create_rootgeom_SiProf_Run9.C

Go to the documentation of this file.

/*
 * Use this macro to create basic ROOT geometry of Silicon Beam Profilometer
 * (SiProf) for the RUN-9 configuration (2 stations)
 *
 * Author: Baranov D.
 * Created: 25.04.2025
 *
 * WARNING: all units is in cm!!!
 */
 
// Set Parameters of SiProf --------------------------------------------------------
const Int_t NStations = 2;     // stations in the detector
const Int_t NMaxModules = 1;   // max. number of modules in a station
 
// X-position of geometrical center of sensor
const Double_t XStationPositions[NStations] = {
    -0.066,   // st. 0 (-0.196 + 0.13)
    +0.349,   // st. 1 (+0.079 + 0.27)
};
 
// Y-position of geometrical center of sensor
const Double_t YStationPositions[NStations] = {
    +0.083,   // st. 0 (+0.013 + 0.07)
    +0.279,   // st. 1 (+0.139 + 0.14)
};
 
// Z-position of sensor side, closest to the beam
const Double_t ZStationPositions[NStations] = {
    -303.198,   // st. 0 (-303.168 - 0.03)
    -103.956,   // st. 1 (-104.026 - (-0.07))
};
 
//(X-Y-Z)Shifts of modules in each station
const Double_t XModuleShifts[NStations][NMaxModules] = {
    {0.0},   // st. 0
    {0.0},   // st. 1
};
const Double_t YModuleShifts[NStations][NMaxModules] = {
    {0.0},   // st. 0
    {0.0},   // st. 1
};
const Double_t ZModuleShifts[NStations][NMaxModules] = {
    {0.0},   // st. 0
    {0.0},   // st. 1
};
 
// Rotations of stations around Z (deg.)
const Double_t ZStationRotations[NStations][NMaxModules] = {
    {-0.111},   // st. 0 (-(90 - 89.889))
    {+0.080},   // st. 1 (-(90 - 90.080))
};
 
// Sizes of elements (cm) -------------------------------------------------------
 
// Sensor sizes
const Double_t XSensSize = 6.08;    // cm
const Double_t YSensSize = 6.08;    // cm
const Double_t ZSensSize = 0.018;   // cm
//------------------------------------------------------------------------------
 
// GeoManager
TGeoManager* gGeoMan = NULL;
 
// media
TGeoMedium* pMedAir = 0;
TGeoMedium* pMedCarbon = 0;
TGeoMedium* pMedFiberGlass = 0;
TGeoMedium* pMedSilicon = 0;
TGeoMedium* pMedAluminium = 0;
TGeoMedium* pMedSteel = 0;
 
class FairGeoMedia;
class FairGeoBuilder;
 
TGeoVolume* CreateStation(TString station_name);
TGeoVolume* CreateModule(TString module_name);
TGeoVolume* CreateVacuumTube(TString vacTube_name);
 
void DefineRequiredMedia(FairGeoMedia* geoMedia, FairGeoBuilder* geoBuild)
{
 
    // air medium
    FairGeoMedium* mAir = geoMedia->getMedium("air");
    if (!mAir)
        Fatal("Main", "FairMedium air not found");
    geoBuild->createMedium(mAir);
    pMedAir = gGeoManager->GetMedium("air");
    if (!pMedAir)
        Fatal("Main", "Medium air not found");
 
    // carbon medium
    FairGeoMedium* mCarbon = geoMedia->getMedium("carbon");
    if (!mCarbon)
        Fatal("Main", "FairMedium carbon not found");
    geoBuild->createMedium(mCarbon);
    pMedCarbon = gGeoManager->GetMedium("carbon");
    if (!pMedCarbon)
        Fatal("Main", "Medium carbon not found");
 
    // fiberglass medium
    FairGeoMedium* mFiberGlass = geoMedia->getMedium("fiberglass");
    if (!mFiberGlass)
        Fatal("Main", "FairMedium fiberglass not found");
    geoBuild->createMedium(mFiberGlass);
    pMedFiberGlass = gGeoManager->GetMedium("fiberglass");
    if (!pMedFiberGlass)
        Fatal("Main", "Medium fiberglass not found");
 
    // silicon medium
    FairGeoMedium* mSilicon = geoMedia->getMedium("silicon");
    if (!mSilicon)
        Fatal("Main", "FairMedium silicon not found");
    geoBuild->createMedium(mSilicon);
    pMedSilicon = gGeoManager->GetMedium("silicon");
    if (!pMedSilicon)
        Fatal("Main", "Medium silicon not found");
 
    // aluminium medium
    FairGeoMedium* mAluminium = geoMedia->getMedium("aluminium");
    if (!mAluminium)
        Fatal("Main", "FairMedium aluminium not found");
    geoBuild->createMedium(mAluminium);
    pMedAluminium = gGeoManager->GetMedium("aluminium");
    if (!pMedAluminium)
        Fatal("Main", "Medium aluminium not found");
 
    // steel medium
    FairGeoMedium* mSteel = geoMedia->getMedium("steel");
    if (!mSteel)
        Fatal("Main", "FairMedium steel not found");
    geoBuild->createMedium(mSteel);
    pMedSteel = gGeoManager->GetMedium("steel");
    if (!pMedSteel)
        Fatal("Main", "Medium steel not found");
}
 
void create_rootgeom_SiProf_Run9()
{
 
    // ----  set working directory  --------------------------------------------
    TString gPath = gSystem->Getenv("VMCWORKDIR");
 
    // -------   Geometry file name (output)   ----------------------------------
    const TString geoDetectorName = "SiProf";
    const TString geoDetectorVersion = "Run9";
    const TString geoFileName = gPath + "/geometry/" + geoDetectorName + "_" + geoDetectorVersion + ".root";
 
    // ----  global geometry parameters  ---------------------------------------
    FairGeoLoader* geoLoad = new FairGeoLoader("TGeo", "FairGeoLoader");
    FairGeoInterface* geoFace = geoLoad->getGeoInterface();
 
    // -------   Load media from media file   ----------------------------------
    TString medFile = gPath + "/geometry/media.geo";
    geoFace->setMediaFile(medFile);
    geoFace->readMedia();
    FairGeoMedia* geoMedia = geoFace->getMedia();
    FairGeoBuilder* geoBuild = geoLoad->getGeoBuilder();
 
    DefineRequiredMedia(geoMedia, geoBuild);
    // -------------------------------------------------------------------------
 
    // --------------   Create geometry and top volume  ------------------------
    gGeoMan = (TGeoManager*)gROOT->FindObject("FAIRGeom");
    gGeoMan->SetName(geoDetectorName + "_geom");
    TGeoVolume* top = new TGeoVolumeAssembly("TOP");
    top->SetMedium(pMedAir);
    gGeoMan->SetTopVolume(top);
    // gGeoMan->SetTopVisible(1);
    //  -------------------------------------------------------------------------
 
    // Define TOP Geometry
    TGeoVolume* SiProf = new TGeoVolumeAssembly(geoDetectorName);
    SiProf->SetMedium(pMedAir);
 
    for (Int_t istation = 0; istation < NStations; ++istation) {
        // for(Int_t istation = 0; istation < 1; ++istation) {
 
        Int_t stationNum = istation;   // station number
 
        TGeoVolume* station = CreateStation(TString("station") + TString::Itoa(stationNum, 10));
 
        TGeoVolume* module0 = CreateModule(TString("module0_") + station->GetName());
 
        TGeoVolume* vacuumTube = CreateVacuumTube(TString("vacuumTube_") + station->GetName());
 
        TGeoCombiTrans* module0_transform = new TGeoCombiTrans();
        module0_transform->RotateZ(ZStationRotations[stationNum][0]);
        module0_transform->SetTranslation(XModuleShifts[stationNum][0], YModuleShifts[stationNum][0],
                                          ZModuleShifts[stationNum][0] + 0.5 * ZSensSize);
 
        TGeoCombiTrans* station_transform = new TGeoCombiTrans();
        station_transform->SetTranslation(XStationPositions[stationNum], YStationPositions[stationNum],
                                          ZStationPositions[stationNum]);
 
        station->AddNode(module0, 0, new TGeoCombiTrans(*module0_transform));
        // station->AddNode(vacuumTube, 0, new TGeoCombiTrans(*module0_transform));
 
        SiProf->AddNode(station, 0, station_transform);
    }
 
    top->AddNode(SiProf, 0);
    top->SetVisContainers(kTRUE);
 
    // ---------------   Finish   -----------------------------------------------
    gGeoMan->CloseGeometry();
    gGeoMan->CheckOverlaps(0.0001);
    gGeoMan->PrintOverlaps();
    gGeoMan->Test();
    // gGeoMan->RestoreMasterVolume();
 
    TFile* geoFile = new TFile(geoFileName, "RECREATE");
    top->Write();
    geoFile->Close();
    top->Draw("ogl");
}
 
TGeoVolume* CreateStation(TString station_name)
{
 
    TGeoVolume* stationA = new TGeoVolumeAssembly(station_name);
    stationA->SetMedium(pMedAir);
 
    return stationA;
}
 
TGeoVolume* CreateModule(TString module_name)
{
 
    // shapes
    TGeoShape* moduleS = new TGeoBBox(TString("moduleS") += TString("_") + module_name, XSensSize * 0.5,
                                      YSensSize * 0.5, ZSensSize * 0.5);
 
    // volumes
    TGeoVolume* moduleV = new TGeoVolume(TString("SiProfSensor") += TString("_") + module_name, moduleS);
 
    // medium
    if (pMedSilicon) {
        moduleV->SetMedium(pMedSilicon);
    } else
        Fatal("Main", "Invalid medium for moduleV volumes!");
 
    // volume visual property
    moduleV->SetLineColor(TColor::GetColor("#ff47ca"));
    moduleV->SetTransparency(30);
 
    return moduleV;
}
 
TGeoVolume* CreateVacuumTube(TString vacTube_name)
{
 
    // shapes
    TGeoShape* vacTubeS =
        new TGeoTube(TString("vacTubeS") += TString("_") + vacTube_name, 19.6 * 0.5, 20.0 * 0.5, 20.0 * 0.5);
    TGeoShape* vacTubeHoleS =
        new TGeoTube(TString("vacTubeHoleS") += TString("_") + vacTube_name, 0.0, 15.0 * 0.5, 10. * 0.5);
 
    TGeoShape* sideTubeS =
        new TGeoTube(TString("sideTubeS") += TString("_") + vacTube_name, 14.6 * 0.5, 15.0 * 0.5, 20.8 * 0.5);
    TGeoShape* sideTubeCutS =
        new TGeoTube(TString("sideTubeCutS") += TString("_") + vacTube_name, 0.0, 19.6 * 0.5, 20.0 * 0.5);
 
    TGeoShape* vacTubeFlangeS =
        new TGeoTube(TString("vacTubeFlangeS") += TString("_") + vacTube_name, 20.0 * 0.5, 24.0 * 0.5, 1.2 * 0.5);
    TGeoShape* sideTubeFlangeS =
        new TGeoTube(TString("sideTubeFlangeS") += TString("_") + vacTube_name, 15.0 * 0.5, 18.0 * 0.5, 1.2 * 0.5);
 
    TGeoCombiTrans* vacTubeHole_transf = new TGeoCombiTrans();
    vacTubeHole_transf->SetName(TString("vacTubeHole_transf") += TString("_") + vacTube_name);
    vacTubeHole_transf->RotateY(90.0);
    vacTubeHole_transf->SetDx(-10.0);
    vacTubeHole_transf->SetDy(0.0);
    vacTubeHole_transf->SetDz(0.0);
    vacTubeHole_transf->RegisterYourself();
 
    TGeoCompositeShape* vacTubeWithHoleS = new TGeoCompositeShape();
    vacTubeWithHoleS->SetName(TString("vacTubeWithHoleS") += TString("_") + vacTube_name);
    {
        TString expression = "vacTubeS";
        expression += TString("_") + vacTube_name;
        expression += "-vacTubeHoleS";
        expression += TString("_") + vacTube_name;
        expression += ":vacTubeHole_transf";
        expression += TString("_") + vacTube_name;
        vacTubeWithHoleS->MakeNode(expression);
        vacTubeWithHoleS->ComputeBBox();   // need to compute a bounding box
    }
 
    TGeoCombiTrans* sideTube_transf = new TGeoCombiTrans();
    sideTube_transf->SetName(TString("sideTube_transf") += TString("_") + vacTube_name);
    sideTube_transf->RotateY(90.0);
    sideTube_transf->SetTranslation(-20.8 * 0.5, 0.0, 0.0);
    sideTube_transf->RegisterYourself();
 
    TGeoCompositeShape* sideTubeWithCutS = new TGeoCompositeShape();
    sideTubeWithCutS->SetName(TString("sideTubeWithCutS") += TString("_") + vacTube_name);
    {
        TString expression = "sideTubeS";
        expression += TString("_") + vacTube_name;
        expression += ":sideTube_transf";
        expression += TString("_") + vacTube_name;
        expression += "-sideTubeCutS";
        expression += TString("_") + vacTube_name;
        sideTubeWithCutS->MakeNode(expression);
        sideTubeWithCutS->ComputeBBox();   // need to compute a bounding box
    }
 
    // volumes
    // frame volumes
    TGeoVolumeAssembly* vacTubeBoxV = new TGeoVolumeAssembly(vacTube_name);
    TGeoVolume* vacTubeWithHoleV =
        new TGeoVolume(TString("vacTubeWithHoleV") += TString("_") + vacTube_name, vacTubeWithHoleS);
    TGeoVolume* sideTubeWithCutV =
        new TGeoVolume(TString("sideTubeWithCutV") += TString("_") + vacTube_name, sideTubeWithCutS);
    TGeoVolume* vacTubeFlangeV =
        new TGeoVolume(TString("vacTubeFlangeV") += TString("_") + vacTube_name, vacTubeFlangeS);
    TGeoVolume* sideTubeFlangeV =
        new TGeoVolume(TString("sideTubeFlangeV") += TString("_") + vacTube_name, sideTubeFlangeS);
 
    // volume medium
    TGeoMedium* vacTubeWithHoleV_medium = nullptr;
    if (vacTube_name.Contains("station0"))
        vacTubeWithHoleV_medium = pMedSteel;
    if (vacTube_name.Contains("station1"))
        vacTubeWithHoleV_medium = pMedAluminium;
    if (vacTubeWithHoleV_medium) {
        vacTubeWithHoleV->SetMedium(vacTubeWithHoleV_medium);
        sideTubeWithCutV->SetMedium(vacTubeWithHoleV_medium);
        vacTubeFlangeV->SetMedium(vacTubeWithHoleV_medium);
        sideTubeFlangeV->SetMedium(vacTubeWithHoleV_medium);
    } else
        Fatal("Main", "Invalid medium for vacTubeWithHoleV!");
 
    // volume visual property (transparency)
    vacTubeWithHoleV->SetLineColor(TColor::GetColor("#ffcccc"));
    vacTubeWithHoleV->SetTransparency(0);
    sideTubeWithCutV->SetLineColor(TColor::GetColor("#ffcccc"));
    vacTubeFlangeV->SetLineColor(TColor::GetColor("#ffcccc"));
    sideTubeFlangeV->SetLineColor(TColor::GetColor("#ffcccc"));
 
    // part positions in the vacuum tube box
    TGeoCombiTrans* vacTubeFlangeV_transf[2];
 
    vacTubeFlangeV_transf[0] = new TGeoCombiTrans();
    vacTubeFlangeV_transf[0]->SetTranslation(0.0, 0.0, -20.0 * 0.5 + 1.2 * 0.5);
 
    vacTubeFlangeV_transf[1] = new TGeoCombiTrans();
    vacTubeFlangeV_transf[1]->SetTranslation(0.0, 0.0, +20.0 * 0.5 - 1.2 * 0.5);
 
    TGeoCombiTrans* sideTubeFlangeV_transf[1];
 
    sideTubeFlangeV_transf[0] = new TGeoCombiTrans();
    sideTubeFlangeV_transf[0]->RotateY(90.0);
    sideTubeFlangeV_transf[0]->SetTranslation(-20.8 + 1.2 * 0.5, 0.0, 0.0);
 
    vacTubeBoxV->AddNode(vacTubeWithHoleV, 0, new TGeoCombiTrans());
    vacTubeBoxV->AddNode(sideTubeWithCutV, 0, new TGeoCombiTrans());
    vacTubeBoxV->AddNode(vacTubeFlangeV, 0, vacTubeFlangeV_transf[0]);
    vacTubeBoxV->AddNode(vacTubeFlangeV, 1, vacTubeFlangeV_transf[1]);
    vacTubeBoxV->AddNode(sideTubeFlangeV, 0, sideTubeFlangeV_transf[0]);
 
    return vacTubeBoxV;
}
//------------------------------------------------------------------------------