create_rootgeom_GEMS_Run8_aligned.C

Go to the documentation of this file.

/*
 * Baranov D.
 * 25.02.2020 (created)
 * 18.01.2021 (updated)
 * 02.03.2021 (updated): radius of hole in active zone (4.0 -> 6.0 cm)
 * 12.12.2022 (updated): small GEM added
 * Use this macro to create ROOT geometry for the FutureConfig2020 GEM configuration
 *
 */
 
// Set Parameters of GEMS -------------------------------------------------------
const Int_t NStations = 8;     // stations in the detector
const Int_t NMaxModules = 4;   // max. number of modules in a station
 
//(X-Y-Z)Positions of stations (sensitive volumes)
const Double_t XStationPositions[NStations] = {+1.474 /*0*/, +2.614 /*1*/, +3.393 /*2*/, +4.699 /*3*/,
                                               +6.337 /*4*/, +8.189 /*5*/, +9.893 /*6*/, +50.494 /*7*/};
const Double_t YStationPositions[NStations] = {-0.086 /*0*/, -0.107 /*1*/,  +0.003 /*2*/, -0.097 /*3*/,
                                               -0.003 /*4*/, +0.0245 /*5*/, +0.022 /*6*/, -0.186 /*7*/};
const Double_t ZStationPositions[NStations] = {+60.76 /*0*/,   +92.242 /*1*/,  +123.512 /*2*/, +154.692 /*3*/,
                                               +185.989 /*4*/, +217.287 /*5*/, +248.401 /*6*/, +792.532 /*7*/};
 
//(X-Y-Z)Shifts of modules in each station
Double_t XModuleShifts[NStations][NMaxModules] = {
    {163.2 * 0.25, -163.2 * 0.25, 163.2 * 0.25, -163.2 * 0.25},   // st. 0
    {163.2 * 0.25, -163.2 * 0.25, 163.2 * 0.25, -163.2 * 0.25},   // st. 1
    {163.2 * 0.25, -163.2 * 0.25, 163.2 * 0.25, -163.2 * 0.25},   // st. 2
    {163.2 * 0.25, -163.2 * 0.25, 163.2 * 0.25, -163.2 * 0.25},   // st. 3
    {163.2 * 0.25, -163.2 * 0.25, 163.2 * 0.25, -163.2 * 0.25},   // st. 4
    {163.2 * 0.25, -163.2 * 0.25, 163.2 * 0.25, -163.2 * 0.25},   // st. 5
    {163.2 * 0.25, -163.2 * 0.25, 163.2 * 0.25, -163.2 * 0.25},   // st. 6
    {0.0}                                                         // st. 7
};
Double_t YModuleShifts[NStations][NMaxModules] = {
    {+22.5, +22.5, -19.5, -19.5},   // st. 0
    {+22.5, +22.5, -19.5, -19.5},   // st. 1
    {+22.5, +22.5, -19.5, -19.5},   // st. 2
    {+22.5, +22.5, -19.5, -19.5},   // st. 3
    {+22.5, +22.5, -19.5, -19.5},   // st. 4
    {+22.5, +22.5, -19.5, -19.5},   // st. 5
    {+22.5, +22.5, -19.5, -19.5},   // st. 6
    {0.0}                           // st. 7
};
Double_t ZModuleShifts[NStations][NMaxModules] = {
    {+4.1, +4.1, 0.0, 0.0},   // st. 0
    {0.0, 0.0, +4.1, +4.1},   // st. 1
    {+4.1, +4.1, 0.0, 0.0},   // st. 2
    {0.0, 0.0, +4.1, +4.1},   // st. 3
    {+4.1, +4.1, 0.0, 0.0},   // st. 4
    {0.0, 0.0, +4.1, +4.1},   // st. 5
    {+4.1, +4.1, 0.0, 0.0},   // st. 6
    {0.0}                     // st. 7
};
 
// alignment corrections --------------------------------------------------------
const Double_t StsDX[NStations][8] = {
    {2.28613e-01, 2.34606e-01, 3.70449e-01, 4.39267e-01, 2.67664e-01, 2.84859e-01, 3.41005e-01, 4.16753e-01},
    {3.17030e-01, 2.45618e-01, 4.29878e-01, 4.29169e-01, 2.60443e-01, 1.79925e-01, 3.76252e-01, 3.71674e-01},
    {1.25543e-01, 1.37935e-01, 2.77096e-01, 3.51704e-01, 2.16012e-01, 2.12139e-01, 2.88912e-01, 3.57699e-01},
    {3.17647e-01, 2.36295e-01, 3.75431e-01, 3.80575e-01, 1.68884e-01, 8.80524e-02, 2.51805e-01, 2.56513e-01},
    {-3.01883e-02, -2.87880e-02, 1.09744e-01, 1.90429e-01, 1.78162e-02, 1.32671e-02, 9.23760e-02, 1.67779e-01},
    {1.43966e-01, 5.53303e-02, 2.48555e-01, 2.49193e-01, 3.88544e-02, -3.31393e-02, 7.96085e-02, 7.41273e-02},
    {0., -5.63645e-04, 0.05, 8.74027e-04, 0., 3.60763e-03, 0.074, 1.49797e-01}};
const Double_t StsDY[NStations][8] = {
    {-2.40830e-01, -2.27117e-01, -4.41393e-01, -2.98662e-01, -1.47376e-01, -5.64919e-01, 3.60250e-02, -2.15290e-01},
    {-4.83443e-01, -3.63780e-01, -3.52015e-01, -3.36903e-01, -1.14008e-01, -3.49136e-01, -2.14579e-01, -6.23524e-01},
    {-1.91062e-01, -2.04515e-01, -3.79972e-01, -2.57092e-01, -1.01400e-01, -5.18137e-01, 5.39497e-02, -1.85679e-01},
    {-4.55871e-01, -3.48696e-01, -2.33191e-01, -2.40044e-01, -5.37329e-02, -3.00596e-01, -1.98740e-01, -6.04983e-01},
    {-2.31062e-01, -2.58276e-01, -4.03759e-01, -2.70196e-01, -8.53213e-02, -5.14891e-01, 3.15495e-02, -2.08464e-01},
    {-2.58821e-01, -1.58621e-01, -9.84743e-02, -1.05756e-01, 1.54258e-01, -1.04935e-01, 1.83280e-02, -3.86622e-01},
    {0., -5.86937e-03, -0.23, -1.45342e-01, 0., -3.98117e-01, 0.15, -1.04839e-01}};
 
const Double_t XAlignmentCorrections[NStations][NMaxModules] = {
    {StsDX[0][0], StsDX[0][2], StsDX[0][4], StsDX[0][6]},   // st. 0
    {StsDX[1][0], StsDX[1][2], StsDX[1][4], StsDX[1][6]},   // st. 1
    {StsDX[2][0], StsDX[2][2], StsDX[2][4], StsDX[2][6]},   // st. 2
    {StsDX[3][0], StsDX[3][2], StsDX[3][4], StsDX[3][6]},   // st. 3
    {StsDX[4][0], StsDX[4][2], StsDX[4][4], StsDX[4][6]},   // st. 4
    {StsDX[5][0], StsDX[5][2], StsDX[5][4], StsDX[5][6]},   // st. 5
    {StsDX[6][0], StsDX[6][2], StsDX[6][4], StsDX[6][6]},   // st. 6
    {0.0}                                                   // st. 7
};
 
const Double_t YAlignmentCorrections[NStations][NMaxModules] = {
    {StsDY[0][0], StsDY[0][2], StsDY[0][4], StsDY[0][6]},   // st. 0
    {StsDY[1][0], StsDY[1][2], StsDY[1][4], StsDY[1][6]},   // st. 1
    {StsDY[2][0], StsDY[2][2], StsDY[2][4], StsDY[2][6]},   // st. 2
    {StsDY[3][0], StsDY[3][2], StsDY[3][4], StsDY[3][6]},   // st. 3
    {StsDY[4][0], StsDY[4][2], StsDY[4][4], StsDY[4][6]},   // st. 4
    {StsDY[5][0], StsDY[5][2], StsDY[5][4], StsDY[5][6]},   // st. 5
    {StsDY[6][0], StsDY[6][2], StsDY[6][4], StsDY[6][6]},   // st. 6
    {0.0}                                                   // st. 7
};
 
const Double_t ZAlignmentCorrections[NStations][NMaxModules] = {
    {0.243654, 0.250775, 0.173749, 0.161366},           // st. 0
    {-0.143876, -0.150758, 0.109959, 0.156433},         // st. 1
    {-0.110145, -0.165981, -0.213889, -0.229543},       // st. 2
    {0.103517, 0.036342, 0.086135, 0.0941369},          // st. 3
    {-0.037648, -0.0941807, -0.180758, -0.176327},      // st. 4
    {-0.0674491, -0.0367844, -0.0972473, -0.0584354},   // st. 5
    {0, 0, 0, 0},                                       // st. 6
    {0.0}                                               // st. 7
};
//------------------------------------------------------------------------------
 
// GEM plane sizes (66x41 type) -------------------------------------------------
const Double_t XModuleSize_Station66x41 = 66.0;
const Double_t YModuleSize_Station66x41 = 41.0;
const Double_t ZModuleSize_Station66x41 = 0.9;
 
const Double_t dXFrame_Station66x41 = 2.0;
const Double_t dYFrame_Station66x41 = 2.0;
const Double_t dZFrame_Station66x41 = 4.1;
//------------------------------------------------------------------------------
 
// GEM plane sizes (163x45 type) ------------------------------------------------
const Double_t XModuleSize_Station163x45 = 163.2 * 0.5;   // 81.6
const Double_t YModuleSize_Station163x45 = 45.0;
const Double_t ZModuleSize_Station163x45 = 0.9;
 
const Double_t dXFrame_Station163x45 = 2.0;
const Double_t dYFrame_Station163x45 = 2.0;
const Double_t dZFrame_Station163x45 = 4.1;
//------------------------------------------------------------------------------
 
// GEM plane sizes (163x39 type) ------------------------------------------------
const Double_t XModuleSize_Station163x39 = 163.2 * 0.5;   // 81.6
const Double_t YModuleSize_Station163x39 = 39.0;
const Double_t ZModuleSize_Station163x39 = 0.9;   // sensitive volume
const Double_t ZGEMSize_Station163x39 = 4.1;      // common thickness of GEM (including sens. vol)
 
const Double_t dXFrame_Station163x39 = 2.0;
const Double_t dYFrame_Station163x39 = 2.0;
const Double_t dZFrame_Station163x39 = 4.1;
//------------------------------------------------------------------------------
 
// GEM plane sizes (10x10 type) -------------------------------------------------
const Double_t XModuleSize_Station10x10 = 10.0;   // 81.6
const Double_t YModuleSize_Station10x10 = 10.0;
const Double_t ZModuleSize_Station10x10 = 0.9;   // sensitive volume
const Double_t ZGEMSize_Station10x10 = 4.1;      // common thickness of GEM (including sens. vol)
 
const Double_t dXFrame_Station10x10 = 2.0;
const Double_t dYFrame_Station10x10 = 2.0;
const Double_t dZFrame_Station10x10 = 4.1;
//------------------------------------------------------------------------------
 
// GeoManager
TGeoManager* gGeoMan = NULL;
 
// media
TGeoMedium* pMedAir = 0;
TGeoMedium* pMedCarbon = 0;
TGeoMedium* pMedFiberGlass = 0;
TGeoMedium* pMedCopper = 0;
TGeoMedium* pMedArCO27030 = 0;
TGeoMedium* pMedArC4H10_80_20 = 0;
 
class FairGeoMedia;
class FairGeoBuilder;
 
TGeoVolume* CreateStation(TString station_name);
 
TGeoVolume* CreateModule_Station66x41(TString module_name, Double_t xsize, Double_t ysize, Double_t zsize);
TGeoVolume* CreateFrameForModule_Station66x41(TString frame_name, Double_t dx, Double_t dy, Double_t dz);
 
TGeoVolume* CreateModule_Station163x45(TString module_name,
                                       Double_t xsize,
                                       Double_t ysize,
                                       Double_t zsize,
                                       Double_t hole_radius);
TGeoVolume* CreateFrameForModule_Station163x45(TString frame_name,
                                               Double_t dx,
                                               Double_t dy,
                                               Double_t dz,
                                               Double_t hole_radius);
 
TGeoVolume* CreateModule_Station163x39(TString module_name,
                                       Double_t xsize,
                                       Double_t ysize,
                                       Double_t zsize,
                                       Double_t hole_radius);
TGeoVolume* CreateFrameForModule_Station163x39(TString frame_name,
                                               Double_t dx,
                                               Double_t dy,
                                               Double_t dz,
                                               Double_t hole_radius);
 
TGeoVolume* CreateModule_Station10x10(TString module_name, Double_t xsize, Double_t ysize, Double_t zsize);
 
void DefineRequiredMedia(FairGeoMedia* geoMedia, FairGeoBuilder* geoBuild)
{
 
    // air medium
    FairGeoMedium* mAir = geoMedia->getMedium("air");
    if (!mAir)
        Fatal("Main", "FairMedium air not found");
    geoBuild->createMedium(mAir);
    pMedAir = gGeoManager->GetMedium("air");
    if (!pMedAir)
        Fatal("Main", "Medium air not found");
 
    // carbon medium
    FairGeoMedium* mCarbon = geoMedia->getMedium("carbon");
    if (!mCarbon)
        Fatal("Main", "FairMedium carbon not found");
    geoBuild->createMedium(mCarbon);
    pMedCarbon = gGeoManager->GetMedium("carbon");
    if (!pMedCarbon)
        Fatal("Main", "Medium carbon not found");
 
    // fiberglass medium
    FairGeoMedium* mFiberGlass = geoMedia->getMedium("fiberglass");
    if (!mFiberGlass)
        Fatal("Main", "FairMedium fiberglass not found");
    geoBuild->createMedium(mFiberGlass);
    pMedFiberGlass = gGeoManager->GetMedium("fiberglass");
    if (!pMedFiberGlass)
        Fatal("Main", "Medium fiberglass not found");
 
    // arco27020 medium
    FairGeoMedium* mArCO27030 = geoMedia->getMedium("arco27030");
    if (!mArCO27030)
        Fatal("Main", "FairMedium arco27030 not found");
    geoBuild->createMedium(mArCO27030);
    pMedArCO27030 = gGeoManager->GetMedium("arco27030");
    if (!pMedArCO27030)
        Fatal("Main", "Medium arco27030 not found");
 
    // ArC4H10_80_20 medium
    FairGeoMedium* mArC4H10_80_20 = geoMedia->getMedium("ArC4H10_80_20");
    if (!mArC4H10_80_20)
        Fatal("Main", "FairMedium ArC4H10_80_20 not found");
    geoBuild->createMedium(mArC4H10_80_20);
    pMedArC4H10_80_20 = gGeoManager->GetMedium("ArC4H10_80_20");
    if (!pMedArC4H10_80_20)
        Fatal("Main", "Medium ArC4H10_80_20 not found");
}
 
void create_rootgeom_GEMS_Run8_aligned()
{
 
    // ----  set working directory  --------------------------------------------
    TString gPath = gSystem->Getenv("VMCWORKDIR");
 
    // -------   Geometry file name (output)   ---------------------------------
    const TString geoDetectorName = "GEMS";
    const TString geoDetectorVersion = "Run8_aligned";
    const TString geoFileName = gPath + "/geometry/" + geoDetectorName + "_" + geoDetectorVersion + ".root";
 
    // ----  global geometry parameters  ---------------------------------------
    FairGeoLoader* geoLoad = new FairGeoLoader("TGeo", "FairGeoLoader");
    FairGeoInterface* geoFace = geoLoad->getGeoInterface();
 
    // -------   Load media from media file   ----------------------------------
    TString medFile = gPath + "/geometry/media.geo";
    geoFace->setMediaFile(medFile);
    geoFace->readMedia();
    FairGeoMedia* geoMedia = geoFace->getMedia();
    FairGeoBuilder* geoBuild = geoLoad->getGeoBuilder();
 
    DefineRequiredMedia(geoMedia, geoBuild);
    // -------------------------------------------------------------------------
 
    // --------------   Create geometry and top volume  ------------------------
    gGeoMan = (TGeoManager*)gROOT->FindObject("FAIRGeom");
    gGeoMan->SetName(geoDetectorName + "_geom");
    TGeoVolume* top = new TGeoVolumeAssembly("TOP");
    top->SetMedium(pMedAir);
    gGeoMan->SetTopVolume(top);
    // gGeoMan->SetTopVisible(1);
    //  -------------------------------------------------------------------------
 
    // Define TOP Geometry
    TGeoVolume* GEMS = new TGeoVolumeAssembly(geoDetectorName);
    GEMS->SetMedium(pMedAir);
 
    for (Int_t istation = 0; istation < NStations; ++istation) {
 
        Int_t stationNum = istation;
        TGeoVolume* station = CreateStation(TString("station") + TString::Itoa(stationNum, 10));
 
        // Applying alignment corrections to module shifts !!!!!!!!!!
        for (Int_t imodule = 0; imodule < NMaxModules; ++imodule) {
            XModuleShifts[istation][imodule] -= XAlignmentCorrections[istation][imodule];
            YModuleShifts[istation][imodule] -= YAlignmentCorrections[istation][imodule];
            ZModuleShifts[istation][imodule] += ZAlignmentCorrections[istation][imodule];
        }
 
        if (istation < 7) {   // big GEMs
 
            // upper part
            TGeoVolume* module0 =
                CreateModule_Station163x45(TString("Sensor_module0_") + station->GetName(), XModuleSize_Station163x45,
                                           YModuleSize_Station163x45, ZModuleSize_Station163x45, 4.0 + 2.0);
            TGeoVolume* module1 =
                CreateModule_Station163x45(TString("Sensor_module1_") + station->GetName(), XModuleSize_Station163x45,
                                           YModuleSize_Station163x45, ZModuleSize_Station163x45, 4.0 + 2.0);
            TGeoVolume* frame0 =
                CreateFrameForModule_Station163x45(TString("frame0_") + station->GetName(), dXFrame_Station163x45,
                                                   dYFrame_Station163x45, dZFrame_Station163x45, 4.0 + 2.0);
            TGeoVolume* frame1 =
                CreateFrameForModule_Station163x45(TString("frame1_") + station->GetName(), dXFrame_Station163x45,
                                                   dYFrame_Station163x45, dZFrame_Station163x45, 4.0 + 2.0);
 
            // lower part
            TGeoVolume* module2 =
                CreateModule_Station163x39(TString("Sensor_module2_") + station->GetName(), XModuleSize_Station163x39,
                                           YModuleSize_Station163x39, ZModuleSize_Station163x39, 4.0 + 2.0);
            TGeoVolume* module3 =
                CreateModule_Station163x39(TString("Sensor_module3_") + station->GetName(), XModuleSize_Station163x39,
                                           YModuleSize_Station163x39, ZModuleSize_Station163x39, 4.0 + 2.0);
            TGeoVolume* frame2 =
                CreateFrameForModule_Station163x39(TString("frame2_") + station->GetName(), dXFrame_Station163x39,
                                                   dYFrame_Station163x39, dZFrame_Station163x39, 4.0 + 2.0);
            TGeoVolume* frame3 =
                CreateFrameForModule_Station163x39(TString("frame3_") + station->GetName(), dXFrame_Station163x39,
                                                   dYFrame_Station163x39, dZFrame_Station163x39, 4.0 + 2.0);
 
            TGeoCombiTrans* module0_transform = new TGeoCombiTrans();
            module0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                              ZModuleShifts[stationNum][0] + ZModuleSize_Station163x45 * 0.5);
 
            TGeoCombiTrans* module1_transform = new TGeoCombiTrans();
            module1_transform->ReflectX(true);
            module1_transform->SetTranslation(XModuleShifts[stationNum][1], YModuleShifts[stationNum][1],
                                              ZModuleShifts[stationNum][1] + ZModuleSize_Station163x45 * 0.5);
 
            TGeoCombiTrans* module2_transform = new TGeoCombiTrans();
            module2_transform->ReflectY(true);
            module2_transform->SetTranslation(XModuleShifts[stationNum][2], YModuleShifts[stationNum][2],
                                              ZModuleShifts[stationNum][2] + ZModuleSize_Station163x45 * 0.5);
 
            TGeoCombiTrans* module3_transform = new TGeoCombiTrans();
            module3_transform->ReflectY(true);
            module3_transform->ReflectX(true);
            module3_transform->SetTranslation(XModuleShifts[stationNum][3], YModuleShifts[stationNum][3],
                                              ZModuleShifts[stationNum][3] + ZModuleSize_Station163x45 * 0.5);
 
            TGeoCombiTrans* station_transform = new TGeoCombiTrans();
            station_transform->SetTranslation(XStationPositions[stationNum], YStationPositions[stationNum],
                                              ZStationPositions[stationNum]);
 
            station->AddNode(module0, 0, new TGeoCombiTrans(*module0_transform));   // module
            station->AddNode(module1, 0, new TGeoCombiTrans(*module1_transform));   // module
            station->AddNode(module2, 0, new TGeoCombiTrans(*module2_transform));   // module
            station->AddNode(module3, 0, new TGeoCombiTrans(*module3_transform));   // module
 
            // station->AddNode(frame0, 0, new TGeoCombiTrans(*module0_transform)); //frame
            // station->AddNode(frame1, 0, new TGeoCombiTrans(*module1_transform)); //frame
            // station->AddNode(frame2, 0, new TGeoCombiTrans(*module2_transform)); //frame
            // station->AddNode(frame3, 0, new TGeoCombiTrans(*module3_transform)); //frame
        }
 
        if (istation == 7) {   // small GEM
            TGeoVolume* module0 =
                CreateModule_Station10x10(TString("Sensor_module0_") + station->GetName(), XModuleSize_Station10x10,
                                          YModuleSize_Station10x10, ZModuleSize_Station10x10);
 
            TGeoCombiTrans* module0_transform = new TGeoCombiTrans();
            module0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                              ZModuleShifts[stationNum][0] + ZModuleSize_Station10x10 * 0.5);
 
            station->AddNode(module0, 0, new TGeoCombiTrans(*module0_transform));   // module
        }
 
        TGeoCombiTrans* station_transform = new TGeoCombiTrans();
        station_transform->SetTranslation(XStationPositions[stationNum], YStationPositions[stationNum],
                                          ZStationPositions[stationNum]);
 
        GEMS->AddNode(station, 0, station_transform);
    }
 
    top->AddNode(GEMS, 0);
    top->SetVisContainers(kTRUE);
 
    // ---------------   Finish   -----------------------------------------------
    gGeoMan->CloseGeometry();
    gGeoMan->CheckOverlaps(0.0001);
    gGeoMan->PrintOverlaps();
    gGeoMan->Test();
    // gGeoMan->RestoreMasterVolume();
 
    TFile* geoFile = new TFile(geoFileName, "RECREATE");
    top->Write();
    geoFile->Close();
    top->Draw("ogl");
}
 
//------------------------------------------------------------------------------
 
TGeoVolume* CreateStation(TString station_name)
{
 
    TGeoVolume* stationA = new TGeoVolumeAssembly(station_name);
    stationA->SetMedium(pMedAir);
 
    return stationA;
}
 
TGeoVolume* CreateModule_Station66x41(TString module_name, Double_t xsize, Double_t ysize, Double_t zsize)
{
 
    // module shape
    TGeoShape* moduleS = new TGeoBBox("moduleS", xsize * 0.5, ysize * 0.5, zsize * 0.5);
 
    // module volume
    TGeoVolume* moduleV = new TGeoVolume(module_name, moduleS);
 
    // medium
    if (pMedArC4H10_80_20)
        moduleV->SetMedium(pMedArC4H10_80_20);
    else
        Fatal("Main", "Invalid medium for sensitive modules!");
 
    // visual parameters
    moduleV->SetLineColor(TColor::GetColor("#ff47ca"));
    moduleV->SetTransparency(20);
 
    return moduleV;
}
 
TGeoVolume* CreateFrameForModule_Station66x41(TString frame_name, Double_t dx, Double_t dy, Double_t dz)
{
 
    // frame shapes
    TGeoShape* vertical_frameS =
        new TGeoBBox("vertical_frameS", dx * 0.5, YModuleSize_Station66x41 * 0.5 + dy, dz * 0.5);
    TGeoShape* horizontal_frameS =
        new TGeoBBox("horizontal_frameS", XModuleSize_Station66x41 * 0.5, dy * 0.5, dz * 0.5);
 
    // frame volumes
    TGeoVolume* composite_frameV = new TGeoVolumeAssembly(frame_name);
    TGeoVolume* vertical_frameV = new TGeoVolume(frame_name + "_vertical_frameV", vertical_frameS);
    TGeoVolume* horizontal_frameV = new TGeoVolume(frame_name + "_horizontal_frameV", horizontal_frameS);
 
    // media
    TGeoMedium* frame_medium = pMedCarbon;   // set medium
    if (pMedCarbon) {
        vertical_frameV->SetMedium(frame_medium);
        horizontal_frameV->SetMedium(frame_medium);
    } else
        Fatal("Main", "Invalid medium for frames!");
    if (pMedAir) {
        composite_frameV->SetMedium(pMedAir);
    } else
        Fatal("Main", "Invalid medium for frames!");
 
    // visual parameters
    vertical_frameV->SetLineColor(TColor::GetColor("#9999ff"));
    horizontal_frameV->SetLineColor(TColor::GetColor("#9999ff"));
 
    // frame part positions in the frame
    TGeoCombiTrans* left_vertical_frame_position = new TGeoCombiTrans();
    left_vertical_frame_position->SetTranslation(XModuleSize_Station66x41 * 0.5 + dXFrame_Station66x41 * 0.5, 0.0, 0.0);
 
    TGeoCombiTrans* right_vertical_frame_position = new TGeoCombiTrans();
    right_vertical_frame_position->SetTranslation(-XModuleSize_Station66x41 * 0.5 - dXFrame_Station66x41 * 0.5, 0.0,
                                                  0.0);
 
    TGeoCombiTrans* bottom_horizontal_frame_position = new TGeoCombiTrans();
    bottom_horizontal_frame_position->SetTranslation(0.0, YModuleSize_Station66x41 * 0.5 + dYFrame_Station66x41 * 0.5,
                                                     0.0);
 
    TGeoCombiTrans* lower_horizontal_frame_position = new TGeoCombiTrans();
    lower_horizontal_frame_position->SetTranslation(0.0, -YModuleSize_Station66x41 * 0.5 - dYFrame_Station66x41 * 0.5,
                                                    0.0);
 
    composite_frameV->AddNode(vertical_frameV, 0, left_vertical_frame_position);
    composite_frameV->AddNode(vertical_frameV, 1, right_vertical_frame_position);
    composite_frameV->AddNode(horizontal_frameV, 0, bottom_horizontal_frame_position);
    composite_frameV->AddNode(horizontal_frameV, 1, lower_horizontal_frame_position);
 
    return composite_frameV;
}
 
TGeoVolume* CreateModule_Station163x45(TString module_name,
                                       Double_t xsize,
                                       Double_t ysize,
                                       Double_t zsize,
                                       Double_t hole_radius)
{
 
    gRandom->SetSeed(0);
    Int_t uniqueId = gRandom->Integer(100000);
 
    // module shapes
    TGeoShape* module_partS =
        new TGeoBBox(TString("module_partS") + TString::Itoa(uniqueId, 10), xsize * 0.5, ysize * 0.5, zsize * 0.5);
    TGeoShape* holeS =
        new TGeoTube(TString("holeS") + TString::Itoa(uniqueId, 10), 0.0, hole_radius, zsize * 0.5 + 0.01);
 
    TGeoTranslation* hole_module_trans = new TGeoTranslation(
        TString("hole_module_trans_") + TString::Itoa(uniqueId, 10), -xsize * 0.5, -ysize * 0.5, 0.0);
 
    hole_module_trans->RegisterYourself();
 
    TString bool_expression_module = TString(module_partS->GetName()) + TString(" - ") + TString(holeS->GetName())
                                     + TString(":") + TString(hole_module_trans->GetName());
    TGeoCompositeShape* moduleS = new TGeoCompositeShape(bool_expression_module);
 
    // module volume
    TGeoVolume* moduleV = new TGeoVolume(module_name, moduleS);
 
    // medium
    if (pMedArC4H10_80_20)
        moduleV->SetMedium(pMedArC4H10_80_20);
    else
        Fatal("Main", "Invalid medium for sensitive modules!");
 
    // visual parameters
    moduleV->SetLineColor(TColor::GetColor("#ff47ca"));
    moduleV->SetTransparency(20);
 
    return moduleV;
}
//------------------------------------------------------------------------------
 
TGeoVolume* CreateFrameForModule_Station163x45(TString frame_name,
                                               Double_t dx,
                                               Double_t dy,
                                               Double_t dz,
                                               Double_t hole_radius)
{
 
    // frame shapes
    TGeoShape* vertical_frameS =
        new TGeoBBox("vertical_frameS", dx * 0.5, YModuleSize_Station163x45 * 0.5 + dy, dz * 0.5);
    TGeoShape* horizontal_upper_frameS =
        new TGeoBBox("horizontal_upper_frameS", XModuleSize_Station163x45 * 0.5, dy * 0.5, dz * 0.5);
    TGeoShape* horizontal_bottom_frameS = new TGeoBBox(
        "horizontal_upper_frameS", XModuleSize_Station163x45 * 0.5 - hole_radius * 0.5, dy * 0.5, dz * 0.5);
 
    // frame volumes
    TGeoVolume* composite_frameV = new TGeoVolumeAssembly(frame_name);
    TGeoVolume* vertical_frameV = new TGeoVolume(frame_name + "_vertical_frameV", vertical_frameS);
    TGeoVolume* horizontal_upper_frameV =
        new TGeoVolume(frame_name + "_horizontal_upper_frameV", horizontal_upper_frameS);
    TGeoVolume* horizontal_bottom_frameV =
        new TGeoVolume(frame_name + "_horizontal_bottom_frameV", horizontal_bottom_frameS);
 
    // media
    TGeoMedium* frame_medium = pMedCarbon;   // set medium
    if (pMedCarbon) {
        vertical_frameV->SetMedium(frame_medium);
        horizontal_upper_frameV->SetMedium(frame_medium);
        horizontal_bottom_frameV->SetMedium(frame_medium);
    } else
        Fatal("Main", "Invalid medium for frames!");
    if (pMedAir) {
        composite_frameV->SetMedium(pMedAir);
    } else
        Fatal("Main", "Invalid medium for frames!");
 
    // visual parameters
    vertical_frameV->SetLineColor(TColor::GetColor("#9999ff"));
    horizontal_upper_frameV->SetLineColor(TColor::GetColor("#9999ff"));
    horizontal_bottom_frameV->SetLineColor(TColor::GetColor("#9999ff"));
 
    // frame part positions in the frame
    TGeoCombiTrans* left_vertical_frame_position = new TGeoCombiTrans();
    left_vertical_frame_position->SetTranslation(XModuleSize_Station163x45 * 0.5 + dXFrame_Station163x45 * 0.5, 0.0,
                                                 0.0);
 
    TGeoCombiTrans* upper_horizontal_frame_position = new TGeoCombiTrans();
    upper_horizontal_frame_position->SetTranslation(0.0, YModuleSize_Station163x45 * 0.5 + dYFrame_Station163x45 * 0.5,
                                                    0.0);
 
    TGeoCombiTrans* bottom_horizontal_frame_position = new TGeoCombiTrans();
    bottom_horizontal_frame_position->SetTranslation(
        hole_radius * 0.5, -YModuleSize_Station163x45 * 0.5 - dYFrame_Station163x45 * 0.5, 0.0);
 
    composite_frameV->AddNode(vertical_frameV, 0, left_vertical_frame_position);
    composite_frameV->AddNode(horizontal_upper_frameV, 0, upper_horizontal_frame_position);
    composite_frameV->AddNode(horizontal_bottom_frameV, 0, bottom_horizontal_frame_position);
 
    return composite_frameV;
}
//------------------------------------------------------------------------------
 
TGeoVolume* CreateModule_Station163x39(TString module_name,
                                       Double_t xsize,
                                       Double_t ysize,
                                       Double_t zsize,
                                       Double_t hole_radius)
{
 
    return CreateModule_Station163x45(module_name, xsize, ysize, zsize, hole_radius);
}
//------------------------------------------------------------------------------
 
TGeoVolume* CreateFrameForModule_Station163x39(TString frame_name,
                                               Double_t dx,
                                               Double_t dy,
                                               Double_t dz,
                                               Double_t hole_radius)
{
 
    // frame shapes
    TGeoShape* vertical_frameS = new TGeoBBox(TString("vertical_frameS") += TString("_") + frame_name, dx * 0.5,
                                              YModuleSize_Station163x39 * 0.5 + dy, dz * 0.5);
    TGeoShape* horizontal_upper_frameS = new TGeoBBox(TString("horizontal_upper_frameS") += TString("_") + frame_name,
                                                      XModuleSize_Station163x39 * 0.5, dy * 0.5, dz * 0.5);
    TGeoShape* horizontal_bottom_frameS =
        new TGeoBBox(TString("horizontal_upper_frameS") += TString("_") + frame_name,
                     XModuleSize_Station163x39 * 0.5 - hole_radius * 0.5, dy * 0.5, dz * 0.5);
 
    // frame volumes
    TGeoVolume* composite_frameV = new TGeoVolumeAssembly(frame_name);
    TGeoVolume* vertical_frameV = new TGeoVolume(frame_name + "_vertical_frameV", vertical_frameS);
    TGeoVolume* horizontal_upper_frameV =
        new TGeoVolume(frame_name + "_horizontal_upper_frameV", horizontal_upper_frameS);
    TGeoVolume* horizontal_bottom_frameV =
        new TGeoVolume(frame_name + "_horizontal_bottom_frameV", horizontal_bottom_frameS);
 
    // media
    TGeoMedium* frame_medium = pMedCarbon;   // set medium
    if (pMedCarbon) {
        vertical_frameV->SetMedium(frame_medium);
        horizontal_upper_frameV->SetMedium(frame_medium);
        horizontal_bottom_frameV->SetMedium(frame_medium);
    } else
        Fatal("Main", "Invalid medium for frames!");
    if (pMedAir) {
        composite_frameV->SetMedium(pMedAir);
    } else
        Fatal("Main", "Invalid medium for frames!");
 
    // visual parameters
    vertical_frameV->SetLineColor(TColor::GetColor("#9999ff"));
    horizontal_upper_frameV->SetLineColor(TColor::GetColor("#9999ff"));
    horizontal_bottom_frameV->SetLineColor(TColor::GetColor("#9999ff"));
 
    // frame part positions in the frame
    TGeoCombiTrans* left_vertical_frame_position = new TGeoCombiTrans();
    left_vertical_frame_position->SetTranslation(XModuleSize_Station163x39 * 0.5 + dXFrame_Station163x39 * 0.5, 0.0,
                                                 0.0);
 
    TGeoCombiTrans* upper_horizontal_frame_position = new TGeoCombiTrans();
    upper_horizontal_frame_position->SetTranslation(0.0, YModuleSize_Station163x39 * 0.5 + dYFrame_Station163x39 * 0.5,
                                                    0.0);
 
    TGeoCombiTrans* bottom_horizontal_frame_position = new TGeoCombiTrans();
    bottom_horizontal_frame_position->SetTranslation(
        hole_radius * 0.5, -YModuleSize_Station163x39 * 0.5 - dYFrame_Station163x39 * 0.5, 0.0);
 
    composite_frameV->AddNode(vertical_frameV, 0, left_vertical_frame_position);
    composite_frameV->AddNode(horizontal_upper_frameV, 0, upper_horizontal_frame_position);
    composite_frameV->AddNode(horizontal_bottom_frameV, 0, bottom_horizontal_frame_position);
 
    return composite_frameV;
}
//------------------------------------------------------------------------------
 
TGeoVolume* CreateModule_Station10x10(TString module_name, Double_t xsize, Double_t ysize, Double_t zsize)
{
 
    // module shape
    TGeoShape* moduleS = new TGeoBBox("moduleS", xsize * 0.5, ysize * 0.5, zsize * 0.5);
 
    // module volume
    TGeoVolume* moduleV = new TGeoVolume(module_name, moduleS);
 
    // medium
    if (pMedArC4H10_80_20)
        moduleV->SetMedium(pMedArC4H10_80_20);
    else
        Fatal("Main", "Invalid medium for sensitive modules!");
 
    // visual parameters
    moduleV->SetLineColor(TColor::GetColor("#ff47ca"));
    moduleV->SetTransparency(20);
 
    return moduleV;
}
//------------------------------------------------------------------------------