    amplifierSideBlockPartSmall_pos->RegisterYourself();
 
    TGeoCompositeShape* amplifierSideBlockS = new TGeoCompositeShape();
    amplifierSideBlockS->SetName(TString("amplifierSideBlockS") += TString("_") + frames->GetName());
    {
        TString expression = "amplifierSideBlockPartBigS";
        expression += TString("_") + frames->GetName();
        expression += ":amplifierSideBlockPartBig_pos";
        expression += "+amplifierSideBlockPartSmallS";
        expression += TString("_") + frames->GetName();
        expression += ":amplifierSideBlockPartSmall_pos";
 
        amplifierSideBlockS->MakeNode(expression);
        amplifierSideBlockS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* amplifierSideBlockV =
        new TGeoVolume(TString("amplifierSideBlockV") += TString("_") + frames->GetName(), amplifierSideBlockS);
 
    // volume medium
    TGeoMedium* amplifierSideBlockV_medium = pMedFiberGlass;
    if (amplifierSideBlockV_medium) {
        amplifierSideBlockV->SetMedium(amplifierSideBlockV_medium);
    } else
        Fatal("Main", "Invalid medium for amplifierSideBlockV!");
 
    // volume visual property (transparency)
    amplifierSideBlockV->SetLineColor(TColor::GetColor("#ccffcc"));
    amplifierSideBlockV->SetTransparency(0);
 
    TGeoCombiTrans* amplifierSideBlock_transf[2];
 
    amplifierSideBlock_transf[0] = new TGeoCombiTrans();
    amplifierSideBlock_transf[0]->SetDx(+86.47 /*shift*/);
    amplifierSideBlock_transf[0]->SetDy(-5.5);
    amplifierSideBlock_transf[0]->SetDz(-(amplifierSideBlockPartBig_ZSize * 0.5) + ZModuleSize_Station163x45 * 0.5);
 
    amplifierSideBlock_transf[1] = new TGeoCombiTrans();
    amplifierSideBlock_transf[1]->RotateY(180.0);
    amplifierSideBlock_transf[1]->SetDx(-86.47 /*shift*/);
    amplifierSideBlock_transf[1]->SetDy(-5.5);
    amplifierSideBlock_transf[1]->SetDz(-(amplifierSideBlockPartBig_ZSize * 0.5) + ZModuleSize_Station163x45 * 0.5);
 
    frames->AddNode(amplifierSideBlockV, 0, amplifierSideBlock_transf[0]);
    frames->AddNode(amplifierSideBlockV, 1, amplifierSideBlock_transf[1]);
    //--------------------------------------------------------------------------
 
    // upper PCB (Printed Circuit Board) ----------------------------------------
    Double_t upperPcb_XSize = 177.22;   // cm
    Double_t upperPcb_YSize = 0.3;      // cm
    Double_t upperPcb_ZSize = 4.0;      // cm
 
    TGeoShape* upperPcbS = new TGeoBBox("upperPcbS", upperPcb_XSize * 0.5, upperPcb_YSize * 0.5, upperPcb_ZSize * 0.5);
 
    TGeoVolume* upperPcbV = new TGeoVolume(TString("upperPcbV") += TString("_") + frames->GetName(), upperPcbS);
 
    // volume medium
    TGeoMedium* upperPcbV_medium = pMedFiberGlass;
    if (upperPcbV_medium) {
        upperPcbV->SetMedium(upperPcbV_medium);
    } else
        Fatal("Main", "Invalid medium for upperPcbV!");
 
    // volume visual property (transparency)
    upperPcbV->SetLineColor(TColor::GetColor("#88ff88"));
    upperPcbV->SetTransparency(0);
 
    TGeoCombiTrans* upperPcb_transf[1];
 
    upperPcb_transf[0] = new TGeoCombiTrans();
    upperPcb_transf[0]->SetDx(+0.1 /*shift*/);
    upperPcb_transf[0]->SetDy(+(upperPcb_YSize * 0.5 + 23.5 /*shift*/));
    upperPcb_transf[0]->SetDz(-(upperPcb_ZSize * 0.5) + ZModuleSize_Station163x45 * 0.5 - ZModuleSize_Station163x45
                              - frontSideEpoxideFramePart_ZSize);
 
    frames->AddNode(upperPcbV, 0, upperPcb_transf[0]);
    //--------------------------------------------------------------------------
 
    // side PCB -----------------------------------------------------------------
    Double_t sidePcbPart_XSize = 0.3;     // cm
    Double_t sidePcbPart_YSize = 35.05;   // cm
    Double_t sidePcbPart_ZSize = 4.0;     // cm
 
    TGeoShape* sidePcbPartS = new TGeoBBox(TString("sidePcbPartS") += TString("_") + frames->GetName(),
                                           sidePcbPart_XSize * 0.5, sidePcbPart_YSize * 0.5, sidePcbPart_ZSize * 0.5);
 
    TGeoTranslation* sidePcbPart_pos1 = new TGeoTranslation();
    sidePcbPart_pos1->SetName("sidePcbPart_pos1");
    sidePcbPart_pos1->SetDx(0.0);
    sidePcbPart_pos1->SetDy(0.0);
    sidePcbPart_pos1->SetDz(0.0);
    sidePcbPart_pos1->RegisterYourself();
 
    TGeoTranslation* sidePcbPart_pos2 = new TGeoTranslation();
    sidePcbPart_pos2->SetName("sidePcbPart_pos2");
    sidePcbPart_pos2->SetDx(+(sidePcbPart_XSize + 6.1 /*shift*/));
    sidePcbPart_pos2->SetDy(0.0);
    sidePcbPart_pos2->SetDz(0.0);
    sidePcbPart_pos2->RegisterYourself();
 
    TGeoCompositeShape* sidePcbS = new TGeoCompositeShape();
    sidePcbS->SetName(TString("sidePcbS") += TString("_") + frames->GetName());
    {
        TString expression = "sidePcbPartS";
        expression += TString("_") + frames->GetName();
        expression += ":sidePcbPart_pos1";
        expression += "+sidePcbPartS";
        expression += TString("_") + frames->GetName();
        expression += ":sidePcbPart_pos2";
 
        sidePcbS->MakeNode(expression);
        sidePcbS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* sidePcbV = new TGeoVolume(TString("sidePcbV") += TString("_") + frames->GetName(), sidePcbS);
 
    // volume medium
    TGeoMedium* sidePcbV_medium = pMedFiberGlass;
    if (sidePcbV_medium) {
        sidePcbV->SetMedium(sidePcbV_medium);
    } else
        Fatal("Main", "Invalid medium for sidePcbV!");
 
    // volume visual property (transparency)
    sidePcbV->SetLineColor(TColor::GetColor("#88ff88"));
    sidePcbV->SetTransparency(0);
 
    TGeoCombiTrans* sidePcb_transf[2];
 
    sidePcb_transf[0] = new TGeoCombiTrans();
    sidePcb_transf[0]->SetDx(+(sidePcbPart_XSize * 0.5 + 84.1 /*shift*/));
    sidePcb_transf[0]->SetDy(-6.8 /*shift*/);
    sidePcb_transf[0]->SetDz(-(sidePcbPart_ZSize * 0.5 + alumCableSupportPart_ZSize + ZModuleSize_Station163x45 * 0.5
                               + frontSideEpoxideFramePart_ZSize + 1.0 /*shift*/));
 
    sidePcb_transf[1] = new TGeoCombiTrans();
    sidePcb_transf[1]->RotateY(180.0);
    sidePcb_transf[1]->SetDx(-(sidePcbPart_XSize * 0.5 + 84.1 /*shift*/));
    sidePcb_transf[1]->SetDy(-6.8 /*shift*/);
    sidePcb_transf[1]->SetDz(-(sidePcbPart_ZSize * 0.5 + alumCableSupportPart_ZSize + ZModuleSize_Station163x45 * 0.5
                               + frontSideEpoxideFramePart_ZSize + 1.0 /*shift*/));
 
    frames->AddNode(sidePcbV, 0, sidePcb_transf[0]);
    frames->AddNode(sidePcbV, 1, sidePcb_transf[1]);
    //--------------------------------------------------------------------------
 
    // alum. side support -------------------------------------------------------
    Double_t alumSideSupport_XSize = 4.8;    // cm
    Double_t alumSideSupport_YSize = 52.6;   // cm
    Double_t alumSideSupport_ZSize = 0.4;    // cm
 
    TGeoShape* alumSideSupportS = new TGeoBBox("alumSideSupportS", alumSideSupport_XSize * 0.5,
                                               alumSideSupport_YSize * 0.5, alumSideSupport_ZSize * 0.5);
 
    TGeoVolume* alumSideSupportV =
        new TGeoVolume(TString("alumSideSupportV") += TString("_") + frames->GetName(), alumSideSupportS);
 
    // volume medium
    TGeoMedium* alumSideSupportV_medium = pMedAluminium;
    if (alumSideSupportV_medium) {
        alumSideSupportV->SetMedium(alumSideSupportV_medium);
    } else
        Fatal("Main", "Invalid medium for alumSideSupportV!");
 
    // volume visual property (transparency)
    alumSideSupportV->SetLineColor(TColor::GetColor("#ffcccc"));
    alumSideSupportV->SetTransparency(0);
 
    TGeoCombiTrans* alumSideSupport_transf[2];
 
    alumSideSupport_transf[0] = new TGeoCombiTrans();
    alumSideSupport_transf[0]->SetDx(+(alumSideSupport_XSize * 0.5 + 88.31 /*shift*/));
    alumSideSupport_transf[0]->SetDy(+1.8);
    alumSideSupport_transf[0]->SetDz(+(ZModuleSize_Station163x45 * 0.5 - alumSideSupport_ZSize * 0.5));
 
    alumSideSupport_transf[1] = new TGeoCombiTrans();
    alumSideSupport_transf[1]->SetDx(-(alumSideSupport_XSize * 0.5 + 88.31 /*shift*/));
    alumSideSupport_transf[1]->SetDy(+1.8 /*shift*/);
    alumSideSupport_transf[1]->SetDz(+(ZModuleSize_Station163x45 * 0.5 - alumSideSupport_ZSize * 0.5));
 
    frames->AddNode(alumSideSupportV, 0, alumSideSupport_transf[0]);
    frames->AddNode(alumSideSupportV, 1, alumSideSupport_transf[1]);
    //--------------------------------------------------------------------------
 
    // bosch shape --------------------------------------------------------------
    Double_t boschShape_XSize = 2.25;   // cm
    Double_t boschShape_YSize = 52.6;   // cm
    Double_t boschShape_ZSize = 2.25;   // cm
 
    TGeoShape* boschShapeS =
        new TGeoBBox("boschShapeS", boschShape_XSize * 0.5, boschShape_YSize * 0.5, boschShape_ZSize * 0.5);
 
    TGeoVolume* boschShapeV = new TGeoVolume(TString("boschShapeV") += TString("_") + frames->GetName(), boschShapeS);
 
    // volume medium
    TGeoMedium* boschShapeV_medium = pMedAluminium;
    if (boschShapeV_medium) {
        boschShapeV->SetMedium(boschShapeV_medium);
    } else
        Fatal("Main", "Invalid medium for boschShapeV!");
 
    // volume visual property (transparency)
    boschShapeV->SetLineColor(TColor::GetColor("#ffcccc"));
    boschShapeV->SetTransparency(0);
 
    TGeoCombiTrans* boschShape_transf[2];
 
    boschShape_transf[0] = new TGeoCombiTrans();
    boschShape_transf[0]->SetDx(+(boschShape_XSize * 0.5 + 90.86 /*shift*/));
    boschShape_transf[0]->SetDy(+1.8 /*shift*/);
    boschShape_transf[0]->SetDz(+(ZModuleSize_Station163x45 * 0.5 + boschShape_ZSize * 0.5));
 
    boschShape_transf[1] = new TGeoCombiTrans();
    boschShape_transf[1]->SetDx(-(boschShape_XSize * 0.5 + 90.86 /*shift*/));
    boschShape_transf[1]->SetDy(+1.8 /*shift*/);
    boschShape_transf[1]->SetDz(+(ZModuleSize_Station163x45 * 0.5 + boschShape_ZSize * 0.5));
 
    frames->AddNode(boschShapeV, 0, boschShape_transf[0]);
    frames->AddNode(boschShapeV, 1, boschShape_transf[1]);
    //--------------------------------------------------------------------------
 
    // lower fiberglass block ---------------------------------------------------------
    Double_t lowerFiberGlassBlock_XSize = 165.1;   // cm
    Double_t lowerFiberGlassBlock_YSize = 1.75;    // cm
    Double_t lowerFiberGlassBlock_ZSize = 0.9;     // cm
 
    Double_t lowerFiberGlassBlockArch_Rmin = 4.0;
    Double_t lowerFiberGlassBlockArch_Rmax = 5.75;
    Double_t lowerFiberGlassBlockArch_ZSize = lowerFiberGlassBlock_ZSize;
 
    TGeoShape* lowerFiberGlassBlockHalfS =
        new TGeoBBox(TString("lowerFiberGlassBlockHalfS") += TString("_") + frames->GetName(),
                     (lowerFiberGlassBlock_XSize * 0.5 - lowerFiberGlassBlockArch_Rmin) * 0.5,
                     lowerFiberGlassBlock_YSize * 0.5, lowerFiberGlassBlock_ZSize * 0.5);
    TGeoShape* lowerFiberGlassBlockArchS = new TGeoTubeSeg(
        TString("lowerFiberGlassBlockArchS") += TString("_") + frames->GetName(), lowerFiberGlassBlockArch_Rmin,
        lowerFiberGlassBlockArch_Rmax, lowerFiberGlassBlockArch_ZSize * 0.5, 0.0, 180.0);
 
    TGeoTranslation* lowerFiberGlassBlockHalf_pos1 = new TGeoTranslation();
    lowerFiberGlassBlockHalf_pos1->SetName("lowerFiberGlassBlockHalf_pos1");
    lowerFiberGlassBlockHalf_pos1->SetDx(
        +((lowerFiberGlassBlock_XSize * 0.5 - lowerFiberGlassBlockArch_Rmin) * 0.5 + lowerFiberGlassBlockArch_Rmin));
    lowerFiberGlassBlockHalf_pos1->SetDy(-(lowerFiberGlassBlock_YSize * 0.5));
    lowerFiberGlassBlockHalf_pos1->SetDz(0.0);
    lowerFiberGlassBlockHalf_pos1->RegisterYourself();
 
    TGeoTranslation* lowerFiberGlassBlockHalf_pos2 = new TGeoTranslation();
    lowerFiberGlassBlockHalf_pos2->SetName("lowerFiberGlassBlockHalf_pos2");
    lowerFiberGlassBlockHalf_pos2->SetDx(
        -((lowerFiberGlassBlock_XSize * 0.5 - lowerFiberGlassBlockArch_Rmin) * 0.5 + lowerFiberGlassBlockArch_Rmin));
    lowerFiberGlassBlockHalf_pos2->SetDy(-(lowerFiberGlassBlock_YSize * 0.5));
    lowerFiberGlassBlockHalf_pos2->SetDz(0.0);
    lowerFiberGlassBlockHalf_pos2->RegisterYourself();
 
    TGeoTranslation* lowerFiberGlassBlockArch_pos = new TGeoTranslation();
    lowerFiberGlassBlockArch_pos->SetName("lowerFiberGlassBlockArch_pos");
    lowerFiberGlassBlockArch_pos->SetDx(0.0);
    lowerFiberGlassBlockArch_pos->SetDy(0.0);
    lowerFiberGlassBlockArch_pos->SetDz(0.0);
    lowerFiberGlassBlockArch_pos->RegisterYourself();
 
    TGeoCompositeShape* lowerFiberGlassBlockS = new TGeoCompositeShape();
    lowerFiberGlassBlockS->SetName(TString("lowerFiberGlassBlockS") += TString("_") + frames->GetName());
    {
        TString expression = "lowerFiberGlassBlockHalfS";
        expression += TString("_") + frames->GetName();
        expression += ":lowerFiberGlassBlockHalf_pos1";
        expression += "+lowerFiberGlassBlockHalfS";
        expression += TString("_") + frames->GetName();
        expression += ":lowerFiberGlassBlockHalf_pos2";
        expression += "+lowerFiberGlassBlockArchS";
        expression += TString("_") + frames->GetName();
        expression += ":lowerFiberGlassBlockArch_pos";
 
        lowerFiberGlassBlockS->MakeNode(expression);
        lowerFiberGlassBlockS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoVolume* lowerFiberGlassBlockV =
        new TGeoVolume(TString("lowerFiberGlassBlockV") += TString("_") + frames->GetName(), lowerFiberGlassBlockS);
 
    // volume medium
    TGeoMedium* lowerFiberGlassBlockV_medium = pMedFiberGlass;
    if (lowerFiberGlassBlockV_medium) {
        lowerFiberGlassBlockV->SetMedium(lowerFiberGlassBlockV_medium);
    } else
        Fatal("Main", "Invalid medium for lowerFiberGlassBlockV!");
 
    // volume visual property (transparency)
    lowerFiberGlassBlockV->SetLineColor(TColor::GetColor("#88ff88"));
    lowerFiberGlassBlockV->SetTransparency(0);
 
    TGeoCombiTrans* lowerFiberGlassBlock_transf[1];
 
    lowerFiberGlassBlock_transf[0] = new TGeoCombiTrans();
    lowerFiberGlassBlock_transf[0]->SetDx(0.0);
    lowerFiberGlassBlock_transf[0]->SetDy(-(YModuleSize_Station163x45 * 0.5));
    lowerFiberGlassBlock_transf[0]->SetDz(0.0);
 
    frames->AddNode(lowerFiberGlassBlockV, 0, lowerFiberGlassBlock_transf[0]);
    //--------------------------------------------------------------------------
 
    // side fiberglass block ----------------------------------------------------
    Double_t sideFiberGlassBlockPart_XSize = 1.45;   // cm
    Double_t sideFiberGlassBlockPart_YSize = 49.4;   // cm
    Double_t sideFiberGlassBlockPart_ZSize = 0.89;   // cm
 
    TGeoShape* sideFiberGlassBlockS =
        new TGeoBBox("sideFiberGlassBlockS", sideFiberGlassBlockPart_XSize * 0.5, sideFiberGlassBlockPart_YSize * 0.5,
                     sideFiberGlassBlockPart_ZSize * 0.5);
 
    TGeoVolume* sideFiberGlassBlockV =
        new TGeoVolume(TString("sideFiberGlassBlockV") += TString("_") + frames->GetName(), sideFiberGlassBlockS);
 
    // volume medium
    TGeoMedium* sideFiberGlassBlockV_medium = pMedFiberGlass;
    if (sideFiberGlassBlockV_medium) {
        sideFiberGlassBlockV->SetMedium(sideFiberGlassBlockV_medium);
    } else
        Fatal("Main", "Invalid medium for sideFiberGlassBlockV!");
 
    // volume visual property (transparency)
    sideFiberGlassBlockV->SetLineColor(TColor::GetColor("#88ff88"));
    sideFiberGlassBlockV->SetTransparency(0);
 
    TGeoCombiTrans* sideFiberGlassBlock_transf[2];
 
    sideFiberGlassBlock_transf[0] = new TGeoCombiTrans();
    sideFiberGlassBlock_transf[0]->SetDx(+(lowerFiberGlassBlock_XSize * 0.5 + sideFiberGlassBlockPart_XSize * 0.5));
    sideFiberGlassBlock_transf[0]->SetDy(+0.45 /*shift*/);
    sideFiberGlassBlock_transf[0]->SetDz(+0.005 /*shift for fitting-elements as a plane*/);
 
    sideFiberGlassBlock_transf[1] = new TGeoCombiTrans();
    sideFiberGlassBlock_transf[1]->SetDx(-(lowerFiberGlassBlock_XSize * 0.5 + sideFiberGlassBlockPart_XSize * 0.5));
    sideFiberGlassBlock_transf[1]->SetDy(+0.45 /*shift*/);
    sideFiberGlassBlock_transf[1]->SetDz(+0.005 /*shift for fitting-elements as a plane*/);
 
    frames->AddNode(sideFiberGlassBlockV, 0, sideFiberGlassBlock_transf[0]);
    frames->AddNode(sideFiberGlassBlockV, 1, sideFiberGlassBlock_transf[1]);
    //--------------------------------------------------------------------------
 
    // upper fiberglass block ---------------------------------------------------
    Double_t upperFiberGlassBlock_XSize = 165.1;   // cm
    Double_t upperFiberGlassBlock_YSize = 1.45;    // cm
    Double_t upperFiberGlassBlock_ZSize = 0.89;    // cm
 
    TGeoShape* upperFiberGlassBlockS = new TGeoBBox("upperFiberGlassBlockS", upperFiberGlassBlock_XSize * 0.5,
                                                    upperFiberGlassBlock_YSize * 0.5, upperFiberGlassBlock_ZSize * 0.5);
 
    TGeoVolume* upperFiberGlassBlockV =
        new TGeoVolume(TString("upperFiberGlassBlockV") += TString("_") + frames->GetName(), upperFiberGlassBlockS);
 
    // volume medium
    TGeoMedium* upperFiberGlassBlockV_medium = pMedFiberGlass;
    if (upperFiberGlassBlockV_medium) {
        upperFiberGlassBlockV->SetMedium(upperFiberGlassBlockV_medium);
    } else
        Fatal("Main", "Invalid medium for upperFiberGlassBlockV!");
 
    // volume visual property (transparency)
    upperFiberGlassBlockV->SetLineColor(TColor::GetColor("#88ff88"));
    upperFiberGlassBlockV->SetTransparency(0);
 
    TGeoCombiTrans* upperFiberGlassBlock_transf[1];
 
    upperFiberGlassBlock_transf[0] = new TGeoCombiTrans();
    upperFiberGlassBlock_transf[0]->SetDx(0.0);
    upperFiberGlassBlock_transf[0]->SetDy(
        +(sideFiberGlassBlockPart_YSize * 0.5 - upperFiberGlassBlock_YSize * 0.5 + 0.45 /*shift*/));
    upperFiberGlassBlock_transf[0]->SetDz(+0.005 /*shift for fitting-elements as a plane*/);
 
    frames->AddNode(upperFiberGlassBlockV, 0, upperFiberGlassBlock_transf[0]);
    //--------------------------------------------------------------------------
 
    // brass layer --------------------------------------------------------------
    Double_t upperBrasslayer_XSize = 165.1;   // cm
    Double_t upperBrasslayer_YSize = 1.45;    // cm
    Double_t upperBrasslayer_ZSize = 0.005;   // cm
 
    Double_t sideBrasslayer_XSize = 1.45;    // cm
    Double_t sideBrasslayer_YSize = 49.4;    // cm
    Double_t sideBrasslayer_ZSize = 0.005;   // cm
 
    TGeoShape* upperBrasslayerS = new TGeoBBox("upperBrasslayerS", upperBrasslayer_XSize * 0.5,
                                               upperBrasslayer_YSize * 0.5, upperBrasslayer_ZSize * 0.5);
    TGeoShape* sideBrasslayerS = new TGeoBBox("sideBrasslayerS", sideBrasslayer_XSize * 0.5, sideBrasslayer_YSize * 0.5,
                                              sideBrasslayer_ZSize * 0.5);
 
    TGeoVolume* upperBrasslayerV =
        new TGeoVolume(TString("upperBrasslayerV") += TString("_") + frames->GetName(), upperBrasslayerS);
    TGeoVolume* sideBrasslayerV =
        new TGeoVolume(TString("sideBrasslayerV") += TString("_") + frames->GetName(), sideBrasslayerS);
 
    // volume medium
    TGeoMedium* upperBrasslayerV_medium = pMedBrass;
    if (upperBrasslayerV_medium) {
        upperBrasslayerV->SetMedium(upperBrasslayerV_medium);
        sideBrasslayerV->SetMedium(upperBrasslayerV_medium);
    } else
        Fatal("Main", "Invalid medium for upperBrasslayerV_medium!");
 
    // volume visual property (transparency)
    upperBrasslayerV->SetLineColor(TColor::GetColor("#f07422"));
    upperBrasslayerV->SetTransparency(0);
    sideBrasslayerV->SetLineColor(TColor::GetColor("#f07422"));
    sideBrasslayerV->SetTransparency(0);
 
    TGeoCombiTrans* upperBrasslayer_transf[1];
 
    upperBrasslayer_transf[0] = new TGeoCombiTrans();
    upperBrasslayer_transf[0]->SetDx(0.0);
    upperBrasslayer_transf[0]->SetDy(
        +(sideFiberGlassBlockPart_YSize * 0.5 - upperBrasslayer_YSize * 0.5 + 0.45 /*shift*/));
    upperBrasslayer_transf[0]->SetDz(-ZModuleSize_Station163x45 * 0.5 + upperBrasslayer_ZSize * 0.5 + 0.005 /*shift*/);
 
    TGeoCombiTrans* sideBrasslayer_transf[2];
 
    sideBrasslayer_transf[0] = new TGeoCombiTrans();
    sideBrasslayer_transf[0]->SetDx(+(lowerFiberGlassBlock_XSize * 0.5 + sideBrasslayer_XSize * 0.5));
    sideBrasslayer_transf[0]->SetDy(+0.45 /*shift*/);
    sideBrasslayer_transf[0]->SetDz(-ZModuleSize_Station163x45 * 0.5 + sideBrasslayer_ZSize * 0.5 + 0.005 /*shift*/);
 
    sideBrasslayer_transf[1] = new TGeoCombiTrans();
    sideBrasslayer_transf[1]->SetDx(-(lowerFiberGlassBlock_XSize * 0.5 + sideBrasslayer_XSize * 0.5));
    sideBrasslayer_transf[1]->SetDy(+0.45 /*shift*/);
    sideBrasslayer_transf[1]->SetDz(-ZModuleSize_Station163x45 * 0.5 + sideBrasslayer_ZSize * 0.5 + 0.005 /*shift*/);
 
    frames->AddNode(upperBrasslayerV, 0, upperBrasslayer_transf[0]);
 
    frames->AddNode(sideBrasslayerV, 0, sideBrasslayer_transf[0]);
    frames->AddNode(sideBrasslayerV, 1, sideBrasslayer_transf[1]);
    //--------------------------------------------------------------------------
 
    // steel layer --------------------------------------------------------------
    Double_t upperSteellayer_XSize = 165.1;   // cm
    Double_t upperSteellayer_YSize = 1.45;    // cm
    Double_t upperSteellayer_ZSize = 0.005;   // cm
 
    Double_t sideSteellayer_XSize = 1.45;    // cm
    Double_t sideSteellayer_YSize = 49.4;    // cm
    Double_t sideSteellayer_ZSize = 0.005;   // cm
 
    TGeoShape* upperSteellayerS = new TGeoBBox("upperSteellayerS", upperSteellayer_XSize * 0.5,
                                               upperSteellayer_YSize * 0.5, upperSteellayer_ZSize * 0.5);
    TGeoShape* sideSteellayerS = new TGeoBBox("sideSteellayerS", sideSteellayer_XSize * 0.5, sideSteellayer_YSize * 0.5,
                                              sideSteellayer_ZSize * 0.5);
 
    TGeoVolume* upperSteellayerV =
        new TGeoVolume(TString("upperSteellayerV") += TString("_") + frames->GetName(), upperSteellayerS);
    TGeoVolume* sideSteellayerV =
        new TGeoVolume(TString("sideSteellayerV") += TString("_") + frames->GetName(), sideSteellayerS);
 
    // volume medium
    TGeoMedium* upperSteellayerV_medium = pMedSteel;
    if (upperSteellayerV_medium) {
        upperSteellayerV->SetMedium(upperSteellayerV_medium);
        sideSteellayerV->SetMedium(upperSteellayerV_medium);
    } else
        Fatal("Main", "Invalid medium for upperSteellayerV_medium!");
 
    // volume visual property (transparency)
    upperSteellayerV->SetLineColor(TColor::GetColor("#42aaff"));
    upperSteellayerV->SetTransparency(0);
    sideSteellayerV->SetLineColor(TColor::GetColor("#42aaff"));
    sideSteellayerV->SetTransparency(0);
 
    TGeoCombiTrans* upperSteellayer_transf[1];
 
    upperSteellayer_transf[0] = new TGeoCombiTrans();
    upperSteellayer_transf[0]->SetDx(0.0);
    upperSteellayer_transf[0]->SetDy(
        +(sideFiberGlassBlockPart_YSize * 0.5 - upperSteellayer_YSize * 0.5 + 0.45 /*shift*/));
    upperSteellayer_transf[0]->SetDz(-ZModuleSize_Station163x45 * 0.5 + upperSteellayer_ZSize * 0.5 + 0.005 /*shift*/);
 
    TGeoCombiTrans* sideSteellayer_transf[2];
 
    sideSteellayer_transf[0] = new TGeoCombiTrans();
    sideSteellayer_transf[0]->SetDx(+(lowerFiberGlassBlock_XSize * 0.5 + sideSteellayer_XSize * 0.5));
    sideSteellayer_transf[0]->SetDy(+0.45 /*shift*/);
    sideSteellayer_transf[0]->SetDz(-ZModuleSize_Station163x45 * 0.5 + sideSteellayer_ZSize * 0.5);
 
    sideSteellayer_transf[1] = new TGeoCombiTrans();
    sideSteellayer_transf[1]->SetDx(-(lowerFiberGlassBlock_XSize * 0.5 + sideSteellayer_XSize * 0.5));
    sideSteellayer_transf[1]->SetDy(+0.45 /*shift*/);
    sideSteellayer_transf[1]->SetDz(-ZModuleSize_Station163x45 * 0.5 + sideSteellayer_ZSize * 0.5);
 
    frames->AddNode(upperSteellayerV, 0, upperSteellayer_transf[0]);
 
    frames->AddNode(sideSteellayerV, 0, sideSteellayer_transf[0]);
    frames->AddNode(sideSteellayerV, 1, sideSteellayer_transf[1]);
    //--------------------------------------------------------------------------
 
    return frames;
}